Royal Enfield Motorcycle Accessories

Why Choose the Legundary Hector Crash Guard for Hunter 350? The Legundary Hunter Hector Crash Guard is designed specifically for the Royal Enfield Hunter 350, providing side protection for the engine and lower frame area. This crash guard is engineered for the Hunter 350 platform and is not listed as universal fitment. Model-Specific Compatibility – Royal Enfield Hunter 350 Designed exclusively for Royal Enfield Hunter 350 Structured mounting design Intended to align with factory chassis points Direct-fit installation (as implied) Compatibility beyond Hunter 350 is not mentioned and should not be assumed. Material & Construction Constructed from Mild Steel Designed to absorb impact and reduce direct damage Built for durability in everyday riding conditions Corrosion-resistant finish (as stated) Material thickness is not specified in the official listing. Integrated Slider Design The Hector Crash Guard includes a side-mounted slider, intended to: Reduce direct engine casing contact during tip-overs Minimize scratching or surface damage Provide an additional impact point before the frame Clarification: The slider is designed for controlled impact situations such as low-speed falls. It is not intended to eliminate damage in high-speed collisions. Protection Scope This crash guard is intended to: Provide side protection to engine and lower chassis Support urban riding and touring use Add structural reinforcement during minor drops Scope clarification: Designed to reduce damage during low to moderate impact situations. Not intended for high-speed crash protection. Intended Use Suitable for: Daily commuting Urban riding Touring Riders seeking added side protection Installation Designed for direct mounting Professional installation recommended for proper torque alignment Product Specifications Brand: Legundary Product Name: Hunter Hector Crash Guard Motorcycle Compatibility: Royal Enfield Hunter 350 Material: Mild Steel Application: Engine & Frame Side Protection Finish: Black

Read more less

Why Choose the Vambrace Bash Plate for Royal Enfield Hunter 350? The Vambrace Bash Plate (Silver) is designed specifically for the Royal Enfield Hunter 350, offering underside engine and sump protection against road debris, stones, and uneven terrain. This is a model-specific bash plate engineered for the Hunter 350 platform. Model-Specific Compatibility – Royal Enfield Hunter 350 Designed exclusively for Royal Enfield Hunter 350 Precision-fit mounting design Bolt-on installation (as stated) Structured to align with the motorcycle’s lower frame geometry Compatibility beyond Hunter 350 is not mentioned and should not be assumed. Material & Construction Constructed from High-Quality Aluminium Designed for lightweight durability Corrosion-resistant build Intended to provide strong underside protection without adding excessive weight Material thickness is not specified in the official listing. Protection Scope The Vambrace Bash Plate is intended to: Protect the engine sump area Shield lower frame components Reduce exposure to rocks, debris, and minor impacts Support daily commuting, touring, and mild off-road riding Scope clarification:This bash plate is designed to reduce damage from debris and minor impacts. It is not intended to prevent damage in high-speed collisions or severe impacts. Design & Finish Finish: Silver Designed to complement the Hunter 350’s rugged profile Adds a functional and aesthetic lower-body presence Weight Approximate Weight: 0.595 kg Intended Use Suitable for: Daily commuting Touring Urban riding Light off-road conditions Installation Bolt-on installation Designed for direct mounting Professional installation recommended for proper alignment and torque Product Specifications Brand: Vambrace Product Type: Bash Plate Motorcycle Compatibility: Royal Enfield Hunter 350 Material: Aluminium Finish: Silver Weight: 0.595 kg Installation Type: Bolt-On

Read more less

Why Choose the Legundary Oculus Shield for Royal Enfield Hunter 350? The Legundary Oculus Headlight Shield is designed specifically for the Royal Enfield Hunter 350, providing frontal headlight protection without obstructing light output. This is a model-specific headlight shield engineered for the Hunter 350 platform. Model-Specific Compatibility – Royal Enfield Hunter 350 Designed exclusively for Royal Enfield Hunter 350 Structured to align with factory headlight assembly Direct fit installation (as stated) Intended for secure mounting without modification Compatibility beyond Hunter 350 is not mentioned and should not be assumed. Material & Construction Constructed using Mild Steel Shield panel made from Polycarbonate Designed for durability and impact resistance Powder-coated black finish The transparent polycarbonate shield is designed to maintain headlight visibility while providing a protective barrier. Dimensions & Weight Dimensions: 20 x 18 x 0.2 cm (L x B x H) Weight: 0.320 kg Color: Black Protection Scope The Oculus Shield is intended to: Provide protection against stones and road debris Reduce exposure to minor impacts Maintain maximum headlight visibility Important Installation Note (as mentioned):Ensure sufficient gap between the headlight and shield during installation to avoid direct contact. Scope clarification:This product is designed to reduce damage from debris and minor impacts. It is not intended to prevent damage in high-speed collisions. Design Features Transparent polycarbonate panel Minimal weight construction Designed to avoid obstructing headlight beam pattern Structured metal mounting frame Intended Use Suitable for: Daily commuting Touring Urban riding Riders seeking additional headlight protection Product Specifications Brand: Legundary Product Name: Oculus Headlight Shield Motorcycle Compatibility: Royal Enfield Hunter 350 Material: Mild Steel + Polycarbonate Finish: Black Dimensions: 20 x 18 x 0.2 cm Weight: 0.320 kg

Read more less

Why Choose the Legundary Back Rest with Carrier for Hunter 350? The Legundary Back Rest with Carrier is designed specifically for the Royal Enfield Hunter 350, combining pillion back support with a rear luggage mounting platform in a single structure. This is a model-specific component engineered for the Hunter 350 and is not listed as universal fitment. Model-Specific Compatibility – Royal Enfield Hunter 350 Designed exclusively for Royal Enfield Hunter 350 Structured to align with factory mounting points Intended for direct installation Integrated backrest and carrier design Compatibility beyond Hunter 350 is not stated and should not be assumed. Material & Construction Constructed from Mild Steel Backrest finished with Foam and Rexine Powder-coated black finish Designed for durability and corrosion resistance Material thickness is not specified in the official listing. Dimensions & Weight Dimensions: 40 x 28 x 29 cm (L x B x H) Product Weight: 3.100 kg Color: Black Dual Function Design This unit integrates: 1️⃣ Pillion Back Support Foam-cushioned backrest Rexine covering Intended to improve pillion comfort during rides 2️⃣ Rear Carrier Platform Metal base for luggage mounting Suitable for light luggage or top box (compatibility to be verified before purchase) Load capacity is not specified in the listing and should be confirmed before heavy-duty usage. Intended Use Suitable for: Touring riders Riders carrying pillion passengers Daily commuting with luggage Mounting soft bags or top boxes Installation Designed for direct mounting on Hunter 350 Professional installation recommended for proper torque and alignment Product Specifications Brand: Legundary Product Name: Back Rest with Carrier Motorcycle Compatibility: Royal Enfield Hunter 350 Material: Mild Steel + Foam + Rexine Finish: Black Dimensions: 40 x 28 x 29 cm Weight: 3.100 kg

Read more less

Brushed Matte Performance Slip-On Exhaust for Interceptor 650 & Continental GT 650 The Red Rooster Matte Stellar Exhaust is engineered for Royal Enfield Interceptor 650 and Continental GT 650 riders who prefer understated performance with a rugged, tool-grade aesthetic. Built from Grade 304 stainless steel and finished in a brushed, non-reflective matte texture, the Matte Stellar combines free-flow performance gains with a durable, corrosion-resistant construction designed for long-term ownership. This variant is intended for riders who value mechanical honesty over shine. It delivers the signature Red Rooster exhaust character — deep, throaty, and engaging — while maintaining a low-glare finish that blends seamlessly into both classic and modern builds. Performance without flash. Presence without excess. Grade 304 Stainless Steel Construction The Matte Stellar is manufactured using premium Grade 304 stainless steel, chosen for its durability and resistance to corrosion under repeated thermal stress. Material advantages include: • High resistance to oxidation• Structural stability under heat cycling• Long-term durability in humid or dusty conditions• Corrosion-proof stainless composition Grade 304 stainless is widely used in performance exhaust systems because it maintains structural integrity under high exhaust temperatures and constant vibration exposure. This ensures the exhaust remains reliable across years of riding. Brushed Matte Finish – Stealth & Functional The brushed matte surface provides a non-reflective, industrial appearance that complements blacked-out builds and minimalist styling themes. Finish characteristics include: • Non-glare surface• Scratch-tolerant brushed texture• Rugged, tool-grade aesthetic• Resistance to visible swirl marks Unlike polished surfaces, the brushed finish hides minor wear patterns better over time, making it ideal for riders who put serious miles on their motorcycles. The finish is engineered to maintain appearance even after prolonged heat exposure. Free-Flow Internal Architecture At the core of the Matte Stellar is Red Rooster’s proven free-flow internal structure. Designed to reduce restrictive back pressure, the system improves exhaust gas evacuation efficiency compared to stock mufflers. Performance-oriented characteristics may include: • Sharper throttle response• Improved mid-range torque feel• Freer engine breathing• More responsive acceleration The internal design is tuned specifically for the 650 twin-cylinder platform to enhance rideability without sacrificing smoothness. Actual gains depend on riding conditions, fuel quality, altitude, and engine configuration. No ECU remap is required for installation. Deep, Throaty Acoustic Character The Matte Stellar delivers the recognizable Red Rooster exhaust tone — rich, controlled, and mechanically engaging. Sound characteristics may include: • Strong low-frequency rumble• Balanced cruising tone without harshness• Controlled resonance at highway RPM• Sporty acceleration note The system is engineered to provide depth without excessive drone, making it suitable for both city riding and extended highway use. Sound output may vary depending on riding conditions and local regulations. Lightweight & TIG-Welded Precision The exhaust features TIG-welded joints to ensure structural consistency and long-term durability. TIG welding provides: • Strong, precise weld seams• High vibration resistance• Clean construction lines• Long-term reliability The lightweight structure contributes to reduced rear-end bulk compared to many stock systems, potentially improving mass distribution. Handling impact varies depending on full motorcycle setup. Direct Bolt-On Fitment The Matte Stellar is designed for direct installation on: Royal Enfield Interceptor 650Royal Enfield Continental GT 650 Installation features: • Direct bolt-on compatibility• No cutting required• No welding required• Retains stock headers Mounting aligns with OEM specifications for straightforward fitment. Professional installation is recommended to ensure proper torque and sealing. Built for Hard Miles This variant is ideal for riders who prioritize durability and subtlety. Well suited for: • Daily commuting• Touring builds• Blacked-out custom setups• Riders seeking long-term durability• Minimalist café projects The brushed matte surface is designed to age gracefully, maintaining a consistent appearance even after extended use. Variants Available Royal Enfield Interceptor 650Royal Enfield Continental GT 650 Selection is made on the product page. Fitment is specific to the 650 Twin platform. Warranty & Important Notes Finish & Structure: Lifetime Warranty (Matte Variant) Heat Cycling:Repeated heat exposure may cause light gold to blue tinting on pipes. This is a normal characteristic of stainless steel under thermal cycling and is not considered a defect. Always verify compliance with local noise regulations before installation. Technical Overview Material: Grade 304 Stainless SteelFinish: Brushed MatteConstruction: TIG-WeldedType: Slip-On ExhaustFitment: Interceptor 650 / Continental GT 650Installation: Direct Bolt-On (No Remap Required)

Read more less

Red Rooster Rumbler Ace Exhaust for Royal Enfield Meteor 350 The Red Rooster Rumbler Ace is specifically engineered for the Royal Enfield exhaust Meteor 350 platform. It balances the classic single-cylinder character with controlled performance refinement. This exhaust enhances exhaust flow while retaining the usable low- and mid-range torque. This torque range is where the Meteor actually lives, ensuring a natural riding experience. Constructed using high-grade stainless steel, the Rumbler Ace focuses heavily on durability. It offers excellent thermal stability and long-term consistency, especially under touring conditions. Its internal flow design delivers a deep, bass-heavy exhaust note. This note is free from harsh crackle or fatigue, making it perfect for both daily riding and extended highway runs. This exhaust serves as a direct replacement, designed to integrate seamlessly with the Meteor 350’s stock mounting points. No electronic tuning, ECU remap, or irreversible modification is required. The upgrade is mechanically honest, preserving rideability while sharpening acoustic presence and throttle response. Riders will enjoy a refined sound and enhanced performance without sacrificing reliability. Finish options are available as variants to match individual build preferences. This allows riders to customize the look of their exhaust to suit their style. Whether polished or matte, the finishes maintain a premium appearance. Each finish enhances the overall aesthetics of the Royal Enfield Meteor 350. Specifications Brand: Red Rooster Performance Product Type: Slip-On Performance Exhaust Material: Stainless Steel Construction: Single-piece canister with internal baffle design Mounting: Direct bolt-on replacement Weight: Approximately 2.65 kg Heat Resistance: High-temperature resistant construction ECU Requirement: Not required Finish Options: Select via variant Performance and Design Features of Royal Enfield exhaust The Rumbler Ace exhaust has been developed with a focus on clean and efficient exhaust flow. Optimizing flow helps improve throttle response in everyday riding scenarios. Its internal baffle design enhances sound quality without generating unwanted noise. The deep, controlled exhaust note complements the Meteor 350’s engine character perfectly. By maintaining the low- and mid-range torque, the exhaust enhances the Meteor’s natural riding rhythm. It does not push for peak dyno numbers but rather prioritizes rideability. This makes the bike easier to control in city traffic and on long rides. It provides balanced performance improvements suitable for all riders. Durability and Materials The exhaust is built from premium stainless steel to withstand harsh riding environments. This material selection ensures resistance to corrosion, heat, and wear. The high-temperature resistant construction helps the exhaust maintain its shape and function over time. Touring riders especially benefit from the consistent performance on long journeys. The single-piece canister with internal baffle design simplifies mounting and reduces potential points of failure. This design choice adds to the durability and robustness of the product. The bolt-on replacement approach means fewer fittings and no modification hassles for riders. Royal Enfield exhaust Compatibility and Installation This exhaust is designed exclusively for the Royal Enfield Meteor 350, ensuring perfect fitment. There is no need for additional electronic tuning or ECU remapping. The Rumbler Ace installs directly using the stock mounting points. This makes installation straightforward and convenient for both professionals and enthusiasts. Since no permanent changes are required, the exhaust can be easily reverted to stock if needed. The bolt-on design reduces installation time and eliminates compatibility concerns. This characteristic makes the Rumbler Ace a highly practical upgrade with minimal risk. Finish Options and Customization To suit different aesthetic preferences, the exhaust is offered in multiple finish variants. Riders can choose from polished, matte, or black finishes. Each finish is designed to maintain a high-quality look while matching various motorcycle styles. These options allow motorcyclists to personalize their Meteor 350’s appearance easily. The finish options also provide added protection against the elements. The polished finish shines with a classic appeal, while the matte and black finishes offer a modern, stealthy look. Riders are encouraged to select the variant that best fits their build and style choices. Summary of Royal Enfield exhaust The Red Rooster Rumbler Ace exhaust is a well-engineered upgrade designed for the Royal Enfield exhaust Meteor 350. It improves exhaust flow and sound without sacrificing torque or rideability. Constructed from durable stainless steel, it is built to last and withstand demanding conditions. The direct bolt-on replacement design makes installation simple, requiring no ECU changes. With options for different finishes, the Rumbler Ace allows riders to customize their bike’s look while improving acoustic and throttle response. This exhaust perfectly balances classic single-cylinder character with modern performance needs. It is ideal for those seeking a lasting, reliable, and refined upgrade for their Meteor 350.

Read more less

Red Rooster Polestar Pro Slip-On Exhaust for Royal Enfield Classic 350 Reborn (J-Series) Engineered specifically for the Royal Enfield Classic 350 Reborn platform, the Red Rooster Performance Polestar Pro Exhaust is expertly designed to enhance your riding experience. This exhaust system delivers a controlled, deep exhaust note that stands out without overpowering. It features improved flow characteristics for better engine breathing and long-term durability, ensuring consistent performance throughout its lifespan. Manufactured using high-grade SS304 stainless steel, the Polestar Pro exhaust reflects a commitment to quality. The material choice offers superior structural rigidity that helps withstand daily wear and tear. It is also highly resistant to heat and corrosion, giving riders peace of mind on long journeys and in varying weather conditions. The internal flow design of this exhaust supports smoother evacuation of exhaust gases. This improvement contributes to a more responsive throttle, ensuring you can rely on consistent mid-range power output. Despite the performance upgrades, the Polestar Pro retains excellent rideability, making it suitable for both city commutes and highway runs without compromise. Designed as a direct replacement unit, the exhaust maintains factory mounting points for hassle-free installation. This design perfectly balances the bike’s weight and overall aesthetics. Whether you use it for daily riding or long-distance travel, the Polestar Pro delivers a refined mechanical sound that complements the Classic 350 Reborn’s character without sounding harsh or uncontrolled. Fitment & Compatibility of the Red Rooster Polestar Pro Exhaust This exhaust is compatible exclusively with the Royal Enfield Classic 350 Reborn, powered by the J-Series engine. It is important to note that it is not compatible with older Classic 350 UCE models or any non-J-Series platforms. This careful targeting ensures the best possible fit and performance for the Roosters who choose this product. Owners of the Classic 350 Reborn can expect seamless integration with their bikes, ensuring a perfect match that enhances both aesthetics and functionality. The exclusive fitment guarantees the durability and reliability expected from a high-quality slip-on exhaust system built by Red Rooster. Red Rooster Polestar Pro Exhaust Specifications Brand: Red Rooster Performance Product Line: Polestar Pro Exhaust Type: Slip-on replacement Material: SS304 stainless steel Construction: Welded stainless steel body Finish Options: Black, Polish (variant-based) Weight: Approx. 3.01 kg Mounting Type: Direct bolt-on Heat Resistance: High Rust Resistance: Yes ECU Remap Required: No The strong construction of the exhaust ensures it withstands high temperatures and environmental exposure. Riders can choose between black or polished finishes, both offering excellent durability. These aesthetic options allow the roosters to customize their bikes while maintaining performance integrity. Weight is kept minimal at approximately 3.01 kg, so it does not negatively affect the bike’s handling. The direct bolt-on installation means there is no need for cutting or welding, making it accessible for all levels of mechanical skill. Notably, the Red Rooster exhaust does not require an ECU remap, simplifying installation and use. Installation Guide for Red Rooster Performance Polestar Pro Exhaust The Polestar Pro exhaust features direct bolt-on installation using factory mounting points. This approach eliminates the need for cutting, welding, or ECU tuning. Most riders will find the upgrade straightforward and convenient, enabling quick and clean fitting with basic tools. For best results, professional installation is recommended. This ensures optimal alignment, correct torque settings, and avoids potential installation errors. Proper mounting also preserves exhaust performance and sound quality while protecting the motorcycle's frame and components. What’s Included with the Red Rooster Polestar Pro Exhaust? 1 × Red Rooster Performance Polestar Pro Exhaust (selected finish variant) Required mounting hardware for direct installation Every unit includes all necessary hardware for a smooth mounting process. This inclusive package helps roosters avoid additional purchases or delays due to missing components. With everything on hand, the installation experience is as efficient as possible. The Red Rooster Polestar Pro Exhaust is designed for riders who demand quality, performance, and style. With its red detailing branding included subtly on the exhaust, this part attracts not just the roosters looking for improvement but anyone who appreciates engineering excellence. Upgrade your Classic 350 Reborn today to experience the perfect blend of sound, durability, and ease.

Read more less

BMC FM01138 High-Performance Air Filter for Royal Enfield 350 J-Series Designed for Royal Enfield’s modern 350cc J-Series platform, the BMC FM01138 high-performance air filter delivers improved airflow, consistent filtration, and long service life compared to conventional paper filters. This advanced Royal Enfield air filter optimizes engine performance through superior design and quality materials. Riders will notice better throttle response and smoother engine operation with this filter installed. The careful engineering ensures your bike breathes easier. Manufactured using BMC’s signature oiled cotton gauze construction, this cylindrical air filter allows the engine to breathe more freely. The filter provides precise filtration, preventing dirt and debris from entering your engine. This balance ensures a clean air supply while maximizing airflow and enhancing performance. Such engineering leads to stable combustion and reliable operation in various riding conditions. Whether navigating busy city traffic, cruising highways, or touring long distances, this filter proves effective and durable. The FM01138 is designed for durability and long-term use. It is washable and reusable, which reduces the need for frequent replacements. This feature lowers maintenance costs while maintaining consistent performance over time. The washable design allows easy cleaning and upkeep to keep your engine in optimal condition. Additionally, the air filter is engineered as a direct replacement for the stock filter on Royal Enfield 350 J-Series motorcycles. Installation requires no modifications, making the swap straightforward and convenient. Fitment & Compatibility of Royal Enfield Air Filter This Royal Enfield air filter is compatible with motorcycles equipped with the 350cc J-Series engine. It fits a range of popular models built around this engine platform. This compatibility allows riders of different J-Series bikes to benefit from improved airflow and filtration. Ensuring exact fitment helps the filter perform as intended and helps extend engine life. Classic 350 Reborn Bullet 350 (J-Series) Meteor 350 Hunter 350 Goan Classic 350 BMC specifies compatible model years for the J-Series platform. It is essential to verify that your motorcycle’s engine platform matches these requirements. Confirming the proper fit will maximize the upgrade benefits and protect the engine's integrity. Specifications of BMC Royal Enfield Air Filter Brand: BMC BMC Part Number: FM01138 Filter Type: Cylindrical performance air filter Filter Material: Oiled cotton gauze Construction: Multi-layer cotton with rubber molded ends Internal Base Diameter: 51 mm External Base Diameter: 90 mm Height: 104 mm Washable & Reusable: Yes Installation Type: Direct replacement Warranty: 2 years limited manufacturer warranty The use of multi-layer cotton combined with rubber molded ends enhances both filtration and durability. The dimensions are carefully designed to fit precisely in place of the stock air filter. The FM01138 offers excellent resistance to wear and tear. It is a reliable component for your bike’s air intake system, ensuring clean and efficient air flow at all times. Durability and Maintenance of the Royal Enfield Air Filter The washable and reusable features of this filter are major advantages. Regular cleaning keeps the filter functioning at peak efficiency while maintaining airflow consistency. BMC’s oiled cotton gauze construction traps smaller particles than standard filters. This improved filtration protects your engine and supports better overall performance. Maintenance involves gently washing and re-oiling the filter to restore its filtering ability. Such care lowers long-term expenses, making this filter a cost-effective upgrade. Routine servicing maintains excellent airflow characteristics. This supports optimal combustion and engine health throughout its service life. What’s Included with Your Royal Enfield Air Filter Purchase 1 × BMC FM01138 High-Performance Air Filter Each purchase includes the air filter unit, ready for direct replacement installation. It arrives prepared for an easy swap with your bike’s original air filter. This minimizes downtime and installation complexity. Choosing the BMC FM01138 means equipping your Royal Enfield 350 J-Series with a high-quality, proven air filter solution trusted by riders.

Read more less

The NGage Hyper Flow Air Filter for Royal Enfield UCE 350 and UCE 500 is a reusable performance air filter element developed for Royal Enfield motorcycles built on the UCE (Unit Construction Engine) platform. This air filter is designed as a direct replacement for the stock paper air filter used in select Royal Enfield 350 cc and 500 cc models. This listing covers only the NGage Hyper Flow Air Filter specified for Royal Enfield UCE 350 and UCE 500 motorcycles, as shown on the manufacturer’s product page and compatibility panel. Designed for Royal Enfield UCE Engines NGage specifies this Hyper Flow Air Filter for motorcycles using the Royal Enfield UCE engine architecture. These engines were used across multiple Royal Enfield models in both 350 cc and 500 cc displacements. As per the compatibility list displayed on the product page, this air filter is suitable for the following motorcycles: Royal Enfield Classic 350 (UCE) Royal Enfield Thunderbird 350 Royal Enfield Bullet 350 Royal Enfield Electra 350 Royal Enfield Classic 500 Royal Enfield Thunderbird 500 Royal Enfield Bullet 500 This air filter is intended to replace the stock air filter element in the factory airbox of these motorcycles without modification. Hyper Flow Cotton Gauze Filter Construction NGage classifies this product as a Hyper Flow Air Filter using a cotton gauze–based filtering medium. From the product information shown: The filter media is described as cotton gauze. The cotton gauze is supported by a molded filter structure designed to maintain its shape inside the factory airbox. The cotton material is described as washable and reusable. NGage does not publish pore size, filtration micron rating, airflow percentage improvement, or comparative efficiency values versus the OEM paper filter. No quantitative airflow or power increase figures are stated by the manufacturer. Reusable and Serviceable Design The NGage Hyper Flow Air Filter is described as a washable and reusable air filter element. Unlike disposable paper air filters that are replaced at each service interval, this filter is intended to be cleaned and reused periodically according to maintenance needs. The product page shows an optional accessory: Air Filter Recharge Oil (optional add-on) This indicates that the filter is designed to be serviced using a cleaning and re-oiling process, similar to conventional cotton-gauze performance air filters. NGage does not publish a fixed cleaning interval.Service frequency will depend on: Riding environment Dust levels Road conditions Mileage covered Intended Function Air filters regulate the flow of intake air into the engine while trapping dust and debris. As stated on the product page: The filter is designed to allow improved airflow compared to stock paper filters. The cotton gauze material is described as enabling airflow while capturing dirt and debris. The filter is intended to protect the engine from contaminants while maintaining intake airflow. NGage does not publish any claims regarding: Horsepower increase Torque gain Fuel economy improvement Emissions reduction This air filter is not positioned as a tuning or racing-only component. Fitment and Installation The NGage Hyper Flow Air Filter is designed as a direct-fit replacement for the stock air filter used in Royal Enfield UCE 350 and 500 motorcycles listed in the compatibility section. No cutting, trimming, or airbox modification is shown or stated. The product page indicates: Hassle-free installation Direct stock replacement No installation tools or fitting complexity are specified by NGage. Durability and Testing From the icons and text shown on the product page, NGage states: Best durability Eco-friendly product 100% organic cotton as filtering media Extensively tested on all terrains Lifetime replacement warranty (10,000 km) No further test methodology, cycle counts, or laboratory data are published. Compatibility As per the NGage product page and compatibility panel: Royal Enfield UCE 350 Models Classic 350 Thunderbird 350 Bullet 350 Electra 350 Royal Enfield UCE 500 Models Classic 500 Thunderbird 500 Bullet 500 Variant Explanation This listing is for NGage Hyper Flow Air Filter for Royal Enfield UCE 350 & 500 only. No alternate sizes, shapes, or engine-specific variants are shown or specified on the manufacturer’s product page. Specifications (Only Verified Data) Brand: NGage Product Type: Hyper Flow Air Filter Filter Media: Cotton gauze Reusable: Yes Washable: Yes Recharge Oil Required: Yes (optional add-on) Installation Type: Direct replacement Application: Motorcycle air filter Compatibility: Royal Enfield UCE 350 & 500 models Warranty: Lifetime replacement warranty (10,000 km) Testing Claim: Extensively tested on all terrains Installation / Usage Notes Install only on Royal Enfield UCE 350 and UCE 500 motorcycles listed above. Designed to fit inside the stock airbox. Clean and re-oil the filter using suitable air filter cleaning solution and recharge oil. Service frequency depends on riding conditions and dust exposure.

Read more less

NGage HB 155 / HBS 155 Front Brake Pads for Royal Enfield UCE, J-Platform & Himalayan 411 – Ceramic & Sintered Options (Front Only) The NGage HB 155 and HBS 155 front brake pads are disc brake pads developed for select Royal Enfield motorcycles where this exact pad shape and specification is required for the front brake caliper position. These brake pads are listed by NGage for use on multiple Royal Enfield models that share a common front brake pad format. As per the official NGage brake pad compatibility chart, the following motorcycles use pad code HB 155 (Whisker Ceramic) or HBS 155 (Sintered) at the front: Royal Enfield Thunderbird 350 UCE Royal Enfield Thunderbird 500 UCE Royal Enfield Classic 350 UCE Royal Enfield Classic 500 UCE Royal Enfield Electra 350 UCE Royal Enfield Electra 500 UCE Royal Enfield Meteor 350 Royal Enfield Hunter 350 Royal Enfield Classic 350 Reborn Royal Enfield Himalayan 411 This listing covers the front brake pad set only for the above motorcycles. Brake pads are a critical safety component in any motorcycle braking system. Their function is to generate controlled friction against the brake disc when hydraulic pressure is applied through the brake caliper. The correct pad shape, thickness, and friction compound specification are essential for proper fitment, even braking force distribution, and predictable braking response. The NGage HB 155 and HBS 155 pads are manufactured to match the mounting dimensions and backing plate profile specified for the front brake calipers used on the listed Royal Enfield models. These pads are intended as direct-replacement components and are not designed to alter brake caliper geometry, disc size, or braking system architecture. Pad Code Structure & Fitment Logic Brake pad codes define the physical shape and mounting interface of the brake pad. Only pads with the exact matching code should be used in a given brake caliper. For the models covered under this listing: HB 155 corresponds to the Whisker Ceramic variant HBS 155 corresponds to the Sintered variant Both variants share the same physical dimensions, backing plate profile, and mounting points. The only difference between the two is the friction material composition. Using the correct pad code is essential. Installing brake pads with a different shape or specification may result in improper seating, uneven wear, brake noise, reduced braking efficiency, or brake system damage. Variant Explanation This product is available in two NGage material variants: HB 155 – Whisker Ceramic Brake PadsThis variant uses a ceramic-based friction compound reinforced with fiber-like whisker elements. It is listed by NGage as “HB – Whisker Ceramic Pads.” This compound type is generally intended for standard street riding conditions where controlled braking behavior and stable pad performance are required. HBS 155 – Sintered Brake PadsThis variant uses a metallic sintered friction compound. It is listed by NGage as “HBS – Sintered Pads.” Sintered pads are typically selected for applications where higher thermal stability is required, such as heavier motorcycles, sustained braking loads, or mixed riding environments. Both variants are identical in shape, fitment, and mounting dimensions. Only the friction material differs. Intended Application & Compatibility Context The NGage HB 155 and HBS 155 front brake pads are specified only for motorcycles where this exact pad code is listed in official NGage compatibility documentation. This listing applies strictly to the front brake caliper position on the following motorcycles: Royal Enfield Thunderbird 350 UCE – Front Royal Enfield Thunderbird 500 UCE – Front Royal Enfield Classic 350 UCE – Front Royal Enfield Classic 500 UCE – Front Royal Enfield Electra 350 UCE – Front Royal Enfield Electra 500 UCE – Front Royal Enfield Meteor 350 – Front Royal Enfield Hunter 350 – Front Royal Enfield Classic 350 Reborn – Front Royal Enfield Himalayan 411 – Front Compatibility applies only when HB 155 or HBS 155 is the recommended front brake pad specification. Motorcycles using a different pad code should not use this model, even if engine displacement or platform appears similar. Installation & Service Considerations Brake pads are routine service components and should be replaced according to the motorcycle manufacturer’s recommended service intervals or when pad thickness reaches the wear limit. Installation should be carried out following standard brake service procedures, including: Cleaning the brake caliper and pad guide surfaces Verifying brake disc condition Correctly seating the pads in the caliper Applying proper tightening torque to mounting hardware Performing a bed-in procedure after installation Improper installation may affect braking performance or cause premature wear. Professional installation is recommended for riders who are not familiar with motorcycle brake system service procedures. Summary The NGage HB 155 and HBS 155 front brake pads are direct-replacement brake pads designed for select Royal Enfield motorcycles where this exact pad shape and specification is required. Available in Whisker Ceramic and Sintered variants, these pads provide two friction material options while maintaining identical fitment geometry. Correct specification matching and proper installation are essential prior to use. Compatibility (Front Only) As per NGage’s official compatibility chart: Royal Enfield Thunderbird 350 UCE Royal Enfield Thunderbird 500 UCE Royal Enfield Classic 350 UCE Royal Enfield Classic 500 UCE Royal Enfield Electra 350 UCE Royal Enfield Electra 500 UCE Royal Enfield Meteor 350 Royal Enfield Hunter 350 Royal Enfield Classic 350 Reborn Royal Enfield Himalayan 411 Variant Explanation Whisker Ceramic (HB 155): Ceramic-based friction compound Sintered (HBS 155): Metallic sintered friction compound Both variants share identical fitment and mounting dimensions Specifications  Brand: NGage Product Type: Motorcycle brake pads Position: Front Pad Codes: HB 155 (Whisker Ceramic), HBS 155 (Sintered) Compatibility: Royal Enfield models listed above Certification Marking: ARAI Tested  Manufacturing Origin: Japan  Installation / Usage Notes Install only in the front brake caliper position Use only the specified pad code for your motorcycle Perform bed-in procedure after installation Professional installation recommended

Read more less

Rolon Brass Chain & Sprocket Kit for Royal Enfield Meteor 350, Hunter 350 & Classic 350 Reborn (J-Platform) The Rolon Brass Chain & Sprocket Kit is a matched final-drive replacement set developed specifically for Royal Enfield J-platform 350 motorcycles. This includes: Royal Enfield Meteor 350Royal Enfield Hunter 350Royal Enfield Classic 350 (Reborn / J-Series) These motorcycles share a common J-platform drivetrain architecture. This kit is engineered to align with that platform’s original equipment geometry, maintaining correct pitch, sprocket tooth profile, chain alignment, and drivetrain load distribution. This is a direct-replacement drivetrain kit. It is not a universal chain kit and must not be installed on non–J-platform Royal Enfield motorcycles. Platform-Specific Fitment – J-Series Only Royal Enfield’s J-platform introduced a revised engine and drivetrain configuration compared to older UCE-era motorcycles. Differences include sprocket alignment, carrier geometry, and drivetrain layout. This Rolon kit is designed strictly for J-platform 350cc motorcycles. Compatible Models: Royal Enfield Meteor 350Royal Enfield Hunter 350Royal Enfield Classic 350 (Reborn / J-Platform) Not Compatible With: Classic 350 (UCE platform – drum or disc variants)Bullet 350 UCERoyal Enfield 500 modelsHimalayan 411 / 450Any non–J-platform Royal Enfield motorcycles ⚠️ This kit is designed only for Royal Enfield J-platform 350 motorcycles. It must not be installed on UCE-era Classic or Bullet models. Correct platform identification is critical. Chain pitch and sprocket alignment differ across generations. Chain Construction – Brass-Coated Steel The drive chain supplied in this kit features steel construction with a brass surface coating. The brass coating serves multiple functions: Improved resistance to surface oxidationReduced susceptibility to moisture-related corrosionEnhanced surface durability compared to untreated steel chainsSupport for smoother long-term operation under similar riding conditions The chain maintains OEM-spec pitch and roller dimensions for J-platform drivetrains. Correct pitch alignment is essential for maintaining smooth sprocket engagement and minimizing premature wear. The brass coating does not alter drivetrain geometry. It serves as a protective surface treatment over the steel structure. Front & Rear Sprocket Construction The front and rear sprockets included in this kit are manufactured from hardened steel and cut to match OEM mounting geometry used on J-platform motorcycles. Sprocket accuracy directly influences: Chain engagement consistencyLoad distribution across teethDrivetrain smoothnessWear uniformity Incorrect tooth profile or pitch mismatch can accelerate chain wear and produce uneven drivetrain behaviour. This Rolon kit maintains OEM-spec tooth count and geometry for J-platform alignment. Both sprockets are designed to integrate directly with factory mounting points and carriers used on Meteor 350, Hunter 350, and Classic 350 (Reborn). Why Replace as a Matched Set Chain and sprockets wear together as a system. Installing a new chain on worn sprockets — or vice versa — can accelerate uneven wear and reduce service life. This kit is supplied as a matched drivetrain set to maintain: Uniform wear patternsProper chain tension behaviourBalanced load distributionConsistent final-drive performance Replacing all three components together supports drivetrain longevity and stable power transfer. Kit Contents 1 × Rolon Brass-Coated Drive Chain1 × Front Sprocket1 × Rear Sprocket Supplied as a matched final-drive set. Construction & Material Overview Chain: Steel constructionBrass surface coatingOEM-spec pitch and roller dimensions Sprockets: Hardened steel constructionOEM-spec tooth profileDesigned for J-platform sprocket carriers Verified Specifications Brand: RolonProduct Type: Motorcycle chain & sprocket kitApplication: Final drive replacementChain Type: Brass-coated steel chainPlatform Compatibility: Royal Enfield J-platform 350ccPosition: Front + Rear drivetrainVehicle Compatibility: Meteor 350, Hunter 350, Classic 350 (Reborn) Installation & Usage Notes Install only on Royal Enfield J-platform 350 motorcyclesAlways replace chain and sprockets together as a matched setEnsure correct chain slack adjustment after installationVerify rear wheel alignmentLubricate chain after installation and at regular service intervalsProfessional installation recommended Incorrect chain tension or misalignment may affect drivetrain longevity. Summary The Rolon Brass Chain & Sprocket Kit is a platform-specific final-drive replacement set engineered for Royal Enfield J-platform 350 motorcycles including the Meteor 350, Hunter 350, and Classic 350 (Reborn). With a brass-coated steel chain and hardened OEM-spec sprockets, the kit maintains correct pitch alignment, tooth engagement, and drivetrain load distribution defined for the J-series platform. Strictly for J-platform models.Matched set replacement.Correct geometry. Reliable final drive.

Read more less

NGage HB 163 / HBS 163 Rear Brake Pads for Royal Enfield Models – Ceramic & Sintered Options (Rear Only) The NGage HB 163 and HBS 163 rear brake pads are disc brake pads developed for select Royal Enfield motorcycles where this exact pad shape and specification is required for the rear brake caliper position. These brake pads are listed by NGage for use on multiple Royal Enfield models that share a common rear brake pad format across the UCE, J-platform, 450cc, and 650cc families. As per the official NGage brake pad compatibility chart, the following motorcycles use pad code HB 163 (Whisker Ceramic) or HBS 163 (Sintered) at the rear: Royal Enfield Thunderbird 350 (UCE) Royal Enfield Thunderbird 500 (UCE) Royal Enfield Classic 350 (UCE) Royal Enfield Classic 500 (UCE) Royal Enfield Electra 350 (UCE) Royal Enfield Electra 500 (UCE) Royal Enfield Meteor 350 Royal Enfield Hunter 350 Royal Enfield Classic 350 Reborn Royal Enfield Himalayan 411 Royal Enfield Himalayan 450 Royal Enfield Guerrilla 450 Royal Enfield Interceptor 650 Royal Enfield Continental GT 650 This listing covers the rear brake pad set only for the above motorcycles. Brake pads are a critical safety component in any motorcycle braking system. Their role is to generate friction against the brake disc when hydraulic pressure is applied through the brake caliper. Correct brake pad selection depends on the physical pad shape, backing plate profile, mounting geometry, and friction material specification defined for a given brake caliper design. The NGage HB 163 and HBS 163 pads are manufactured to match the mounting dimensions and backing plate geometry specified for the rear brake calipers used on the listed Royal Enfield models. These pads are intended as direct-replacement components and are not designed to alter brake caliper geometry, disc size, or braking system architecture. Pad Code Structure & Fitment Logic Brake pad codes define the physical shape and mounting interface of the brake pad. Only pads with the exact matching code should be used in a given brake caliper. For the motorcycles covered under this listing: HB 163 corresponds to the Whisker Ceramic variant HBS 163 corresponds to the Sintered variant Both variants share the same physical dimensions, backing plate profile, and mounting points. The only difference between the two is the friction material composition. Using the correct pad code is essential. Installing brake pads with a different shape or specification may result in improper seating, uneven wear, brake noise, reduced braking efficiency, or brake system damage. Variant Explanation This product is available in two NGage material variants: HB 163 – Whisker Ceramic Brake PadsCeramic-based friction compound reinforced with whisker fibers.Listed by NGage as “HB – Whisker Ceramic Pads.”Designed for controlled braking feel and stable performance under standard road-use conditions. HBS 163 – Sintered Brake PadsMetallic sintered friction compound.Listed by NGage as “HBS – Sintered Pads.”Designed for higher thermal stability and consistent braking under sustained load. Both variants are identical in shape, fitment, and mounting dimensions.Only the friction material composition differs. Intended Application & Compatibility Context The NGage HB 163 and HBS 163 rear brake pads are specified only for motorcycles where this exact pad code is listed in official NGage compatibility documentation. This listing applies strictly to the rear brake caliper position on the following motorcycles: Royal Enfield Thunderbird 350 (UCE) – Rear Royal Enfield Thunderbird 500 (UCE) – Rear Royal Enfield Classic 350 (UCE) – Rear Royal Enfield Classic 500 (UCE) – Rear Royal Enfield Electra 350 (UCE) – Rear Royal Enfield Electra 500 (UCE) – Rear Royal Enfield Meteor 350 – Rear Royal Enfield Hunter 350 – Rear Royal Enfield Classic 350 Reborn – Rear Royal Enfield Himalayan 411 – Rear Royal Enfield Himalayan 450 – Rear Royal Enfield Guerrilla 450 – Rear Royal Enfield Interceptor 650 – Rear Royal Enfield Continental GT 650 – Rear Compatibility applies only when HB 163 or HBS 163 is the recommended rear brake pad specification. Motorcycles using a different pad code should not use this model, even if engine displacement or platform appears similar. Installation & Service Considerations Brake pads are routine service components and should be replaced according to the motorcycle manufacturer’s recommended service intervals or when pad thickness reaches the wear limit. Installation should be carried out following standard brake service procedures, including: Cleaning the brake caliper and pad guide surfaces Verifying brake disc condition Correctly seating the pads in the caliper Applying proper tightening torque to mounting hardware Performing a bed-in procedure after installation Improper installation may affect braking performance or cause premature wear. Professional installation is recommended for riders who are not familiar with motorcycle brake system service procedures. Summary The NGage HB 163 and HBS 163 rear brake pads are direct-replacement brake pads designed for select Royal Enfield motorcycles where this exact pad shape and specification is required. Available in Whisker Ceramic and Sintered variants, these pads provide two friction material options while maintaining identical fitment geometry. Correct specification matching and proper installation are essential prior to use. Compatibility (Rear Only) As per NGage’s official compatibility chart: Royal Enfield Thunderbird 350 (UCE) Royal Enfield Thunderbird 500 (UCE) Royal Enfield Classic 350 (UCE) Royal Enfield Classic 500 (UCE) Royal Enfield Electra 350 (UCE) Royal Enfield Electra 500 (UCE) Royal Enfield Meteor 350 Royal Enfield Hunter 350 Royal Enfield Classic 350 Reborn Royal Enfield Himalayan 411 Royal Enfield Himalayan 450 Royal Enfield Guerrilla 450 Royal Enfield Interceptor 650 Royal Enfield Continental GT 650 Variant Explanation Whisker Ceramic (HB 163): Ceramic-based friction compound Sintered (HBS 163): Metallic sintered friction compound Both variants share identical fitment and mounting dimensions Specifications  Brand: NGage Product Type: Motorcycle brake pads Position: Rear Pad Codes: HB 163 (Whisker Ceramic), HBS 163 (Sintered) Compatibility: Royal Enfield models listed above Certification Marking: ARAI Tested  Manufacturing Origin: Japan  Installation / Usage Notes Install only in the rear brake caliper position Use only the specified pad code for your motorcycle Perform bed-in procedure after installation Professional installation recommended

Read more less

NGage HB 155 / HBS 155 Rear Brake Pads for Royal Enfield Super Meteor 650 & Shotgun 650 – Ceramic & Sintered Options (Rear Only) The NGage HB 155 and HBS 155 rear brake pads are disc brake pads designed for Royal Enfield motorcycles that use this exact pad shape and mounting specification at the rear brake caliper. These brake pads are specified for the Royal Enfield Super Meteor 650 and Royal Enfield Shotgun 650 in the rear brake position. Both motorcycles share the same rear brake pad format, allowing a single pad code to be used across both models. This listing covers the rear brake pad set only for these two motorcycles. Brake Pad Function & Fitment Logic Brake pads are a core wear component in a motorcycle’s braking system. Their role is to generate friction against the brake disc when hydraulic pressure is applied through the brake caliper. For proper braking behavior, brake pads must match the exact backing plate shape, thickness, and mounting profile specified for the brake caliper design used on the motorcycle. NGage brake pad codes define this physical geometry. Only pads with the correct code should be installed in a given caliper. For the motorcycles covered under this listing: HB 155 represents the Whisker Ceramic variant HBS 155 represents the Sintered variant Both variants share identical dimensions and mounting features. The only difference between the two is the friction material composition. Using the correct pad code is essential. Installing pads with a different shape or specification can lead to improper seating, uneven pad wear, brake noise, inconsistent braking response, or long-term damage to braking components. Variant Explanation This product is available in two NGage material variants: HB 155 – Whisker Ceramic Brake PadsThis variant uses a ceramic-based friction compound reinforced with whisker fibers. It is classified by NGage as a Whisker Ceramic brake pad. The compound is designed to provide stable braking behavior and consistent friction characteristics under standard road riding conditions. HBS 155 – Sintered Brake PadsThis variant uses a metallic sintered friction compound. It is classified by NGage as a Sintered brake pad. Sintered pads are manufactured using fused metallic powders and are typically selected where higher thermal stability and consistent braking behavior under sustained load are required. Both variants are identical in shape, fitment, and mounting dimensions.Only the friction material composition differs between HB and HBS variants. Intended Application The NGage HB 155 and HBS 155 rear brake pads are direct-replacement components for the rear brake calipers used on the Royal Enfield Super Meteor 650 and Royal Enfield Shotgun 650. These brake pads are not universal and are not interchangeable with other NGage pad codes such as HB 163, HB 164, or HB 184. They are intended strictly for motorcycles that specify pad code HB 155 or HBS 155 at the rear. Installation & Service Considerations Brake pads are routine service components and should be replaced according to the motorcycle manufacturer’s recommended service intervals or when pad thickness reaches the wear limit. Installation should follow standard brake service procedures, including: Cleaning the brake caliper and pad guide surfaces Inspecting the brake disc for wear or scoring Seating the pads correctly within the caliper Tightening mounting hardware to the correct torque Performing a bed-in procedure after installation Improper installation can result in brake noise, uneven wear, or inconsistent braking response. Professional installation is recommended for riders who are not familiar with motorcycle brake system service procedures. Summary The NGage HB 155 and HBS 155 rear brake pads are direct-replacement brake pads designed for Royal Enfield 650cc motorcycles that use this exact rear pad format. Available in Whisker Ceramic and Sintered variants, these pads provide two friction material options while maintaining identical fitment geometry. Correct specification matching and proper installation are essential prior to use. Compatibility (Rear Only) Royal Enfield Super Meteor 650 Royal Enfield Shotgun 650 Variant Explanation Whisker Ceramic (HB 155): Ceramic-based friction compound Sintered (HBS 155): Metallic sintered friction compound Both variants share identical fitment and mounting dimensions Specifications Brand: NGage Product Type: Motorcycle brake pads Position: Rear Pad Codes: HB 155 (Whisker Ceramic), HBS 155 (Sintered) Compatibility: Royal Enfield Super Meteor 650, Royal Enfield Shotgun 650 Certification Marking: ARAI Tested Manufacturing Origin: Japan Installation / Usage Notes Install only in the rear brake caliper position Use only the specified pad code for your motorcycle Perform bed-in procedure after installation Professional installation recommended

Read more less

The Moto Torque Himalayan 450 Engine Guard (Aluminium) is specifically engineered for the Royal Enfield Himalayan 450 to protect the lower engine area from impact and surface damage. Designed as a sump guard solution, it shields the underside of the motorcycle during off-road riding and challenging terrain conditions. Manufactured using high-quality aluminium material, this engine guard mounts directly to the stock mounting points without compromising ground clearance. The structure is designed to maintain proper fitment while providing effective underbody protection. Made for Royal Enfield Himalayan 450 • Designed specifically for Himalayan 450• Mounts to stock mounting points• Maintains ground clearance• Protects the engine underside Functional Protection Provides protection from: • Off-road surface impact• Underbody abrasion• Harsh terrain riding• External debris contact Great protection from the harshness of off-road riding. Tested & Approved Tested and approved by CH SADDLER (Instagram name), a renowned Adventure Off-road rider. Installation Details • Direct stock mounting compatibility• Comes with “Do It Yourself” fitment guide Tools Required • Allen Key – 4 & 5mm• Spanner – Number 10 Compatibility Note This product is not compatible with the OEM guard. Specifications • Brand: Moto Torque• Compatibility: Royal Enfield Himalayan 450• Type: Engine Guard / Sump Guard• Material: Aluminium

Read more less

Moto Torque Air Filter for Royal Enfield Interceptor 650, Continental GT 650 & Bear 650 The Moto Torque Performance Air Filter is precision-built for Royal Enfield Interceptor 650, Continental GT 650, and Bear 650 motorcycles. Designed for twin-cylinder performance platforms, this air filter enhances intake airflow while maintaining filtration integrity for consistent engine performance. Engineered to meet the demands of Royal Enfield 650cc motorcycles, the filter supports improved combustion efficiency, throttle response, and long-term riding performance across city, highway, and touring conditions. Designed for Royal Enfield 650 Platform • Royal Enfield Interceptor 650• Royal Enfield Continental GT 650• Royal Enfield Bear 650• Twin-cylinder 650 engine compatibility Model-specific fitment ensures structural precision and consistent sealing within the airbox. Engineered Features 4-Layer High-Flow Cotton GauzeConstructed with four layers of precision-woven cotton gauze to improve intake flow while maintaining filtration integrity. Supports optimized combustion and sustained power output. Multi-Stage Filtration EfficiencyCaptures fine dust, debris, and airborne contaminants without restricting airflow. Designed for varied riding environments including urban traffic and open highways. Reusable & Serviceable DesignBuilt for longevity and sustainability. The filter can be cleaned, re-oiled, and reused — reducing replacement frequency and maintenance costs. Heat-Resistant & Structurally ReinforcedEngineered to withstand elevated temperatures and vibration stress typical of twin-cylinder engines. Enhanced Throttle Response & Engine EfficiencyBy reducing intake resistance, the filter promotes smoother throttle input, cleaner combustion, and improved fuel efficiency. Performance Profile by Motorcycle Royal Enfield Interceptor 650Supports smoother torque delivery and consistent cruising performance. Royal Enfield Continental GT 650Designed to complement aggressive acceleration and high-rev responsiveness. Royal Enfield Bear 650Reinforces airflow stability and engine endurance for long-haul touring. Specifications • Brand: Moto Torque• Product Type: Performance Air Filter• Compatibility: Interceptor 650 / Continental GT 650 / Bear 650• Construction: 4-Layer Cotton Gauze• Design: Reusable & Serviceable• Engine Type: Twin-Cylinder 650cc

Read more less

The Legundary Royal Enfield Guerrilla 450 Gopher Luggage Carrier with Mild Steel Plate is designed specifically for the Royal Enfield Guerrilla 450. Built from high-quality mild steel, this luggage carrier provides stable and reliable support for carrying luggage during daily rides and long-distance touring. Engineered for proper weight distribution and structural stability, the carrier ensures your luggage remains secure without affecting the motorcycle’s balance. The black powder-coated finish enhances durability while maintaining a rugged and clean appearance suited for the Guerrilla 450. Key Features High-Strength Mild Steel ConstructionManufactured using durable mild steel to handle luggage loads with structural stability. Black Powder-Coated FinishCorrosion-resistant coating helps protect against rust and environmental exposure. Stable Luggage PlatformFlat mounting surface with slot design allows secure fastening of soft luggage or compatible top box systems. Precision Fit for Guerrilla 450Designed specifically for the Royal Enfield Guerrilla 450 to ensure proper alignment and secure installation. Touring-Ready DesignBuilt to enhance load-carrying capacity while maintaining the motorcycle’s original styling. Specifications • Brand: Legundary• Compatibility: Royal Enfield Guerrilla 450• Material: Mild Steel• Finish: Black Powder Coated• Dimensions: 50 x 39 x 7• Weight: 2.464 kg• Product Type: Luggage Carrier

Read more less

The Legundary Royal Enfield Guerrilla 450 Bazooka Crash Guard is engineered specifically for the Royal Enfield Guerrilla 450. Built from strong mild steel, this crash guard is designed to provide protection to the engine and body during falls or collisions. With a corrosion-resistant finish and a rugged construction, it balances durability with a purposeful design suited for everyday riding and urban conditions. Key Features Heavy-Duty ProtectionBuilt from strong mild steel to provide impact protection for the engine and body panels during accidental drops or collisions. Corrosion-Resistant CoatingFinished with a corrosion-resistant coating to enhance durability and resistance against rust in varying weather conditions. Robust ConstructionDesigned to withstand regular road use while maintaining structural integrity. Custom Fit for Guerrilla 450Precision designed specifically for the Royal Enfield Guerrilla 450 for proper fitment without compromising performance. Styling & PresenceAdds a rugged, adventure-inspired look while maintaining practical functionality. Specifications • Brand: Legundary• Compatibility: Royal Enfield Guerrilla 450• Material: Mild Steel• Finish: Corrosion-Resistant Coating• Color: Black• Dimensions: 26 x 17 x 42• Weight: 2.326 kg• Product Type: Crash Guard

Read more less

Moto Torque Air Filter for Royal Enfield Himalayan 450 and Guerrilla 450 The Moto Torque Performance Air Filter is engineered specifically for Royal Enfield Himalayan 450 and Royal Enfield Guerrilla 450 motorcycles. Designed for the Royal Enfield 450cc evolution platform, this air filter enhances airflow while maintaining strong filtration integrity for consistent engine performance. Built to handle both adventure touring and street riding demands, the filter supports optimized intake flow, improved combustion efficiency, and long-term engine protection across varied riding conditions. Designed for Royal Enfield 450 Platform • Royal Enfield Himalayan 450• Royal Enfield Guerrilla 450• 450cc single-cylinder engine compatibility• Model-specific precision fitment Ensures proper sealing and alignment within the stock airbox system. Engineered Features 4-Layer High-Flow Cotton GauzeConstructed with four layers of high-flow cotton gauze to deliver increased air intake without compromising filtration. Supports strong combustion and consistent power delivery. Multi-Stage Filtration EfficiencyCaptures fine dust, dirt, and airborne contaminants while maintaining unrestricted airflow. Suitable for dusty trails, off-road terrain, and city traffic. Reusable & Serviceable DesignWashable, re-oilable, and reusable construction reduces replacement frequency and supports eco-friendly maintenance. Heat-Resistant & Structurally ReinforcedEngineered to withstand elevated temperatures and vibration typical of the 450cc single-cylinder platform. Enhanced Throttle Response & EfficiencyReduced intake resistance supports sharper throttle feel, cleaner combustion, and improved fuel economy. Performance Profile by Motorcycle Royal Enfield Himalayan 450Optimized for adventure touring, delivering reliable torque and endurance across rugged terrain. Royal Enfield Guerrilla 450Tuned for agile street performance, supporting responsive acceleration and smooth power delivery. Specifications • Brand: Moto Torque• Product Type: Performance Air Filter• Compatibility: Himalayan 450 / Guerrilla 450• Construction: 4-Layer Cotton Gauze• Design: Reusable & Serviceable• Engine Type: 450cc Single-Cylinder

Read more less

The Moto Torque Himalayan 450 Handlebar Risers are designed and crafted specifically for the Royal Enfield Himalayan 450 to improve rider comfort and handlebar positioning. Built for riders who demand ergonomic precision, these risers are engineered to enhance comfort without compromising handlebar strength or structural integrity. When it comes to handlebar positioning, every millimetre matters. Even a small adjustment can significantly impact long-distance comfort and reduce strain on the shoulders and lower back. These risers are developed to provide that precise improvement in riding posture. Designed for Royal Enfield Himalayan 450 • Specifically engineered for Himalayan 450• Direct fitment compatibility• Maintains handlebar strength and stability Material & Manufacturing • Made from solid Aluminium block• Precision machined using Computer Numerical Control (CNC) machines The use of a solid aluminium block ensures durability and strength, while CNC machining ensures accuracy and precision in dimensions. Comfort & Ergonomics • Improves riding posture• Reduces shoulder strain• Helps minimize lower back discomfort• Designed for daily riders and long-distance travellers These risers are developed to enhance comfort while maintaining control and handling performance. Specifications • Brand: Moto Torque• Compatibility: Royal Enfield Himalayan 450• Material: Solid Aluminium• Manufacturing: CNC Machined

Read more less

The Moto Torque Himalayan 450 Radiator Guard (SS) is designed and made specifically for the Royal Enfield Himalayan 450. Built using stainless steel 304 grade material, this radiator guard is engineered to protect the radiator from damage while enhancing the front and side profile of the motorcycle. Inspired by the Leopard design pattern, the guard delivers both structural protection and visual enhancement. Designed for Royal Enfield Himalayan 450 • Custom-built for Himalayan 450• Reverse engineered for precision fit• Seamless integration with the vehicle• Direct fitment design Material & Construction • Stainless Steel 304 Grade• Lifetime Warranty on material• Neatly buffed finish to highlight matte grain texture The stainless steel construction ensures durability and long-term resistance against corrosion. Functional Protection • Protects the radiator from damages• Ideal for riders who constantly ride off-road• Enhances front and side view appearance Designed to safeguard the radiator against debris, impact, and harsh riding conditions. Design & Outlook • Inspired by Leopard design• Enhances motorcycle aesthetics• Precision-manufactured for exact fitment Warranty • Lifetime Warranty on Stainless Steel 304 Grade Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy. Specifications • Brand: Moto Torque• Compatibility: Royal Enfield Himalayan 450• Material: Stainless Steel 304 Grade• Finish: Neatly buffed matte grain

Read more less

The Moto Torque Himalayan 450 Engine Guard (MS) is specifically designed for the Royal Enfield Himalayan 450 to provide protection against damage underneath the engine. Engineered using high-quality materials, this sump guard is developed to shield the lower engine area from impact during off-road riding and uneven terrain conditions. Designed to mount onto the stock mounting points, this engine guard is structured to maintain ground clearance while adding a protective barrier beneath the engine. Made for Royal Enfield Himalayan 450 This engine guard is designed exclusively for the Royal Enfield Himalayan 450 to ensure: • Direct compatibility with stock mounting points• Maintained ground clearance• Secure structural fitment• Protection beneath the engine casing Functional Protection The engine guard provides protection from: • Off-road surface impact• Underbody abrasion• Harsh terrain conditions• External debris contact It is built to support durability in demanding riding environments. Tested & Approved Tested and approved by CH SADDLER (Instagram name), a renowned Adventure Off-road rider. Installation Details • Designed to mount onto stock mounting points• Comes with “Do It Yourself” fitment guide Tools Required • Allen Key – 4 & 5mm• Spanner – Number 10 Compatibility Note This product is not compatible with the OEM guard. Specifications • Brand: Moto Torque• Compatibility: Royal Enfield Himalayan 450• Type: Engine Guard / Sump Guard• Material: MS (Mild Steel)

Read more less

The Moto Torque Himalayan 450 Saddle Stay (Yellow) is designed specifically for the Royal Enfield Himalayan 450 to provide structured support for saddle bags during touring and daily riding. Built using rigid mild steel tubing, this saddle stay is engineered to carry luggage weight while maintaining the motorcycle’s balance. This yellow variant maintains the same structural build and manufacturing standards while offering a bold visual complement to the Himalayan 450’s adventure styling. Made for Royal Enfield Himalayan 450 Manufactured exclusively for the Royal Enfield Himalayan 450, this saddle stay ensures: • Proper structural alignment• Secure mounting compatibility• Stable integration with the rear frame• Model-specific geometry fitment Material & Construction • Rigid Mild Steel – 19mm diameter tubes• Wall thickness: 1.6mm• Cold Rolled (CR) tubes for strength and durability The use of CR mild steel enhances rigidity and resistance against abrasion during operation. Manufacturing Process • MIG (Metal Inert Gas) Welding• TIG (Tungsten Inert Gas) Welding• Grid blasting before powder coating for uniform finish• Automated CNC tube bending for precision shaping These processes contribute to strength, finish quality, and structural consistency. Functional Design • Designed to support saddle bags during adventure touring• Maintains bike balance while carrying luggage• Lower stays that carry saddle bag weight are removable• Can be installed or removed according to rider requirements The structure is built to provide luggage support without affecting handling dynamics. Fasteners • Stainless Steel 304 grade nuts and bolts• Lifetime warranty on bolts & nuts Tools Required for Installation • Allen Key – 5 & 6mm• Spanner – 10 & 13 No. Warranty • 6 Months Paint/Powder Coating Warranty• Lifetime warranty on Bolts & Nuts Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy. Specifications • Brand: Moto Torque• Compatibility: Royal Enfield Himalayan 450• Tube Diameter: 19mm• Wall Thickness: 1.6mm• Material: Cold Rolled Mild Steel• Welding: MIG & TIG• Fasteners: Stainless Steel 304• Color: Yellow

Read more less

The Moto Torque Himalayan 450 Panther Crash Guard (Red) is designed specifically for the Royal Enfield Himalayan 450. Built using rigid mild steel tubing and engineered for durability, this crash guard is developed to help protect key structural components during demanding riding conditions. The red variant maintains the same structural build and manufacturing standards while offering a bold visual complement to the Himalayan 450’s adventure-focused styling. Made for Royal Enfield Himalayan 450 This crash guard is manufactured exclusively for the Royal Enfield Himalayan 450 to ensure: • Proper structural alignment• Secure installation compatibility• Stable frame integration• Model-specific geometry support Material & Construction • Rigid Mild Steel – 25mm diameter tubes• Wall thickness: 1.6mm and 2mm• Cold Rolled (CR) tubes for strength and durability The use of CR mild steel tubes enhances rigidity and impact resistance under operational conditions. Manufacturing Process • MIG (Metal Inert Gas) Welding• TIG (Tungsten Inert Gas) Welding• Sand Blasting before powder coating• Automated CNC tube bending for precision shaping These processes are used to ensure structural strength and uniform finish. Structural Protection Coverage Engineered to protect crucial and expensive motorcycle components including: • Fuel Tank• Engine casing• Frame• Handlebar• Other exposed structural parts Fasteners • Stainless Steel 304 grade nuts and bolts• Lifetime warranty on nuts and bolts Design & Product Outlook Designed to align with the aggressive and adventurous styling of the Himalayan 450 while maintaining structural integrity. The crash guard uses high-quality rigid material intended to withstand unfortunate crash situations. Tools Required for Installation • Allen Key – 5, 6 & 8mm• Spanner – 13, 16 and 14 No. Tubular Warranty • 6 Months Paint/Powder Coating Warranty• Lifetime warranty on Bolts & Nuts Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

The Moto Torque Himalayan 450 Panther Crash Guard (Yellow) is designed specifically for the Royal Enfield Himalayan 450. Built using rigid mild steel tubing and engineered for structural durability, this crash guard is developed to protect key motorcycle components during demanding riding conditions. This yellow variant retains the same structural specifications and engineering standards while offering a bold visual match to the Himalayan 450’s adventure profile. Made for Royal Enfield Himalayan 450 This crash guard is manufactured exclusively for the Royal Enfield Himalayan 450 platform to ensure: • Accurate structural alignment• Secure installation• Compatibility with factory geometry• Stable frame integration Material & Construction • Rigid Mild Steel – 25mm diameter tubes• Wall thickness: 1.6mm and 2mm• Cold Rolled (CR) tubes for strength and durability The use of CR mild steel tubes enhances structural integrity and impact resistance. Manufacturing Process • MIG (Metal Inert Gas) Welding• TIG (Tungsten Inert Gas) Welding• Sand Blasting before powder coating• Automated CNC tube bending for precision formation These processes are used to ensure proper strength, alignment, and uniform finish. Structural Protection Coverage Engineered to protect crucial and expensive components including: • Fuel Tank• Engine casing• Frame• Handlebar• Other exposed structural parts Fasteners • Stainless Steel 304 grade nuts and bolts• Lifetime warranty on nuts and bolts Design & Product Outlook Designed to match the aggressive and adventurous look of the motorcycle while maintaining structural rigidity. The crash guard uses high-quality rigid material intended to withstand unfortunate crash situations. Tools Required for Installation • Allen Key – 5, 6 & 8mm• Spanner – 13, 16 and 14 No. Tubular Warranty • 6 Months Paint/Powder Coating Warranty• Lifetime warranty on Bolts & Nuts Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less