The HJG C-188 4-Dot DRL 100W Projector Headlight is a complete 7-inch round headlight assembly designed for vehicles that support standard 7-inch headlight housings. Built around a projector lens setup, this headlight is intended for improved road illumination and enhanced daytime visibility compared to conventional halogen headlights. Key Features Model Code: C-188 (HJG series) 100W LED projector configuration for focused illumination Ultra-wide beam pattern for broader road coverage Integrated 4-dot DRL (Daytime Running Light) with white LED output 7-inch round headlight assembly – complete unit, not a bulb-only upgrade Distinct light signature when the DRL is active Lighting Performance This headlight uses a projector lens design to deliver a controlled and wide beam spread, helping improve forward and peripheral visibility during night riding and low-light conditions. The 100W LED setup is designed to provide consistent light output while maintaining efficient power usage compared to traditional halogen systems. The integrated 4-dot DRL surrounds the projector lens and remains visible during daytime operation, improving vehicle visibility to other road users. Fitment & Compatibility Designed for vehicles that accept standard 7-inch round headlight assemblies Commonly used on motorcycles and custom builds with 7-inch headlight mounts Final compatibility depends on mounting brackets and electrical connections Installation may require vehicle-specific adjustments What’s Included 1 × HJG C-188 7-Inch Projector Headlight Assembly Integrated LED projector and DRL (pre-assembled) Important Notes This is a complete headlight assembly, not a bulb replacement Confirm fitment and electrical compatibility before installation Professional installation is recommended for best results
Rs. 3,989.00
Product Overview of MOTO GENIUS Super Bright 100W LED Headlight The MOTO GENIUS Super Bright 100W LED Headlight Conversion Kit offers a super-efficient upgrade for motorcycles and cars. It is designed for riders and drivers looking to replace traditional halogen bulbs with a modern lighting solution. This kit fits the widely used H4 socket applications, working well with vehicles featuring a dual-beam single bulb setup. Using this genius LED headlight solution provides brighter, more energy-efficient lighting. It enhances visibility and safety during night rides or in low-light conditions. The plug-type design makes replacing original bulbs quick and hassle-free, perfect for users seeking an easy upgrade on their vehicles. Lighting Performance of MOTO GENIUS Super Bright 100W LED Headlight The lighting system inside this kit is precisely engineered with LEDs positioned to mirror the standard H4 beam alignment. This design ensures the maintenance of accurate low and high beam patterns when installed correctly. The manufacturer claims a powerful output capability reaching up to 100W. This strong light output improves forward visibility on highways and poorly lit roads, making night driving safer. This LED kit is ideal for users wanting a super bright, white light that outperforms traditional halogen bulbs in every aspect. With faster LED illumination, it improves reaction times and enhances overall driving and riding responsiveness. Build Quality & Cooling Features The MOTO GENIUS Super Bright 100W LED Headlight boasts a robust bulb body made of aluminum and steel. This superior material combination optimizes heat dissipation, extending both durability and lifespan. Additionally, it includes a built-in cooling system that actively manages temperature during extended use. Effective thermal management prevents overheating, ensuring steady and reliable lighting performance at all times. This cooling mechanism makes the kit highly dependable for everyday commutes and long-distance rides. The sturdy build is tailored to withstand rugged conditions, promoting long-term performance reliability. Installation & Vehicle Compatibility This led headlight conversion kit is designed specifically for H4 connectors. It allows quick installation without requiring permanent modifications to the vehicle. The kit is compatible with many common 12V electrical systems found in motorcycles and cars using dual-beam H4 bulbs. This product is supplied as a single LED bulb unit unless otherwise specified by sellers. The single-unit design simplifies replacement and retrofit work, eliminating complex installation procedures or additional components. Detailed Specifications of MOTO GENIUS Super Bright 100W LED Headlight Brand: Moto Genius Product Type: LED headlight conversion bulb Socket Type: H4 Power Output: Manufacturer-claimed up to 100W Operating Voltage: 12V DC Light Source: LED Application: Motorcycle & car headlight upgrade Housing Material: Aluminium & steel Cooling: Integrated heat dissipation system Installation Type: Plug-type replacement (H4) Fitment & Application Details The MOTO GENIUS Super Bright 100W LED Headlight kit fits vehicles utilizing H4 headlight sockets with 12V electrical systems. It is commonly applied to motorcycles equipped with H4 lamps and cars using dual-beam H4 headlights. This LED upgrade is not compatible with other bulb types such as H7, H11, or HB3. Users must confirm their vehicle’s bulb type before purchasing. Selecting the correct bulb type ensures optimal lighting performance and enhances driving safety. Important Usage Notes & Safety Information LED headlight conversions, including the MOTO GENIUS Super Bright 100W LED Headlight, might not be legal for road use in every region due to varying regulations. Beam alignment and glare control depend heavily on the original headlamp design and reflector. It is essential to install and align the LED headlight carefully, preventing glare that can affect other road users. Responsible usage according to local laws and guidelines is critical to maintain safety for everyone on the road.
Rs. 1,799.00
Product OverviewThe HJG GodsEye Helios is a 4-lens LED projector light designed for riders and drivers needing strong auxiliary illumination. Built with a quad-projector layout, the Helios ensures a controlled beam pattern. It focuses on forward throw with a useful peripheral spread. This makes it ideal for night riding, highway travel, and off-road conditions where extra lighting is vital. This model features a distinctive design with a white primary beam and a red DRL accent. The red DRL improves vehicle visibility and adds a unique front profile. The Helios is positioned as a supplemental lighting unit, not a certified OEM headlamp replacement. It caters to those looking to increase road safety with additional auxiliary lighting. Lighting Performance of the GodsEye Helios The four-lens projector configuration delivers a focused central beam with supportive peripheral spread. This setup provides better depth perception compared to single-lens auxiliary lights. The unit supports white beam operation with DRL functionality, depending on wiring configuration. The light’s output values are manufacturer-claimed and intended solely for auxiliary usage. This advanced lighting technology allows for precise light distribution, ideal for different riding scenarios. The GodsEye Helios excels at illuminating the road ahead while maintaining usable side visibility. This thoughtful beam design reduces glare for oncoming traffic, enhancing overall safety. GodsEye Build & Durability The Helios housing is made from die-cast aluminium, which efficiently manages heat dissipation during long operation. To protect the light, a polycarbonate lens is used on the front, providing impact resistance. The sealed construction holds an IP68 rating, ensuring dust and water protection. This durability allows reliable use in rain, mud, and dusty environments. Thanks to its rugged construction, the GodsEye Helios stands up well in various challenging off-road and on-road settings. The durable materials used exemplify the quality expected from such a high-performance auxiliary light. Installation & Application The light comes with an adjustable mounting bracket for flexible installation. You can fit it on crash guards, forks, bumpers, or other auxiliary mounts. It is compatible with standard 12V electrical systems. Cars, SUVs, motorcycles, and off-road vehicles can all make use of this versatile lighting option. While compatible with many vehicle types, this unit is not a direct plug-and-play replacement for OEM headlights. Proper installation is necessary to maximize performance and safety. The user should follow wiring guidelines carefully to enable DRL and white beam features. Specifications Brand: HJG Product Type: LED projector auxiliary light Lens Design: 4-lens projector layout Light Source: LED Operating Voltage: 12V DC Light Colour: White main beam + Red DRL Beam Pattern: Focused spot with supporting spread Housing Material: Die-cast aluminium Lens Material: Polycarbonate Ingress Protection: IP68 (dustproof & waterproof) Mounting Type: Adjustable bracket mount Application Position: Auxiliary / fog / supplemental headlight Pack Quantity: 1 unit Fitment & Application Clarity for GodsEye Lights The GodsEye Helios is suitable as an auxiliary or supplemental light on a variety of vehicles. It works well for motorcycles, cars, SUVs, and off-road utility vehicles. The universal 12V electrical compatibility simplifies integration across these platforms. It is important to note that this light is designed for auxiliary use only. It is not intended as a direct replacement for OEM headlights, such as those used in certified lighting systems. The light adds enhanced visibility and safety when used responsibly. Important Usage Note This light is intended for auxiliary or off-road use. Many local regulations restrict the use of high-intensity auxiliary lighting on public roads. Users should install and operate this lighting responsibly, following local laws to avoid penalties. Adding a cultural touch, the name "GodsEye" evokes ancient symbolism similar to that of the "god s eye," "huichol gods eye," and "mexican gods eye." These terms refer to traditional spiritual symbols that represent vigilance and protection. This product’s name captures the essence of enhanced vision and guarding the road ahead.
Rs. 4,899.00
The HJG GodsEye 5-Lens LED Projector Light is a high-output auxiliary projector light designed to improve forward visibility during night riding and low-light conditions. Built with a multi-lens projector layout, this unit focuses on delivering a wide and controlled beam pattern while maintaining a compact auxiliary lighting form factor. This projector light integrates a distinctive outer DRL ring with white and red light output, adding functional daytime visibility while maintaining a clean and purposeful appearance. It is designed for riders who require additional lighting support without relying solely on the stock headlight. Key Features Model: HJG GodsEye 5-lens LED projector configuration Focused beam pattern with improved spread Integrated outer DRL ring (White / Red) Designed as an auxiliary projector light Compact housing suitable for multiple mounting applications Lighting Performance The 5-lens projector design is intended to balance beam throw and width, helping illuminate both the road ahead and peripheral areas. This makes the HJG GodsEye LED projector light suitable for highway use, night riding, and conditions where stock lighting may feel insufficient. The projector layout helps concentrate light output more efficiently compared to basic reflector auxiliary lights. When used alongside the vehicle’s main headlamp, it supports improved depth perception and road clarity in darker environments. The integrated white and red DRL ring enhances vehicle visibility during daytime operation and adds a distinct lighting signature when the auxiliary light is active. Build and Design The HJG GodsEye projector light is housed in a compact metal body designed to handle regular riding conditions. The multi-lens layout is enclosed within a durable casing, helping protect the internal LED components during use. Its compact size allows flexible mounting options depending on the motorcycle’s crash guard, fork mount, or auxiliary light brackets. Fitment and Compatibility Designed as an auxiliary LED projector light Compatible with motorcycles supporting auxiliary light mounting Electrical compatibility depends on vehicle wiring and relay setup Final fitment depends on mounting brackets and available space This product is not a replacement for the main headlight and is intended to be used as a supporting lighting solution. What’s Included 1 × HJG GodsEye 5-Lens LED Projector Light Integrated DRL ring (White / Red) Important Notes This is an auxiliary lighting product, not a primary headlight Wiring harnesses, mounts, or switches may vary by installation Professional installation is recommended for proper alignment and wiring Usage and Application The HJG GodsEye 5-Lens LED Auxiliary Projector Light is intended to be used as a supporting light source alongside the vehicle’s primary headlamp. It is commonly installed on motorcycles to improve visibility during night riding, highway use, and low-light conditions where stock lighting may feel insufficient. As an auxiliary projector light, it can be positioned using crash guard mounts, fork mounts, or dedicated auxiliary light brackets depending on the motorcycle setup. Proper alignment is important to ensure effective road illumination without causing glare to oncoming traffic. This auxiliary projector light is suitable for riders who frequently ride after dark, travel long distances, or ride in conditions where additional forward lighting support improves confidence and visibility. It is not designed to replace the main headlight and should always be used as a complementary lighting solution. Electrical compatibility depends on the motorcycle’s wiring system. Installation may require a relay, switch, or compatible wiring harness depending on the setup used. Professional installation is recommended to ensure correct positioning, wiring safety, and optimal beam alignment. Maintenance and Usage Notes Regular inspection of auxiliary lighting alignment is recommended to ensure optimal road illumination and avoid glare to oncoming traffic. Keeping the lens surface clean helps maintain consistent light output over time. As with all electrical accessories, wiring connections should be checked periodically, especially after long rides or exposure to rain and dust.
Rs. 6,489.00
LCB Royal Enfield Himalayan fog light Mount is a purpose-built auxiliary light mounting solution. It provides a stable, vibration-resistant platform for fitting aftermarket fog or auxiliary lights on the Royal Enfield Himalayan. Designed for riders who demand reliability in tough riding conditions, this Royal Enfield Himalayan fog light mount keeps your auxiliary lights firmly positioned on highways, broken roads, and off-road terrain. The Royal Enfield Himalayan is often ridden in environments where lighting conditions change very rapidly. Early morning rides, foggy mountain roads, night highways, and unlit trails require reliable lighting. A securely mounted fog light setup plays a critical role in improving visibility and rider confidence. The LCB Fog Light Mount supports this need by offering a clean, secure mounting point without compromising the motorcycle’s structure or style. Purpose-Built for the Royal Enfield Himalayan This fog light mount is engineered to integrate seamlessly with the Royal Enfield Himalayan’s frame geometry. Its design carefully positions lights to maintain optimal beam alignment. It keeps the lights protected from road debris and limits excessive vibration. Whether touring long distances or exploring trails, this mount holds auxiliary lights steady on uneven terrain. Unlike universal clamps or improvised brackets, the model-specific mount ensures correct placement and consistent light alignment. This consistency helps maintain a predictable light spread and prevents frequent re-adjustments after rides. Material & Construction of Royal Enfield Himalayan fog light Mount The LCB Fog Light Mount is made from premium mild steel. This material balances strength, durability, and fatigue resistance under constant stress. Mild steel has excellent structural integrity, which is essential for accessories exposed to vibration and load on adventure motorcycles. The mount features a durable matte black powder-coated finish. This coating protects against corrosion, moisture, and surface wear. It also complements the Himalayan’s rugged design without drawing too much attention. The precision-cut design ensures clean edges, accurate mounting points, and consistent fitment, prioritizing strength without added bulk. This keeps installation both visually clean and functional. Stability & Vibration Control Auxiliary lights are only effective when they remain stable during rides. Excessive vibration can cause beam scatter and reduce visibility. It may also cause long-term damage to the lighting hardware. The LCB Fog Light Mount minimizes vibration transfer to help maintain consistent beam alignment during extended rides on rough surfaces. Stable mounting also reduces stress on the fog light housings and wiring. This contributes to better durability and longevity of the lighting setup, making it a reliable solution for rough terrain use. Compatibility & Installation The mount is compatible with most standard aftermarket fog lights used on motorcycles. This compatibility gives riders flexibility in choosing their preferred lights without brand or size restrictions. Installation is simple and uses direct-fit mounting points, avoiding unnecessary alterations to the motorcycle. This design suits riders who prefer clean, reversible installs without permanent bike modifications. It makes upgrading auxiliary lighting straightforward and hassle-free. Practical Benefits of Royal Enfield Himalayan fog light Mount for Daily and Touring Use For riders commuting daily or touring frequently, lighting is a key safety element—not just a luxury. Properly mounted fog lights improve visibility during fog, rain, or low-light conditions, enhancing overall safety. They also boost motorcycle visibility to other road users, reducing accident risks. The LCB Fog Light Mount supports these practical uses by providing a strong foundation for auxiliary lighting. It delivers consistent performance across varied riding conditions, whether on city streets or off-road tours. Key Features Custom-fit design for Royal Enfield Himalayan Heavy-duty mild steel construction for structural strength Matte black powder-coated finish for corrosion resistance Stable, vibration-resistant mounting platform Compatible with most aftermarket fog lights Clean, minimalist design that complements the motorcycle Direct-fit installation requiring no structural modification Warranty Information This product comes with a 6-month manufacturer warranty from Legundary Custom Builds protecting against manufacturing defects. RawTorque does not offer additional warranty beyond the manufacturer’s policy. For detailed warranty terms, please refer to our Warranty Policy page.
Rs. 1,099.00 Rs. 837.00
Performance meets precision. The Maddog Alpha Performance Auxiliary Lights set the benchmark for illumination in their class. Delivering a powerful 9600 lumens per pair at only 40W per light, these IP67-rated lights combine incredible brightness, refined beam focus, and efficient power consumption. Encased in a high-strength aluminum housing with a black gloss finish, the Alpha doesn’t just perform — it impresses. Designed to withstand heat, vibration, and harsh weather, it’s the perfect balance of power, style, and endurance for all types of rides and terrains. Whether mounted on motorcycles, 4x4s, or touring SUVs, the Alpha delivers clear visibility, long throw distance, and balanced spread, ensuring safety and performance during every drive. ⚙️ Key Features 9,600 lumens brightness per pair 40W efficient power draw per light IP67-rated for dust and water resistance Focused hybrid beam pattern for superior range and clarity Gloss black aluminum body — lightweight, corrosion-resistant Compatible with Maddog wiring harness kits and switches (sold separately) Universal mounting design — fits bikes, cars, and SUVs Exclusive 18-month manufacturer warranty 📦 Kit Contents Each Maddog Alpha kit includes everything you need for installation and setup. In the Box: ✅ A pair of Maddog Alpha Performance Lights ✅ A pair of basic stainless steel (SS) clamps ✅ Warranty card ✅ Screw kit ✅ Tail connectors ⚡ Compatibility Universal fitment — suitable for: Motorcycles (naked, touring, ADV, cruiser) SUVs and off-road vehicles Compatible with Maddog wiring harness, switch, and dimmer kits (sold separately) (Professional installation recommended for best results.) 🧠 Why Buy from RawTorque At RawTorque, every product we offer is genuine, performance-verified, and sourced from trusted manufacturers.Our mission is to bring engineered performance gear to enthusiasts who demand reliability and precision in every upgrade. When you buy from us, you’re investing in tested quality, authentic parts, and transparent warranty support. 🛡️ Warranty & Support This product is covered under an official Maddog manufacturer warranty, providing 18 months of replacement coverage from the date of purchase (as per the brand’s policy). RawTorque does not provide additional warranty, but our support team assists with warranty claims via Maddog’s authorized service network. For more details, please refer to our Warranty Policy.
Rs. 9,749.00 Rs. 9,689.00
KTM Adventure hazard module is a purpose-built, plug-and-play safety and visibility upgrade designed for KTM Adventure motorcycles 250 / 390. Developed to integrate smoothly with the electrical systems of these models, the KTM Adventure hazard module adds advanced hazard flashing features without altering the bike’s stock wiring or controls. Modern adventure motorcycles ride across various environments—busy city streets, highways, and difficult terrain. Visibility plays a vital role in keeping riders safe. This KTM Adventure hazard module delivers controlled, eye-catching hazard flash patterns, helping improve motorcycle visibility during emergencies, breakdowns, poor-visibility situations, or slow-speed conditions. Plug-and-Play Integration of KTM Adventure hazard module The module is engineered as a true plug-and-play module. Installation requires no splicing, wire cutting, soldering, or adding switches. It connects directly to the motorcycle’s existing indicator socket, preserving the factory wiring harness and OEM electrical integrity. This makes it perfect for riders wanting reversible or warranty-safe upgrades. Once installed, the KTM Adventure hazard module works with the stock indicator switches. There is no need for extra handlebar buttons or controls. It feels native to the bike, not an aftermarket attachment. Multiple Hazard Flash Patterns This module offers 60 onboard hazard flash patterns. Riders can select patterns that suit their environment or preference. Patterns range from standard flashes to dynamic sequences attracting attention when stopped or moving slowly. Switching between patterns provides flexibility for urban riding, touring, highway emergencies, or off-road group rides. All flashing modes are managed internally, requiring no programming tools or smartphone apps. Turn Signal Priority and Electrical Compatibility A key feature is turn signal priority logic. Regular indicator use is never compromised. When using turn signals, the module prioritizes them, ensuring legal and clear signaling. The module supports both LED and conventional bulb indicators, compatible with stock or aftermarket lights. It manages electrical load internally, ensuring stable operation across indicator types. Built for Adventure Conditions The KTM Adventure hazard module uses automotive-grade electronic components chosen for durability and reliability. Its housing is water-resistant and heat-resistant, ideal for rain, dust, heat, and vibration while riding. Adventure motorcycles face harsher environments than street bikes. This module is designed to operate reliably during daily commutes, long tours, or light off-road trips. OEM-Level Design and Warranty The module meets OEM standards for performance and electrical safety. It is backed by an official 3-year manufacturer warranty from Race Dynamics. This warranty reflects confidence in the module’s long-term durability and quality. RawTorque functions only as a reseller and does not provide extra warranty beyond the manufacturer’s coverage. Warranty claims follow Race Dynamics’ official policies. Model Compatibility The KTM Adventure hazard module is specifically designed for: KTM Adventure 250 KTM Adventure 390 Installation on other motorcycles is not advised unless explicitly approved by the manufacturer. Use Case Summary This KTM Adventure hazard module is perfect for riders seeking: Better visibility in emergencies or slow-moving scenarios A clean electrical upgrade with no invasive wiring Multiple flashing options without extra switches Reliable function across diverse riding environments An OEM-grade accessory with warranty coverage Important Notes Plug-and-play installation; no wiring changes needed Compatibility with LED and bulb indicators Manufacturer warranty applies; reseller warranty excluded Always obey local traffic laws on hazard light use
Rs. 2,269.00
FlashX is a smart hazard flash module developed specifically for Bajaj Dominar motorcycles. It enhances on-road visibility while preserving the motorcycle’s stock controls and wiring. Engineered as a true plug-and-play solution, FlashX connects directly to the existing indicator socket. This design eliminates the need for wire cutting, splicing, or any permanent electrical modifications. Riders can enjoy improved safety features without compromising factory wiring or voiding their warranty. Specifically designed for the Bajaj Dominar 250 and Dominar 400, FlashX integrates perfectly with the motorcycle’s original indicator system. Once installed, the module unlocks access to 60 onboard hazard flashing patterns. These diverse patterns allow riders to select the one that best suits riding conditions and personal style. The pattern selection process is handled entirely inside the module, requiring no external switches, remotes, or extra handlebar controls. This keeps the bike’s cockpit neat and preserves its original aesthetic. Bajaj Dominar Hazard Module: Purpose and Real-World Use Hazard flash modules are created to increase motorcycle visibility, especially when the bike is stationary or moving slowly. Use of FlashX is valuable during roadside stops, breakdowns, and emergency situations. It also proves helpful in severe weather conditions such as heavy rain or fog. By activating unique flashing patterns on the indicators, the motorcycle becomes more noticeable to other vehicles. This considerably reduces the risk of rear-end or side-impact accidents in traffic. Touring riders gain confidence from FlashX during long highway stops or unfamiliar road conditions. Urban commuters benefit in dense traffic or sudden slowdowns. Night riders also appreciate enhanced visual presence without installing additional lighting. This module adds a layer of safety without complicating the bike’s electrical setup. Electrical Compatibility and Integration of the Bajaj Dominar Hazard Module FlashX is built to work with both LED and bulb-type indicators. This compatibility ensures it caters to stock setups and aftermarket upgrades alike. The module communicates seamlessly with the Dominar’s original indicator switches and logic. Normal turn signal operation remains uninterrupted during standard riding, maintaining safe and expected signaling for nearby traffic. A key feature of the module is its auto-pause function for turn signal priority. When a turn indicator is active, this function pauses the hazard pattern to avoid signal overlap or confusion. The predictable signaling behavior is critical for rider safety and legal compliance on the road. Construction, Durability, and Reliability FlashX is manufactured using automotive-grade electronic components to ensure long service life. The module is both water-resistant and heat-resistant, which lets it function smoothly in rainy, humid, or hot conditions. These features match the demanding environments often faced by Indian riders. Its compact size allows discreet installation within the motorcycle’s wiring area, causing no interference with other parts. Durability is a top priority for this Bajaj Dominar hazard module. It withstands vibration, thermal cycling, and everyday riding stresses. Whether for daily commuting or long-distance touring, FlashX remains reliable and robust. Installation Experience of the Bajaj Dominar Hazard Module Thanks to its plug-and-play design, installing FlashX is simple and user-friendly. No special tools, electrical skills, or permanent changes are needed. Installation involves accessing the motorcycle’s indicator connector and plugging in the module. After securing it safely in the wiring area, the bike is ready to use with enhanced hazard flash functions. This non-invasive setup is perfect for riders who want reversible modifications. If needed, the module can be removed later, restoring the bike to its original configuration. This makes servicing or resale hassle-free and preserves the motorcycle’s factory condition. Warranty and Manufacturer Support for FlashX The FlashX module comes with a strong backing of a 3-year manufacturer warranty from Race Dynamics. This warranty reflects trust in the product’s electronic quality and durability. It covers manufacturing defects under normal usage conditions. It is important for customers to know that RawTorque does not offer additional or extended warranties beyond the official policy. They should refer to the manufacturer’s warranty terms for complete coverage details. Bajaj Dominar Hazard Module Summary In summary, FlashX is a dedicated hazard flash module crafted for Bajaj Dominar 250 and Dominar 400 motorcycles. It offers enhanced visibility and safety with intelligent flashing control. The module includes 60 diverse onboard flashing patterns and a true plug-and-play installation. It is compatible with both LED and bulb indicators and built with automotive-grade components for long-lasting performance. FlashX enhances safety without modifying the motorcycle’s original wiring or controls. It is designed to endure real-world riding conditions and is supported by a 3-year official warranty from Race Dynamics. FlashX is ideal for riders who value safety, simplicity, and clean integration on their Dominar bikes.
Rs. 2,269.00
FlashX is a smart, plug-and-play hazard flash module designed specifically for the Royal Enfield Meteor 350 motorcycles. It improves on-road visibility without changing the motorcycle’s factory wiring or controls. FlashX offers riders a clean, OEM-safe safety upgrade that integrates perfectly with the Meteor’s existing indicator system and enhances the Royal Enfield hazard light functionality. Purpose-Built for Royal Enfield Meteor with Advanced Hazard Control Many Royal Enfield Meteor riders seek functional safety upgrades that maintain reliability and the factory design. FlashX meets that exact demand by connecting directly to the motorcycle’s original indicator socket. It avoids cutting, splicing, or making permanent electrical changes. Once installed, FlashX works entirely through stock handlebar controls, preserving the original riding feel while offering enhanced hazard light control. Plug-and-Play Installation of a Hazard Light for Royal Enfield Motorcycles Installation is straightforward and non-invasive. FlashX is a true plug-and-play device, requiring no special tools or electrical skills. Riders simply connect the module to the Meteor’s indicator circuit and secure it in the wiring area. With no modifications to wiring, the module can be removed later without affecting the motorcycle’s original setup. This reversible installation suits riders who prefer clean upgrades, want to avoid warranty issues, or plan future bike changes. Intelligent Hazard Flash Control with Multiple Patterns Once installed, FlashX unlocks 60 onboard hazard flashing patterns. These patterns provide riders flexible options based on road and weather conditions. All patterns are embedded within the module, needing no external switches, remotes, or handlebar-mounted devices. This keeps the cockpit clutter-free and visually stock. The flashing patterns are invaluable during roadside stops, breakdowns, heavy traffic, rain, fog, or night riding. By showing a distinct sequence on the indicators, FlashX ensures the motorcycle stands out to surrounding traffic. This feature boosts safety and rider confidence significantly. Compatibility with LED and Bulb Indicators for Royal Enfield hazard light FlashX supports both LED and standard bulb-type indicators. It works efficiently with stock indicators and popular aftermarket upgrades. Riders do not need to change their existing indicator setup to use this module. An integrated auto-pause function for turn signals ensures normal indicator operation takes priority when a turn is signaled. This prevents confusion and maintains clear, predictable signaling on the road. Durable and Real-World Ready: A Royal Enfield hazard light Essential Developed by Race Dynamics, FlashX uses automotive-grade electronic components selected for long-lasting performance. Its water-resistant and heat-resistant design lets it operate reliably in rain, humidity, and high ambient temperatures common in Indian riding conditions. The compact module fits discreetly within the motorcycle’s wiring area without interfering with other parts. It is engineered to withstand vibration, temperature fluctuations, and daily riding stresses. This durability makes FlashX ideal for both city commutes and long-distance touring. Enhanced Safety Without Visual Clutter One important benefit of FlashX is improving safety without altering the motorcycle’s visual identity. No extra switches, modules, or accessories clutter the handlebar or bodywork. The Meteor maintains its factory look while gaining a functional safety upgrade that operates intuitively out of sight. Royal Enfield hazard light Warranty and Support FlashX comes with a 3-year manufacturer warranty from Race Dynamics, reflecting confidence in quality and reliability. This warranty covers manufacturing defects under normal use. RawTorque is an authorized seller but does not provide extended warranty coverage beyond the manufacturer’s terms. Customers should review official warranty details for coverage and exclusions. Summary of FlashX Features for Royal Enfield hazard light Upgrade FlashX is a dedicated hazard flash module for the Royal Enfield Meteor 350 motorcycles. It improves visibility and safety using intelligent flash control with 60 onboard patterns. The module supports plug-and-play installation, works flawlessly with LED and bulb indicators, and has an auto-pause feature for turn signal priority. Its robust, automotive-grade construction ensures durability in challenging riding conditions. FlashX offers a clean, OEM-safe upgrade for riders wanting improved hazard light functionality without compromise. This royal solution is perfect for enhancing your Meteor’s road presence and safety without additional bulk or complexity.
Rs. 2,269.00
FlashX is a plug-and-play smart hazard flash module developed specifically for the Royal Enfield Himalayan 450. Designed to enhance rider visibility without altering the motorcycle’s factory wiring or controls, this Royal Enfield hazard module provides a practical safety upgrade that integrates cleanly with the bike’s original electrical system. It is engineered for riders who want improved on-road presence and hazard visibility while keeping their motorcycle mechanically and electrically stock. Built by Race Dynamics, FlashX connects directly to the Himalayan 450’s existing indicator socket. Installation does not require wire cutting, splicing, soldering, or permanent electrical modification. Once installed, this hazard module operates through the motorcycle’s original indicator switch, preserving the factory handlebar layout and riding ergonomics. This makes FlashX suitable for riders who prefer non-invasive accessories or want to avoid complications during servicing, warranty claims, or resale. Purpose and Safety Application of Royal Enfield Hazard Module Hazard flash modules like FlashX improve motorcycle visibility during situations when a stationary or slow-moving motorcycle may not be easily noticed. This Royal Enfield hazard module is especially important during roadside stops, breakdowns, emergency situations, heavy traffic, poor weather such as rain or fog, night riding, or low-visibility environments. By activating coordinated flashing across the motorcycle’s indicators, FlashX increases visual awareness without adding auxiliary lights or external hardware. It is a functional safety accessory for touring riders, daily commuters, and frequent highway travelers. For adventure use, it also adds visibility during off-road halts or trail stops. Blink Pattern Control and Operation FlashX offers 60 onboard hazard flashing patterns, giving riders flexibility to choose a flash style that fits their riding environment and preference. These patterns focus on visibility and recognition, not decorative lighting. The variations include different flash speeds and sequences meant to attract attention without distraction. Pattern selection is handled internally by the module. No external remotes, extra switches, or mobile applications are required. This keeps the cockpit simple and avoids adding controls to the handlebar. Once chosen, the pattern operates consistently through the motorcycle’s standard indicator controls. An integrated auto-pause function ensures that when a turn indicator is activated, normal signaling takes priority. This maintains predictable road communication and prevents confusion for other road users, which is critical for safety and compliance. Electrical Compatibility and Integration FlashX is compatible with both LED and halogen indicators, allowing it to work with stock indicator setups and popular aftermarket upgrades. It integrates directly with the Himalayan 450’s existing indicator circuitry and preserves standard turn-signal functionality. Because FlashX is plug-and-play, it can be removed if needed, restoring the motorcycle to its original electrical setup without damage to the wiring harness. This reversible installation suits riders who prefer temporary modifications or want future upgrade flexibility. Build Quality and Durability The module is built using automotive-grade electronic components in a compact, sealed enclosure. It is made to withstand vibration, heat, and environmental exposure encountered during daily riding and long-distance touring. FlashX is water-resistant and heat-resistant, adapted for rain, humidity, and variable temperatures typical of Indian riding. Its compact size allows discreet placement within the motorcycle’s existing wiring without interfering with other components or limiting access during maintenance. Durability is critical for electronic accessories. FlashX is designed for reliable operation under continuous use, frequent activation, and varying conditions. Installation Experience Installing FlashX is straightforward and requires no special tools or technical expertise. Riders access the Himalayan 450’s indicator connector, plug in the unit, and secure it safely within the wiring area. Clear access and a non-invasive connection make the process quick and reversible. With no permanent changes, FlashX suits those wanting a clean upgrade that preserves factory wiring integrity and electrical reliability. Warranty and Manufacturer Support FlashX is backed by a 3-year manufacturer warranty from Race Dynamics, covering defects under normal use. This shows confidence in the product’s reliability and build quality. RawTorque acts only as an authorized seller and does not provide extended warranty beyond the manufacturer’s policy. Customers should consult official warranty terms for details. Summary of Royal Enfield Hazard Module Benefits FlashX for the Royal Enfield Himalayan 450 is a purpose-built hazard flash module designed to improve rider visibility without compromising factory wiring or controls. With 60 onboard flashing patterns, plug-and-play installation, compatibility with LED and halogen indicators, durable automotive-grade construction, and a 3-year manufacturer warranty, this Royal Enfield hazard module offers a practical safety upgrade for real-world riding. It is an ideal solution for riders who value clean integration, reliability, and enhanced on-road presence.
Rs. 2,559.00
FlashX is a smart hazard flash module engineered specifically for the Triumph hazard flash 400 platform, including the Speed 400 and Scrambler 400X. Developed by Race Dynamics, FlashX enhances on-road visibility and rider safety without changing the motorcycle’s factory wiring or controls. This is a true plug-and-play solution that integrates directly with stock indicators, preserving OEM quality while adding advanced hazard flash capability. Modern motorcycles rely on visibility for safety, especially in unpredictable traffic. FlashX meets this need by enabling controlled hazard flashing through existing indicators. It makes motorcycles more noticeable during roadside stops, emergencies, slow traffic, or low-visibility conditions like rain, fog, or night riding. By using the motorcycle’s own indicators, FlashX avoids additional lights or external switches that clutter the handlebar area. Designed specifically for Triumph Speed 400 and Scrambler 400X motorcycles, FlashX connects directly to the bike’s indicator socket. Installation requires no wire cutting, splicing, soldering, or permanent electrical modification. This non-invasive method keeps factory wiring, electronics, and warranty intact. Riders who want reversible and clean changes appreciate this simple, safe installation technique. Once installed, FlashX provides access to 60 onboard hazard flash patterns. These patterns include options suitable for diverse riding environments: quick flashes for emergencies, slow patterns for roadside safety, and patrol-style sequences used in high-visibility signaling. Pattern selection is internal, controlled by the motorcycle’s switch logic. No remotes, buttons, or extra controls are needed, keeping the cockpit uncluttered and OEM in look. FlashX works fully with both LED and halogen indicators, making it fit motorcycles using stock or common aftermarket upgrades. It prioritizes normal turn-signal operation via an auto-pause function, ensuring signaling stays predictable and compliant during lane changes or turns. Built with automotive-grade electronic components, FlashX is meant to endure real riding conditions. The module features a water- and heat-resistant housing, enabling use in rain, humidity, and high heat. Its compact design allows discreet mounting in the motorcycle’s wiring space, avoiding interference. FlashX suits many riding scenarios. Urban commuters gain improved visibility in traffic slowdowns. Touring riders benefit during highway stops or breakdowns. Scrambler 400X riders in mixed terrain or remote zones add a visual safety layer without bulky gear. FlashX offers functional safety without changing the Triumph hazard flash 400’s clean design style. This product carries a 3-year manufacturer warranty from Race Dynamics. It shows confidence in build quality and electronic life. RawTorque only sells this authorized product and does not provide extra warranty beyond the manufacturer. Customers should check the official warranty terms carefully. In summary, FlashX is a hazard flash module purpose-built for Triumph hazard flash Speed 400 and Scrambler 400X motorcycles. With true plug-and-play installation, 60 onboard flash patterns, LED and halogen compatibility, durable automotive-grade construction, and OEM-safe integration, it offers a real-world safety upgrade designed for riding conditions. Additional Usage, Compliance, and Fitment Notes for Triumph hazard flash FlashX operates within the electrical system of Triumph’s 400 platform without disrupting standard lighting functions. The motorcycle’s turn indicators work as the manufacturer intended during normal riding. Hazard flashing activates only when needed, ensuring daily signals remain predictable for other drivers. Because FlashX works via the existing indicator circuit, it does not increase electrical load beyond safe limits. This allows long use without overheating or stressing the electrical system. The module’s logic maintains consistent flashing even during voltage changes common while idling, stop-and-go traffic, or highway riding. FlashX is intended strictly as a visibility and safety enhancement. It does not change headlamp, brake light, or other lighting functions on the motorcycle. Riders must comply with traffic laws and use hazard flashing responsibly, following local safety rules. The compact FlashX design allows discreet installation inside the wiring area, keeping access open for servicing. Its reversible mount suits riders who want to return the motorcycle to stock for resale or inspection. Installation requires switch-off ignition. Riders should securely mount FlashX to prevent vibration movement. Periodic maintenance checks ensure connectors are firm. FlashX is made and quality-checked by Race Dynamics and distributed by authorized dealers. Specifications and compatibility rely on manufacturer data and may change without notice.
Rs. 2,269.00
FlashX is a smart hazard flash module developed exclusively for the Royal Enfield Guerrilla 450. This device is designed to improve motorcycle visibility while preserving factory wiring integrity and maintaining OEM functionality. Engineered by Race Dynamics, FlashX offers a clean, plug-and-play solution for riders seeking enhanced on-road safety without invasive electrical changes. Unlike traditional hazard light systems that require wire cutting, extra switches, or aftermarket relays, FlashX connects directly to the Guerrilla 450’s existing indicator socket. Installation involves no splicing, soldering, or permanent modifications to the motorcycle’s electrical system. This ensures compatibility with stock wiring and preserves manufacturer warranty integrity, making it ideal for riders focused on maintaining their bike’s original condition. Purpose & Safety Application of Royal Enfield hazard light Hazard flash modules are essential for making a stationary or slow-moving motorcycle more visible to other road users. FlashX is particularly useful in many real-world riding scenarios such as roadside stops, mechanical breakdowns, sudden traffic slowdowns, poor weather, fog, low-light environments, or emergencies on highways. Activating a distinct flashing pattern simultaneously across all indicators, FlashX improves conspicuity and lowers the risk of being overlooked by traffic. For touring riders, FlashX adds an extra layer of safety during long-distance journeys and highway halts. Urban riders benefit from increased visibility in dense traffic zones, while night riders gain a clearer visual presence without needing additional auxiliary lighting. This module serves as an essential safety tool under diverse riding conditions, making the Royal Enfield hazard light an important accessory for every rider. Functional Design & Blink Patterns FlashX is equipped with 60 onboard hazard flashing patterns. Riders can choose patterns suited for different environments or visibility needs. These patterns include fast and slow sequences to many attention-grabbing flashlight modes, all designed to maximize recognition without external controllers. All the flashing logic runs internally within the FlashX module. The unit features no external switches, remotes, or handlebar-mounted controls and keeps the bike’s cockpit clean. This design preserves the factory layout of the Royal Enfield Guerrilla 450 while enhancing the hazard functionality with advanced led technology. Electrical Compatibility & Integration for Royal Enfield hazard light The FlashX module supports both LED and halogen indicator setups. This makes it compatible with factory stock indicators and many popular aftermarket upgrades. The module integrates perfectly with existing indicator switches, so normal turn signal operations remain fully functional and unchanged. An integrated auto-pause function prioritizes normal turn signal use when indicators are activated. This prevents confusion during lane changes or turns and improves overall safety on the road. The smart design allows seamless operation of your Royal Enfield hazard light system. Construction & Durability of FlashX Royal Enfield hazard light FlashX uses automotive-grade electronic components to ensure consistent and reliable performance under real-world riding conditions. The housing is water-resistant and heat-resistant, suitable for rides in rain, humidity, and varying temperature conditions. Its compact form factor allows discreet installation within the motorcycle’s wiring area without interference. The module is engineered to handle vibration, temperature changes, and regular riding stresses, making it a durable addition to your royal motorcycle. Installation Experience of FlashX Royal Enfield Hazard Light Installing FlashX is simple and fully reversible. Riders only need to access the motorcycle’s indicator connector, plug in the module, and secure it safely within the wiring area. No specialized tools or electrical knowledge are required. Since no permanent modifications are involved, the module can be removed anytime, restoring the original setup. Warranty & Manufacturer Support FlashX comes with a 3-year manufacturer warranty from Race Dynamics. This warranty covers manufacturing defects under standard usage and reflects confidence in the product’s build quality and reliability. RawTorque does not provide additional warranties beyond the manufacturer’s policy. Customers should review warranty terms carefully before purchase to understand coverage and exclusions. Compatibility Motorcycle: Royal Enfield Guerrilla 450 Indicator Type: Compatible with both LED and halogen indicators Installation: Plug & Play with no wire cutting required Summary of Royal Enfield hazard light Module FlashX is a purpose-built hazard flash module for the Royal Enfield Guerrilla 450. It significantly improves safety and visibility through smart flashing control. With 60 onboard patterns, seamless OEM-style integration, automotive-grade durability, and hassle-free plug-and-play installation, FlashX is a valuable safety upgrade. It maintains the factory wiring and aesthetics while fulfilling real-world riding demands. The module includes a 3-year manufacturer warranty, making it a practical and reliable royal motorcycle accessory combining led technology and advanced flashlight functions.
Rs. 2,559.00
The Race Dynamics FlashX Hazard Flash Module is a plug-and-play electrical accessory designed specifically to enhance hazard light functionality on the Suzuki V-Strom SX 250. It integrates directly with the motorcycle’s existing indicator wiring and stock switchgear, allowing expanded hazard light behaviour without modifying the factory electrical system. FlashX is intended for riders who want improved on-road visibility and configurable hazard flashing patterns while retaining the motorcycle’s original controls and wiring integrity. Purpose & Function FlashX operates as an inline hazard flasher module that controls how the left and right indicators flash when hazards are activated. Instead of a fixed factory flash pattern, the module introduces multiple pre-programmed flashing sequences that can be selected by the rider. The unit connects directly to the stock turn signal harness of the Suzuki V-Strom SX 250 and works entirely through the existing indicator switch. No additional buttons, switches, or handlebar controls are required. This design ensures: Original ergonomics remain unchanged No permanent electrical modification Full reversibility if the module is removed Flash Patterns & Operation The FlashX module contains 60 onboard flashing patterns stored within its internal controller. These patterns vary in rhythm and timing, allowing riders to choose a flashing behaviour that suits different riding or visibility conditions. Pattern categories include: Steady flashing patterns Quick flash sequences Slow flash sequences Patrol-style alternating patterns Pattern selection is performed using the left–right–centre toggle action of the stock indicator switch. Riders cycle through patterns by following a simple input sequence, eliminating the need for external controllers or mobile apps. Indicator Compatibility FlashX is compatible with both: LED indicators Halogen / bulb-type indicators The module is designed to work with the indicator loads commonly used on the Suzuki V-Strom SX 250. It manages flash sequencing to maintain stable operation and avoids irregular behaviour such as rapid or hyper-flashing that can occur with some aftermarket lighting setups. This makes FlashX suitable for motorcycles running: Stock indicators LED indicator upgrades Visual Feedback During Setup The module includes on-board LED feedback indicators. These LEDs provide visual confirmation during: Initial setup Pattern selection Mode switching This feedback helps riders identify the currently selected flash pattern without guesswork, especially during installation or adjustment. Installation & Electrical Safety FlashX is supplied with a plug-and-play wiring harness that mates directly with the V-Strom SX 250’s stock indicator connector. Installation characteristics: No wire cutting or splicing No soldering or crimping required No additional switches added Because the factory wiring loom is not altered, electrical integrity is preserved. The module can be installed or removed without leaving permanent changes to the motorcycle. Physical Design & Environmental Resistance The FlashX unit is housed in a compact, slim-profile enclosure, allowing it to fit within limited spaces under body panels or behind fairings without interfering with other components. The enclosure is engineered to be water-resistant, offering protection against: Rain Road spray Typical outdoor riding conditions While not specified as submersible, the design is intended for real-world touring and everyday riding environments. Warranty & Manufacturer Support Race Dynamics provides a 3-year hassle-free replacement warranty for the FlashX Hazard Flash Module. This warranty is issued and honoured by the manufacturer. RawTorque, as an authorised reseller, does not extend or modify manufacturer warranty terms. Customers are advised to refer to Race Dynamics’ official warranty documentation for full coverage details. Product Classification Race Dynamics categorises FlashX under its “Essentials” product line, focusing on functional safety, reliability, and ease of integration. The module is designed to offer expanded hazard lighting behaviour without altering the motorcycle’s stock electronics or user interface. Compatibility Motorcycle compatibility Suzuki V-Strom SX 250 No additional models should be assumed unless explicitly stated by the manufacturer. Summary for Buyers FlashX is suited for riders who want: Plug-and-play hazard flash enhancement Multiple selectable flashing patterns Compatibility with LED or bulb indicators No wiring modification or added switches Manufacturer-backed warranty support
Rs. 2,269.00
The Race Dynamics FlashX Hazard Flash Module is a plug-and-play electrical accessory designed to enhance the hazard and turn signal behaviour of Royal Enfield Himalayan motorcycles. It integrates directly with the motorcycle’s existing indicator wiring and stock switchgear, allowing riders to access multiple hazard flash patterns without modifying the factory electrical system. FlashX is intended for Himalayan owners who want improved visibility and configurable hazard signalling while keeping the motorcycle’s original wiring, controls, and ergonomics intact. What FlashX Does FlashX functions as an inline hazard flasher module that controls how the left and right indicators behave when hazard mode is activated. Unlike the factory flasher, which offers a fixed blinking pattern, FlashX introduces a range of selectable flash sequences stored within the module itself. Once installed, riders can cycle through different hazard patterns using the existing indicator switch. There are no additional switches, remotes, or external controllers involved. This approach ensures: No changes to handlebar layout No added electrical complexity Full reversibility if the module is removed Flash Patterns & User Control The FlashX module comes with 60 onboard blinking patterns, pre-programmed into its internal controller. These patterns vary in rhythm and timing, giving riders the ability to select a flashing behaviour that suits different riding conditions or personal preferences. The available patterns include: Steady flash sequences Quick flash modes Slow flash modes Patrol-style alternating patterns Pattern selection is carried out using a defined sequence of left, right, and centre toggle inputs on the stock indicator switch. This allows pattern changes without stopping the motorcycle or accessing hidden buttons. Auto Pause Feature FlashX includes an Auto Pause function that temporarily pauses hazard flashing when a turn indicator is activated. Once the turn is completed, hazard mode resumes automatically. This behaviour allows the rider to indicate lane changes or turns clearly without manually disabling hazard lights, improving signal clarity during real-world riding scenarios. Indicator Compatibility FlashX is compatible with both: LED indicators Halogen / bulb-type indicators The module is designed to operate with indicator loads commonly used on Royal Enfield Himalayan models. It maintains consistent flashing behaviour and avoids irregular output that can occur with incompatible flasher units. This makes FlashX suitable for motorcycles running: Stock indicators Aftermarket LED indicators Installation & Electrical Safety Installation is fully plug-and-play. FlashX connects directly to the Himalayan’s OEM indicator connector. Installation characteristics: No wire cutting or splicing No soldering or crimping No additional switches required Because the original wiring loom is untouched, the electrical integrity of the motorcycle is preserved. The module can be installed or removed without leaving permanent modifications. Physical Design & Durability FlashX is housed in a compact, slim-profile enclosure, allowing it to fit within limited under-seat or side-panel spaces on the Himalayan. Its size and shape ensure it does not interfere with surrounding components. The enclosure is engineered to be water and heat resistant, making it suitable for typical Indian riding conditions, including rain, dust, and temperature variation encountered during touring and daily use. Manufacturer Warranty Race Dynamics provides a 3-year hassle-free replacement warranty for the FlashX Hazard Flash Module. Warranty coverage is issued and governed by the manufacturer. RawTorque sells only genuine FlashX units sourced from authorised distributors and does not extend or modify manufacturer warranty terms. Customers are advised to refer to Race Dynamics’ warranty policy for full details. Confirmed Compatibility Supported models: Royal Enfield Himalayan BS3 Royal Enfield Himalayan BS4 Royal Enfield Himalayan BS6 No other models should be assumed unless explicitly confirmed by the manufacturer. Summary for Buyers FlashX is suitable for Himalayan riders who want: Plug-and-play hazard flash enhancement Multiple selectable flash patterns Auto Pause functionality LED and halogen indicator compatibility No wiring modification Manufacturer-backed warranty support
Rs. 2,269.00
Overview:FlashX is a plug-and-play hazard flash module engineered for Royal Enfield motorcycles. With 60 onboard blink patterns, it enhances your bike’s visibility and gives you full control using your existing indicator switch — no extra buttons or wiring cuts required. Features: 🔌 Plug & Play design — direct fit for Royal Enfield’s OEM indicator socket. ⚡ 60 built-in blink patterns for hazard and signal customization. 💧 Water-resistant and built for long-term durability. 🏍️ Compatible with LED or halogen indicators. 🧠 Auto-pause function during signal use for safety. ⚙️ Compact, lightweight module with minimal power draw. Fitment Compatibility: Interceptor 650 Continental GT 650 Super Meteor 650 Shotgun 650 Warranty & Authenticity:This product carries manufacturer warranty as per Race Dynamics’ terms.RawTorque only retails 100% genuine FlashX modules sourced directly from authorized distributors.(Note: RawTorque does not provide additional or extended warranties beyond manufacturer coverage. Please refer to our Warranty Policy for full details.)
Rs. 2,269.00
All-in-One Auxiliary Light Controller | IP67 | 12V Plug & Play Complete Lighting Control in One Integrated System The Maddog Switch Pro with Integrated Wire Harness Pro is engineered as a consolidated control and power delivery solution for auxiliary lighting systems. Designed for riders who want structured installation, minimal cockpit clutter, and advanced lighting functionality, this all-in-one unit combines the Switch Pro controller with the Wire Harness Pro into a single integrated system. By eliminating separate wiring components and external switch units, the system simplifies installation while maintaining electrical stability and performance consistency. It is purpose-built for riders who rely on auxiliary lighting during touring, off-road riding, and night highway travel. This is Maddog’s consolidated lighting control architecture — designed for reliability and clean integration. All-in-One Integrated Design Unlike modular setups that require separate harnesses and switches, this system integrates both components into a unified assembly. Integration benefits include: Reduced wiring clutterSimplified installation routingCompact handlebar layoutCleaner electrical architecture This reduces potential connection points and enhances installation consistency. The unit is designed exclusively to function with the included Wire Harness Pro. Plug-and-Play Installation The Switch Pro system is engineered for direct plug-and-play installation. Installation features include: No wire cuttingNo splicingPre-configured connectorsDedicated harness integration This minimizes installation errors and ensures correct electrical alignment. Professional installation is recommended for proper mounting, fuse protection, and safe routing. On/Off Control with Tactile Feedback The Switch Pro features intuitive tactile feedback designed for glove-friendly operation. Switch control provides: Primary on/off activationImmediate responseClear button feedbackMinimal input delay The red illumination ring enhances visibility during low-light conditions without excessive glare. Integrated Pass Function The system includes a Pass function designed for temporary light activation. Pass mode enables: Instant flash of auxiliary lightsImproved signaling for overtakingEnhanced momentary visibility This function provides additional control during highway riding scenarios. Beacon Mode Functionality The Beacon mode activates a controlled flashing pattern. Beacon functionality supports: Emergency signalingTemporary visibility alertsLow-visibility riding conditions Use of beacon or strobe patterns should comply with local traffic regulations. Weather-Resistant Construction (IP67) The Maddog Switch Pro system is IP67 certified. IP67 rating indicates: Protection against dust ingressResistance to water exposure under defined conditions Construction materials include: High-grade polycarbonate housingSealed silicone componentsWeather-resistant connectors Designed for use in: Rain ridingAdventure terrainDust-heavy environmentsLong-distance touring Proper installation ensures long-term durability. 12V Electrical System Compatibility The Switch Pro operates on standard 12V DC motorcycle electrical systems. It is designed exclusively to work with: Included Maddog Wire Harness Pro Not Compatible With: Older Maddog harness systemsMaddog Dual Wire Harness ProMaddog DimmerOther aftermarket harness systems Compatibility should be verified prior to installation. Compact Cockpit Integration The integrated design reduces visible wiring and simplifies handlebar layout. Mounting benefits include: Compact footprintMirror clamp compatibilityHandlebar clamp compatibilityBalanced aesthetic alignment The matte-black finish and red illumination ring provide a modern, cohesive appearance. Ideal Applications Touring motorcyclesAdventure motorcyclesOff-road lighting systemsHighway night riding setupsDual auxiliary light configurations The Switch Pro is intended for riders seeking an integrated, premium auxiliary lighting control system. Kit Contents 1 × Maddog Switch Pro1 × Integrated Wire Harness Pro1 × Handlebar Clamp2 × Mirror Mounting Clamps1 × Warranty Card1 × Screw Set4 × Silicone Belts Supplied as a complete integrated system. Technical Specifications Brand: MaddogModel: Switch Pro with Wire Harness ProFunctions: On/Off Control, Pass Function, Beacon ModeMaterial: High-Grade Polycarbonate + Sealed SiliconeWater Resistance: IP67 CertifiedOperating Voltage: 12V DCInstallation: Plug & Play (No Cutting Required) Important Notes Compatible only with included Wire Harness Pro.Not compatible with older Maddog harnesses or aftermarket systems.Professional installation recommended.Beacon mode usage should comply with local regulations.Ensure total auxiliary light load is within harness capacity. Summary The Maddog Switch Pro with Integrated Wire Harness Pro delivers consolidated auxiliary lighting control in a compact, IP67-rated system. With integrated power delivery, Pass functionality, Beacon mode, and plug-and-play architecture, it simplifies installation while maintaining electrical stability and durability. Integrated control. Reduced clutter. Built for reliable auxiliary lighting performance.
Rs. 2,989.00
4-Level Brightness Control | Pass Mode | Beacon Mode | 12V Plug & Play Precision Light Control for Serious Auxiliary Setups The Maddog Dimmer is engineered for riders who require adjustable auxiliary lighting output without compromising electrical stability or installation simplicity. Designed as a complete control solution, this unit allows real-time brightness adjustment across four output levels while integrating advanced signaling functions such as Pass and Beacon modes. Unlike basic on/off switch systems, the Maddog Dimmer enables dynamic light intensity control based on riding conditions. Whether navigating dense fog, urban traffic, or open highways at night, this controller allows riders to fine-tune output for visibility and road awareness. This is a dedicated lighting control system — not just a toggle switch. Quad-Level Dimming Control The Maddog Dimmer allows adjustment of auxiliary light output across four predefined levels: 100% – Maximum illumination75% – High-output cruising mode50% – Balanced mid-range output25% – Low-intensity urban or low-visibility mode This multi-level configuration allows riders to: Reduce glare in city environmentsImprove fog penetration in adverse weatherAdjust brightness to match traffic conditionsExtend auxiliary light lifespan through controlled usage Brightness levels are electronically regulated to maintain stable current flow. Integrated Pass Function The Dimmer includes an integrated Pass functionality. Pass mode allows: Instant temporary full-brightness flashImproved overtaking visibilityQuick signaling to surrounding traffic This function enhances communication on highways and during overtaking scenarios without requiring separate switches. Beacon Mode for Visibility Signaling The Beacon Mode activates a controlled flashing light pattern. Beacon functionality is designed for: Emergency signalingLow-visibility situationsTemporary roadside alerts Usage of flashing patterns should comply with local traffic regulations. All-In-One Control System The Maddog Dimmer comes with its own dedicated wire harness. Key advantages: No additional Maddog Switch requiredNo Wire Harness Pro neededIntegrated plug-and-play architecturePre-configured connectors for simplified installation This eliminates compatibility confusion and reduces the need for separate control units. The Dimmer is designed to operate exclusively with the included harness. Plug-and-Play Installation Installation is engineered for direct connectivity. Installation benefits include: No wire cuttingNo splicingPre-configured connectorsDedicated harness compatibility Professional installation is recommended to ensure proper routing, secure mounting, and correct load management. Weather-Resistant Construction The Dimmer housing and connectors are constructed using high-grade polycarbonate and weather-sealed components. Durability features include: Moisture resistanceDust resistanceVibration toleranceSecure connector sealing Designed for use across: Rain ridingOff-road terrainHigh-humidity conditionsExtended touring environments The system operates on standard 12V DC motorcycle electrical platforms. Compact & Handlebar-Friendly Design The Dimmer is engineered for minimal cockpit intrusion. Mounting benefits: Compact footprintErgonomic handlebar positioningMirror mount compatibilityClean OEM-style integration It integrates without interfering with throttle or braking controls. Compatibility Compatible Only With: Included Dedicated Maddog Dimmer Wire Harness Not Compatible With: Maddog Wire HarnessMaddog Wire Harness ProMaddog Dual Wire Harness ProMaddog SwitchMaddog Dual Switch Pro Compatibility should be verified before purchase. Ideal Applications Fog light intensity controlAdventure touring setupsHighway auxiliary lightingUrban brightness managementEmergency signaling support The Dimmer is suited for riders who require adaptive auxiliary lighting performance rather than fixed-output systems. Kit Contents 1 × Maddog Dimmer Unit1 × Dedicated Dimmer Wire Harness1 × Warranty Card1 × Screw Kit2 × Tail Connectors1 × Handlebar Clamp2 × Mirror Mounts Supplied as a complete dimmer control system. Technical Specifications Brand: MaddogModel: Maddog DimmerBrightness Levels: 100%, 75%, 50%, 25%Functions: Pass Mode, Beacon ModeMaterial: High-Grade PolycarbonateConnectors: Weather-SealedVoltage: 12V DCInstallation: Plug & Play (Dedicated Harness Included) Important Notes Compatible only with the included dedicated harness.Not compatible with other Maddog harness systems.Ensure total auxiliary light load remains within safe limits.Professional installation recommended.Beacon mode usage should comply with local regulations. Summary The Maddog Dimmer delivers structured brightness control, Pass flash capability, and Beacon signaling in a compact plug-and-play unit with its own dedicated harness. Designed for riders who demand adaptive auxiliary lighting performance, it provides controlled output across four intensity levels without requiring additional switches. Adjustable output. Integrated signaling. Complete lighting control system.
Rs. 3,989.00
Dual-Channel Auxiliary Light Controller | 12V Plug & Play | Backlit Independent Control for Dual Auxiliary Lighting Systems The Maddog Dual Switch Pro is engineered for riders who require structured, independent control over two auxiliary lighting circuits. Designed as a dual-channel, plug-and-play switch system, it allows precise operation of two separate pairs of auxiliary or ancillary lights from a compact handlebar-mounted unit. Built for rugged motorcycle use, the Dual Switch Pro combines weather-sealed construction, tactile feedback switches, and illuminated backlit buttons to ensure reliable operation in varied riding conditions. This is a control solution designed for organized auxiliary setups — not a generic aftermarket toggle. Dual-Channel Independent Operation The Dual Switch Pro provides separate control for two auxiliary lighting circuits. This configuration allows: Independent activation of fog lights and spotlightsSeparate control for high-output and low-output auxiliary systemsOrganized lighting management during night or adverse weather ridingStructured electrical control without cross-circuit interference Each switch operates independently, offering flexible control without needing additional wiring modifications. Ensure total lighting load remains within the rating of the connected harness system. Plug-and-Play Integration The Dual Switch Pro is designed for plug-and-play compatibility with Maddog wiring systems. Installation advantages include: No cutting requiredNo splicing requiredPre-configured connectorsDirect integration with compatible harness systems This reduces installation complexity while maintaining electrical integrity. Professional installation is recommended to ensure proper routing and secure mounting. Backlit Red Illumination Each switch features red backlit illumination for visibility in low-light conditions. Backlighting supports: Quick identification during night ridingVisual confirmation of activation statusReduced distraction while maintaining clarity The illumination is designed to complement auxiliary lighting setups without excessive glare. Operates on 12V DC systems. Compact Handlebar Integration The Dual Switch Pro is engineered for clean handlebar placement. Compact design benefits include: Minimal cockpit clutterBalanced positioning near existing controlsImproved ergonomicsOEM-like appearance The housing is shaped to integrate neatly without interfering with throttle, brake, or clutch operation. Weather-Sealed Construction The switch housing is manufactured using high-durability plastic with weather-sealed protection. Construction features: Resistance to vibrationProtection against dustSealed housing for moisture resistanceLong-term reliability under varied terrain conditions This supports consistent operation during: Rain ridingOff-road vibration exposureHigh-humidity environments Proper mounting and connector sealing are essential to maintain performance. Tactile Feedback & Response The Dual Switch Pro offers crisp tactile feedback during activation. Tactile advantages include: Clear on/off confirmationReduced accidental activationControlled switching feelReliable response under gloves Minimal input lag ensures immediate circuit activation when required. Universal 12V Compatibility (Harness-Based) The Dual Switch Pro is compatible with motorcycles using Maddog auxiliary harness systems. Compatible With: Maddog Wire HarnessMaddog Wire Harness ProMaddog Dual Wire Harness Pro Not Compatible With: Maddog DimmerMaddog Switch Pro with Integrated Harness Compatibility verification is recommended before purchase. Designed for 12V DC motorcycle systems only. Ideal Applications Dual fog light setupsFog + spotlight combinationsAdventure auxiliary lightingTouring motorcycle lighting systems This switch is suited for riders who manage multiple auxiliary light pairs and require organized control. Kit Contents 1 × Maddog Dual Switch Pro1 × Handlebar Clamp2 × Mirror Mounts1 × Warranty Card1 × Screw Kit2 × Tail Connectors Supplied as a complete installation-ready control unit. Technical Specifications Brand: MaddogModel: Dual Switch ProFunction: Independent Control for 2 Auxiliary Light PairsLighting: Red Backlit IlluminationMaterial: High-Durability Weather-Sealed PlasticVoltage: 12V DCInstallation: Plug & PlayFitment: Universal (for motorcycles using Maddog harness setup) Important Notes Ensure compatibility with existing harness system before purchase.Not compatible with Maddog Dimmer or Switch Pro with Integrated Harness.Professional installation recommended for secure routing and mounting.Confirm correct placement to avoid interference with riding controls. Summary The Maddog Dual Switch Pro delivers structured dual-channel auxiliary lighting control in a compact, weather-sealed, plug-and-play unit. Designed for riders running two independent lighting circuits, it offers reliable switching, red backlit visibility, and seamless integration with Maddog harness systems. Independent control. Clean installation. Built for organized lighting setups.
Rs. 2,489.00
Single-Channel | Plug & Play | 12V DC | Universal Fit Clean Control for Auxiliary Lighting Systems The Maddog Switch is a compact, single-channel auxiliary light control unit engineered to simplify motorcycle electrical setups. Designed for riders who prefer a clean cockpit layout and straightforward functionality, this plug-and-play switch provides reliable on/off control for auxiliary lights and compatible electrical accessories. Built with durability in mind, the switch integrates seamlessly with Maddog wiring systems and most standard 12V auxiliary harness setups. Whether mounted on the mirror stem or handlebar, it maintains easy accessibility without adding visual clutter. This is a functional control unit built for practical, long-term use. Single-Channel Auxiliary Control The Maddog Switch operates as a single-channel control system designed for one auxiliary circuit. This configuration supports: On/off control of auxiliary lightsControl of horns or ancillary electrical accessoriesStable switching without electrical interferenceDirect integration with compatible wire harness systems It is intended for use with auxiliary lighting circuits rather than primary motorcycle electrical systems. Always ensure total electrical load is within system capacity. Backlit Power Button The switch features a red backlit power button for enhanced visibility. Backlighting supports: Clear identification during night ridingImproved control access in low-light conditionsVisual confirmation of activation status The illumination is designed to be visible without being distracting. Backlight operates on 12V DC systems. Plug-and-Play Installation The Maddog Switch is designed for straightforward plug-and-play installation. Installation benefits include: No wire cutting requiredNo splicing requiredDirect connector compatibilityReduced installation complexity When used with Maddog wire harness systems, installation is simplified and reversible. Professional installation is recommended to ensure proper routing and electrical safety. Dual Mounting Options The switch includes two mounting configurations for flexible placement. Mounting options include: Mirror stem clampHandlebar clamp This allows riders to position the switch based on cockpit layout and ergonomic preference. Correct placement ensures easy access without interfering with throttle or brake controls. Durable Construction The Maddog Switch is built using high-grade ABS plastic housing combined with metal mounting components. Material benefits include: Resistance to vibrationDurability under off-road conditionsProtection against dust and moisture exposureStructural stability under repeated use The compact form factor reduces exposure while maintaining accessibility. Universal 12V Compatibility The switch operates on standard 12V DC motorcycle electrical systems. Compatible with: Maddog Wire HarnessMaddog Wire Harness ProMost standard auxiliary light wiring systems Not Compatible With: Maddog Switch ProMaddog Dimmer units Compatibility verification is recommended before installation. OEM-Integrated Aesthetic The switch is designed to maintain an OEM-like appearance when installed. Design advantages include: Minimal visual intrusionCompact housingBalanced placement within cockpit layoutClean cable routing integration This ensures the switch complements factory controls rather than appearing as an aftermarket add-on. Ideal Applications Auxiliary light controlFog lamp controlSpotlight activationAccessory electrical systems The Maddog Switch is intended for riders who require simple and dependable electrical control. Kit Contents 1 × Maddog Switch (Backlit)1 × Mirror Mounting Clamp1 × Screw Set Supplied as a complete mounting-ready unit. Technical Specifications Brand: MaddogModel: Maddog SwitchType: Single-Channel Auxiliary SwitchIllumination: Red BacklightInstallation: Plug & PlayMaterial: High-Grade ABS Plastic + Metal Mounting PartsMount Type: Mirror or Handlebar ClampVoltage: 12V DCFitment: Universal Motorcycle Compatibility Important Notes Ensure compatibility with existing wiring harness before purchase.Not compatible with Maddog Switch Pro or Maddog Dimmer systems.Professional installation recommended for secure mounting and wiring.Confirm proper switch placement to avoid interference with riding controls. Summary The Maddog Auxiliary Light Switch provides clean, reliable control for single-channel auxiliary lighting systems. Featuring a red backlit button, plug-and-play compatibility, and dual mounting options, it delivers practical functionality without compromising cockpit aesthetics. Built for durability and designed for seamless integration, it is a straightforward solution for managing auxiliary lighting systems on 12V motorcycles. Simple control. Reliable switching. Clean integration.
Rs. 589.00
The Maddog Light Mounts are a universal auxiliary light mounting solution engineered for motorcycles that use crash bars, engine guards, or exposed tubular frames. Designed for riders who need secure, adjustable, and vibration-resistant mounting, these light mounts provide a practical way to install LED auxiliary lights without permanent modification to the motorcycle. Auxiliary lighting plays a critical role in improving visibility during night riding, adverse weather, and off-road conditions. The effectiveness of any auxiliary light setup depends heavily on how securely and accurately the lights are mounted. The Maddog Light Mounts are designed to address this requirement by offering stable clamping, controlled adjustability, and compatibility across a wide range of motorcycles. Wide Compatibility with 18mm–38mm Crash Bars These mounts are designed to fit round bars and tubes with diameters ranging from 18mm to 38mm (0.62in–1.5in). This range covers most commonly used crash bars, engine guards, and frame tubes found on adventure motorcycles, touring motorcycles, and dual-sport platforms. Because the mounts rely on a clamp-based system rather than model-specific brackets, they can be used across multiple motorcycle models without requiring vehicle-specific hardware. This universal fitment makes the Maddog Light Mounts suitable for both OEM and aftermarket crash bars, provided the bar diameter falls within the specified range. Clamp-Style Mounting with Rubber Isolation Each mount uses a clamp-style design that secures directly onto the bar surface using standard fasteners. The inner contact surface of the clamp is lined with high-density rubber padding, which serves multiple functional purposes. The rubber lining helps prevent direct metal-to-metal contact, reducing the risk of scratches or damage to painted, powder-coated, or plated crash bars. It also increases friction at the contact point, helping the mount maintain its position when exposed to vibration, road shocks, and repeated load cycles during riding. This design contributes to long-term mounting stability, especially in conditions such as highway cruising, broken roads, and off-road trails. 3D Axis Adjustable Light Positioning A defining feature of the Maddog Light Mounts is the 3D Axis adjustable mounting system. This system allows the mounted auxiliary light to be adjusted across multiple axes, giving riders precise control over both vertical and horizontal beam direction. This adjustability is especially useful when setting up auxiliary lights for different riding scenarios. Riders can angle lights further down the road or trail for long-distance visibility, or lower the beam to control glare during on-road use. Fine adjustment helps optimise illumination without relying on additional spacers or secondary brackets. Once adjusted, the mount is designed to hold the selected angle securely, helping prevent gradual movement due to vibration or uneven terrain. Designed for Practical, Non-Invasive Installation Installation of the Maddog Light Mounts does not require drilling, cutting, or permanent modification to the motorcycle. The mounts clamp directly onto the bar surface and can be adjusted or repositioned as needed. This non-invasive approach allows riders to add auxiliary lighting while retaining the motorcycle’s original structure and finish. Because the mounts function purely as a mechanical interface, they do not include lights, wiring, switches, or electrical components. Riders are free to pair them with compatible LED auxiliary lights such as spot lamps, fog lights, or compact driving lights, depending on their lighting requirements. Real-World Use and Mounting Position Advantages Crash-bar-mounted auxiliary lights are often preferred because they sit lower and further forward than handlebar-mounted options. This placement improves foreground illumination and reduces shadows caused by the motorcycle’s front fairing or windscreen. When paired with properly aimed auxiliary lights, this setup can significantly improve visibility in low-light and off-road environments. What’s Included Each kit includes one pair of Maddog Light Mounts, along with the required mounting hardware. These mounts are intended to support auxiliary lighting systems that fall within the mechanical limits of the clamp size and mounting surface.
Rs. 1,189.00
Maddog Standard Wire Harness: Reliable Motorcycle Wire Harness Solution The motorcycle wire harness named Maddog Standard Wire Harness offers a dependable wiring setup for auxiliary motorcycle lights. Riders who want a clean, durable, and safe electrical solution will find this product ideal. It supports auxiliary lights up to 100W / 10A. Perfect for daily riding and long touring. Constructed to endure harsh weather, it guarantees stable power without shortcuts or temporary fixes. This wire harness is vital for durability where it counts most. Seamless Integration with Existing Electrical Systems This reliable harness easily connects with any bike’s 12V electrical system. It eliminates the need for cutting or splicing factory wiring. The plug-and-play design allows auxiliary lighting setup while keeping the original electrical system intact. Its reversible design fits new models, existing motorcycles, and unique bikes like the Royal Enfield Classic 350. This ensures easy upgrades for many models. Built with Automotive-Grade Pure Copper Wiring Inside, you will find automotive-grade pure copper wiring for excellent conductivity and minimal voltage drop. This ensures consistent current without flickering, crucial for auxiliary lights. Stable illumination during night rides or low visibility protects both lights and electrical parts from harm. The quality copper wire ensures long-term reliability and performance. Durability Enhanced by Braided Mesh Sleeve The wiring is shielded by a braided mesh sleeve. It guards against abrasion, heat, and vibration. Hazards such as engine heat, road debris, and frame movement are common on a motorcycle ride. This protective meshing keeps internal wiring safe, especially near moving parts or frame. It greatly improves robustness with long-term use. IP-Rated Water-Resistant Connectors for All-Weather Use All connectors in this harness are IP-rated and water-resistant. They withstand rain, dust, splashes, and frequent cleaning, typical in motorcycle environments. The sealed connectors stop moisture intrusion, reducing corrosion and electrical issues. This ensures reliable lighting regardless of weather challenges. Motorcycle Wire Harness Safety and Load Management Safety is key with fire-retardant automotive-grade wires sized to handle different loads: 0.75, 1.0, and 2.5 sqmm. Each size manages heat and system stability well. Safe use during lengthy rides prevents overheating and protects the rider. This harness maintains steady, reliable power flow throughout all use. Plug-and-Play Installation and Organized Cable Management The setup is fully plug-and-play, requiring no cutting or splicing. Its design promotes clean cable routing from battery to auxiliary light fixtures. Organized cable management prevents clutter, loose connections, and faults. This suits both professional installers and DIY enthusiasts focusing on motorcycles and Harleydavidson bikes. Applications and Compatibility of This Motorcycle Wire Harness The Maddog harness supports LED fog lamps, driving lights, spot lamps, and smaller light bars. Power draw should not exceed the 100W limit to stay safe. Compatible with Maddog lights and many aftermarket brands, this wiring is made for 12V DC systems on motorcycles and scooters only. This product is unsuitable for four-wheel vehicles or heavy automotive wiring needs requiring different designs. Kit Contents and Essential Components 1 × Maddog Standard Wire Harness 2 × Tail connectors 1 × Set of zip ties Everything needed for installation is included. No extra parts are necessary, simplifying the setup for riders. When installed, the harness becomes the dependable backbone for your auxiliary lighting needs. It performs well in city riding, highways, and harsh weather. Specifications Summary Maximum Load: 10A / 100W Voltage: 12V DC Wire Material: 100% pure copper Wire Sizes: 0.75 / 1.0 / 2.5 sqmm Connector Type: Water-resistant (IP-rated) Protection: Braided mesh sleeve Installation Type: Plug-and-play This motorcycle wire harness is engineered for riders focused on safety, stability, and clean wiring integration. Trust Maddog for a durable, dependable solution that fits a wide range of needs on any motorcycle.
Rs. 989.00
15A / 150W Capacity | Pure Copper | IP68 Waterproof | 12V DC Reliable Power Delivery for Dual Auxiliary Light Setups The Maddog Dual Wire Harness Pro is engineered to provide a stable, safe, and high-capacity electrical connection for dual auxiliary light installations on motorcycles. Designed to handle up to 15 Amps or 150 Watts, this premium wiring system ensures efficient current flow while protecting the motorcycle’s electrical architecture. Built for riders who install fog lamps, spotlights, or high-output LED auxiliary lights, the Dual Wire Harness Pro delivers controlled power distribution without voltage instability or unreliable connections. This is a performance-grade wiring solution designed for serious auxiliary lighting systems. Dual Output Configuration The harness is designed to power and control two auxiliary lights simultaneously. Dual output capability supports: Balanced power distributionClean electrical routingStable operation under loadCompatibility with dual-lamp setups up to 150W combined This configuration ensures both lights receive consistent power without overloading the circuit. Always ensure that total load does not exceed the specified 150W rating. 15 Amps / 150 Watts Load Capacity The Maddog Dual Wire Harness Pro supports a maximum load of 15 Amps or 150 Watts at 12V DC. This rating makes it suitable for: High-output LED auxiliary lightsDual fog light setupsDual spotlight configurationsAdventure and touring light systems Exceeding the rated capacity may lead to electrical stress. Load calculation is recommended before installation. 100% Pure Copper Wiring The harness is constructed using 100% pure copper conductors. Pure copper wiring provides: Improved electrical conductivityReduced resistanceLower voltage dropEnhanced efficiency under load This supports stable current delivery and minimizes heat buildup compared to lower-grade conductors. Automotive-Grade Fire-Retardant Wiring The harness incorporates 1.5 sq.mm, 2 sq.mm, and 2.5 sq.mm automotive-grade wiring. Wire gauge selection supports: High current flow stabilityLoad-bearing durabilityImproved thermal resistance Fire-retardant insulation enhances safety under continuous electrical load. IP68 Waterproof Connectors The Dual Wire Harness Pro features IP68-rated waterproof connectors. IP68 rating indicates: Protection against dust ingressResistance to water exposure under defined conditions These sealed connectors support reliable operation during: Heavy rainDusty trail ridingMud exposureLong-distance touring Proper sealing is essential during installation to maintain waterproof performance. Braided Mesh Protective Sleeve The harness is protected with a braided mesh sleeve designed to improve durability and visual integration. The braided sleeve provides: Abrasion resistanceHeat protectionImproved cable managementOEM-like appearance This layer enhances longevity when routed through engine bays or frame sections exposed to vibration and movement. Plug-and-Play Installation The Maddog Dual Wire Harness Pro is designed for simplified installation. Installation advantages include: No cutting requiredNo splicing requiredPre-configured connectorsIgnition bridge connector included The plug-and-play design reduces installation errors and maintains electrical integrity. Professional installation is recommended to ensure proper routing and fuse protection. Compatibility Compatible With: Maddog SwitchMaddog Dual Switch ProMaddog Switch Pro systems Not Compatible With: Maddog Dimmer Ensure compatibility before installation. Universal Motorcycle Fitment Designed for universal 12V motorcycle systems. Suitable for: Adventure motorcyclesStreet motorcyclesTouring motorcyclesDual-sport bikes Proper mounting and routing depend on available frame space and battery access. Kit Contents 1 × Maddog Dual Wire Harness Pro2 × Tail Connectors1 × Ignition Bridge Connector1 × Set of Zip Tags Supplied as a complete wiring kit for dual auxiliary light installations. Technical Specifications Brand: MaddogProduct Type: Dual Auxiliary Light Wiring HarnessMax Load: 15 Amps / 150 WattsVoltage: 12V DCWire Material: 100% Pure CopperWire Gauge: 1.5 / 2 / 2.5 sq.mm Automotive-GradeProtection: Braided Mesh SleeveConnectors: IP68 WaterproofUsage: Dual Auxiliary Light SetupFitment: Universal Motorcycle Compatibility Important Notes Do not exceed 150W total load.Ensure proper fuse protection during installation.Confirm compatibility with lighting system before purchase.Professional installation recommended for optimal electrical safety. Summary The Maddog Dual Wire Harness Pro is a high-capacity, automotive-grade wiring solution designed to safely power dual auxiliary lights up to 150W. Built with pure copper conductors, IP68 waterproof connectors, and braided mesh protection, it delivers stable current flow and long-term durability in demanding riding conditions. Engineered for reliability. Built for safe auxiliary lighting integration.
Rs. 2,489.00
90W | 11,200 Lumens | Dual Beam | IP67 | 12V–36V Serious Illumination for Serious Riders The Moto Genius VK60 Auxiliary LED Spotlight System is engineered for riders who require high-output, road-focused illumination beyond standard headlight capability. Designed for motorcycles and electric vehicles, the VK60 delivers controlled brightness, dual-beam versatility, and electrical stability through an integrated intelligent coding controller. This is a functional visibility upgrade — built to extend confidence during night riding, highway touring, and adverse weather conditions. 90W High-Power LED Output At the core of the VK60 is a 90W high-power LED system delivering up to 11,200 lumens of luminous output (as specified by the manufacturer). High-output illumination supports: Improved road surface visibilityExtended forward beam reachEnhanced peripheral awarenessGreater clarity during unlit highway sections The beam is engineered for controlled distribution rather than uncontrolled glare, supporting practical road usability. Actual brightness perception may vary depending on mounting position, vehicle height, and beam alignment. Dual Beam Configuration The VK60 features a dual-beam output system designed for different riding conditions: Yellow Low BeamOptimized for rain, fog, dust, and low-visibility environments White High Beam (6000K)Designed for maximum throw distance and long-range illumination This dual-color configuration allows riders to adapt to changing road and weather conditions. Color temperature and output are engineered to balance visibility with usable beam focus. Intelligent Coding Controller Included with the VK60 is an intelligent coding controller that manages electrical input and output behavior. Controller benefits include: Stable current regulationFlicker-free performanceInstant start-up responsePredictable beam activation The controller ensures compatibility across a wide voltage range while protecting the LED system from unstable electrical input. Wide Voltage Compatibility (12V–36V) The VK60 operates across a 12V–36V input range, making it compatible with: Petrol motorcyclesAdventure motorcyclesTouring bikesElectric motorcycles and EV platforms Wide voltage compatibility allows installation across multiple vehicle types without requiring complex electrical modification. IP67 Waterproof & Sealed Construction The VK60 housing is rated IP67 for water and dust resistance. IP67 indicates: Protection against dust ingressResistance to water exposure under defined conditions The sealed construction supports reliable performance during: Heavy rainDusty trail ridingVibration-heavy terrain The housing is built for real-world riding environments rather than controlled showroom conditions. Non-Destructive Installation The VK60 system is designed for non-destructive installation. This means: No cutting of original wiring harness requiredReversible installationClean integration with mounting hardware Installation depends on available mounting points such as: Front forksCrash guardsAuxiliary brackets Professional installation is recommended for optimal beam alignment and electrical routing. Thermal Management & Service Life High-power LED systems require efficient thermal control. The VK60 is engineered to deliver strong output while maintaining controlled heat behavior. Features include: Low heat output relative to output powerExtended service life under proper installationStable long-duration operation Proper mounting allows airflow around the housing for optimal thermal performance. What’s in the Box 2 × Moto Genius VK60 LED Spotlights1 × Intelligent Coding ControllerMounting HardwareWiring Kit Supplied as a complete auxiliary spotlight system (pair). Technical Specifications Brand: Moto GeniusModel: VK60Power Output: 90WLuminous Output: Up to 11,200 lumensColor Temperature: 6000K White + Yellow BeamInput Voltage: 12V–36VWaterproof Rating: IP67Controller: Intelligent Coding Controller IncludedApplication: Motorcycles & Electric Vehicles Fitment & Compatibility Universal motorcycle fitment Suitable for: Touring motorcyclesAdventure (ADV) bikesStreet motorcyclesElectric motorcycles Installation depends on available mounting points and bracket configuration. Important Notes Professional installation recommended for proper beam alignment and wiring integration.Check local regulations regarding auxiliary lighting usage on public roads.Designed for performance visibility enhancement, not decorative lighting. Summary The Moto Genius VK60 Auxiliary LED Spotlight System delivers 90W high-output illumination, dual-beam adaptability, and intelligent electrical control in a sealed IP67-rated housing built for real-world riding. With 11,200 lumens of controlled output, 12V–36V compatibility, and non-destructive installation design, the VK60 is engineered to extend riding visibility and stability after sunset. High output. Intelligent control. Road-focused visibility.
Rs. 8,000.00
Purpose-Built Mahindra Thar Light Mount The Maddog Thar Bonnet Clamp is a precision LED light mounting solution designed specifically for the New Mahindra Thar. It allows vehicle owners to fit auxiliary lighting without altering factory body panels or making permanent modifications. Mounted directly on the bonnet, these clamps offer a stable and repeatable mounting point for LED pods, driving lights, or auxiliary lamps used in off-road and low-visibility situations. This mounting solution is perfect for Thar enthusiasts who value both functionality and preserving the original bodywork. The clamps provide reliable support for a variety of auxiliary lighting needs. Dual-Point Clamp Design for Optimal Load Distribution The system employs a dual-point (2-point) clamp design, which distributes the load of the mounted light more evenly than single-point brackets. This load distribution is essential for maintaining stability, especially under vibration or uneven terrain during off-road driving. By spreading forces across two contact points, the clamp keeps the light’s position steady over time. This smart design enhances durability and performance, minimizing the risk of mounting loosening or misalignment during rough use. Designed for Perfect Fitment on the Thar Bonnet The clamp is custom-shaped to fit the specific contours of the Mahindra Thar bonnet. Rather than forcing a one-size-fits-all bracket, the geometry follows factory lines to ensure proper alignment and seating. This thoughtful design prevents uneven pressure on the bonnet panel and ensures consistent fitment. Such precise shaping makes installation straightforward while protecting the body panel from damage. High-Quality Material and Finish Each clamp is made from laser-cut steel, chosen for strength, precision, and resistance to deformation. Laser cutting ensures clean edges with tight mounting tolerances, so both clamps sit evenly once installed. These tight tolerances support uniform appearance, reliable mounting, and easier installation. The clamps receive a textured matte black powder coating finish. This coating protects from corrosion, moisture, and surface wear. It is tougher than basic paint, offering resistance to chipping and abrasion. This finish helps the clamps withstand dusty or wet environments, muddy trails, and regular washing. Easy, Reversible Bolt-On Installation The Maddog Thar Bonnet Clamp is a bolt-on installation with no drilling or permanent modifications required. This feature suits owners who want a reversible setup or wish to keep the factory body intact. Installation involves positioning the clamp on designated bonnet mounting points and securing it using the included hardware. Because the clamp leverages the vehicle’s existing structure, the fitment remains consistent and repeatable. Compatibility with a Range of LED Auxiliary Lights From a compatibility viewpoint, these clamps work with most common LED auxiliary lights, including LED pods, compact driving lamps, and fog-style lights. The mounting surface fits standard auxiliary light brackets, allowing flexibility in light choice and beam pattern to suit driving needs. The clamps serve purely as a mounting interface and do not come with lights or electrical components. Bonnet-Mounted Lighting Benefits Auxiliary lights mounted to the bonnet improve forward and peripheral illumination during off-road driving, trail navigation, and low-light conditions. Mounting lights at bonnet height directs illumination ahead while minimizing blocking by the vehicle body. This position helps achieve controlled beam placement and reduces glare common with roof mounts. Exclusively Designed for the New Mahindra Thar Light Mount Needs The Maddog Thar Bonnet Clamp is designed exclusively for the New Mahindra Thar. Fitment depends on the unique bonnet design and mounting geometry of this vehicle. The clamps are not suitable for other vehicles since different bonnet shapes affect alignment and stability. This exclusive compatibility ensures an optimal fit and reliable mounting performance. Kit Contents and Additional Notes Each kit includes one pair of Maddog Thar Bonnet Clamps. This allows mounting two auxiliary lights or a single light depending on the setup. Lighting units, wiring harnesses, switches, and electrical accessories are not included and must be sourced separately. By choosing this Mahindra Thar light mount, users gain a durable, high-quality mounting solution tailored perfectly to the Thar and its LED lighting requirements.
Rs. 1,499.00 Rs. 1,489.00
You have seen 24 out of 32 products
Light up your path. Command attention.
Upgrade your visibility with high-performance LEDs, fog lamps, and auxiliary lights. Engineered for endurance and clarity, our lighting range keeps you safe and stylish on every ride — day or night.
See more. Be seen. Ride safe.
