KTM 390 Adventure / Adventure X Accessories

Heavy-Duty Saddle Stay for KTM Adventure 390 – Touring & Pannier Support System The LCB Casus Saddle Stay for KTM Adventure 390 is engineered for riders who load up and go. Built to support saddlebags and panniers across highways, mountain passes, and broken terrain, this stay provides structural stability without compromising the motorcycle’s balance or geometry. Adventure motorcycles are meant to carry gear. But luggage without proper support becomes a liability. Uncontrolled movement can cause instability, stress the subframe, interfere with suspension travel, or make contact with the exhaust. The Casus Saddle Stay eliminates those risks through rigid mounting structure and calculated load placement. When touring long distance, structural support matters more than styling. Structural Engineering & Tubular Strength The Casus Saddle Stay is constructed from premium mild steel tubing selected for load-bearing reliability. Mild steel provides: High tensile strength Resistance to bending under load Durability under repeated vibration Long-term structural integrity Tubular construction increases rigidity while maintaining manageable weight. The frame design is built to resist flex during cornering, braking, and uneven terrain riding. This is especially important for adventure motorcycles, where suspension movement and chassis dynamics are constantly changing. Controlled Luggage Positioning & Clearance One of the primary purposes of a saddle stay is controlled spacing. The Casus Stay is designed to: Keep saddlebags clear of the exhaust Prevent contact with swingarm movement Maintain distance from rear wheel travel Preserve suspension articulation Improper clearance leads to melted bags, uneven wear, and potential safety hazards. This design ensures consistent separation even when carrying heavy loads. Load stability is maintained through evenly distributed mounting points aligned with the KTM Adventure 390’s chassis architecture. Balanced Load Distribution Touring stability depends on symmetrical weight distribution. The Casus Saddle Stay features: Ergonomic geometry aligned with rear subframe Even mounting placement across both sides Reduced leverage effect from overhang weight Stable center of gravity retention When luggage sits too far outward or too high, it alters handling response. This stay keeps the load positioned close to the chassis to maintain predictable ride dynamics. Whether riding two-up or solo, balanced luggage placement reduces fatigue and improves long-distance control. Corrosion Resistance & Durability Adventure motorcycles encounter: Rain exposure Dust-heavy environments Road salt Heat cycles Continuous vibration The matte black powder-coated finish enhances corrosion resistance while protecting the metal surface from oxidation and abrasion. It also resists minor scratches from strap contact and luggage movement. The finish integrates seamlessly with the KTM Adventure 390’s rugged visual identity. Precision Fitment for KTM Adventure 390 This saddle stay is designed exclusively for KTM Adventure 390 and aligns with factory mounting points. Installation is: Direct bolt-on No cutting No drilling No frame modification The mounting structure distributes load properly across the chassis to avoid stress concentration on a single point. Once installed, it sits firmly without vibration-induced rattle or movement. Proper fitment preserves structural integrity and maintains factory aesthetics. Real-World Touring Advantage For riders heading out on extended tours, saddle stays are not optional equipment. They are structural safeguards. Without proper support: Saddlebags sag Luggage shifts Contact with exhaust becomes likely Rear handling becomes unpredictable With proper support: Load remains secure Stability improves Fatigue decreases Touring confidence increases The Casus Saddle Stay allows riders to carry heavier loads without compromising handling characteristics. This is mechanical reinforcement for long-haul reliability. Key Features Designed specifically for KTM Adventure 390 Heavy-duty mild steel tubular construction Corrosion-resistant matte black powder coating Maintains safe clearance from exhaust and swingarm Ergonomic design for even load distribution Reduces vibration and movement under load Direct bolt-on installation with no modifications required Construction Overview Material: Premium mild steel tubingFinish: Matte black powder-coatedFitment: KTM Adventure 390Installation: Direct bolt-onApplication: Saddlebag and pannier support Why This Upgrade Matters Adventure motorcycles are built for distance and load-bearing. A properly engineered saddle stay protects luggage, preserves handling stability, and prevents mechanical interference. The LCB Casus Saddle Stay strengthens the KTM Adventure 390’s touring capability without altering ride geometry or suspension performance. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. For complete details, refer to your Warranty Policy.

Read more less

Heavy-Duty Lower Crash Guard for KTM Adventure 390 – Engine & Frame Protection The LCB Bellator Lower Crash Guard for KTM Adventure 390 is engineered for riders who understand that impact protection is not optional on an adventure motorcycle. Built to shield the engine casing, lower frame rails, and exhaust routing from fall damage and trail impact, this crash guard reinforces the most vulnerable structural zones of your ADV 390. Adventure motorcycles are tall, torque-heavy machines. A low-speed tip-over on uneven terrain can easily damage engine casings or frame mounts. A rocky descent or pothole impact can expose lower components to direct contact. The Bellator Lower Crash Guard is designed to absorb and redirect that impact energy before it reaches critical mechanical parts. This is structural protection — not decorative tubing. High-Tensile Mild Steel Construction The Bellator Guard is constructed from high-tensile mild steel, selected specifically for impact resistance and structural reliability. Mild steel offers: High impact absorption capacity Controlled deformation under force Strong weld integrity Long-term fatigue resistance Crash guards must handle both static load (bike weight during a fall) and dynamic load (impact during motion). The tubular structure of the Bellator Guard distributes force across multiple mounting points rather than concentrating stress in a single area. This controlled energy dispersion reduces the likelihood of frame stress or localized bending. Engine & Lower Frame Defense The lower section of the KTM Adventure 390 houses some of the most expensive and vulnerable components: Engine casing Exhaust routing Frame rails Mounting brackets In the event of a fall or slide, these areas are often the first contact points. The Bellator Lower Crash Guard is positioned to: Create a protective perimeter around the engine Maintain clearance from exhaust components Prevent direct casing impact Absorb lateral and angled force By creating a buffer zone between ground and engine structure, it reduces mechanical damage risk during tip-overs or uneven terrain incidents. Precision Fitment & Vibration Control Crash protection must remain stable under vibration and dynamic riding conditions. The Bellator Guard is designed exclusively for KTM Adventure 390 and aligns with factory mounting architecture. This ensures: Even load distribution Secure structural anchoring Reduced vibration movement No interference with suspension travel Installation is direct bolt-on. No cutting.No drilling.No frame modification. Proper alignment prevents rattle and ensures the guard remains structurally stable during high-speed riding and rough terrain operation. Corrosion Resistance & Surface Durability Adventure motorcycles face environmental exposure continuously: Rain Dust Mud Heat cycles Road debris The matte black powder-coated finish enhances corrosion resistance while protecting the steel tubing from oxidation and surface degradation. It also integrates seamlessly with the KTM Adventure 390’s aggressive design profile, preserving factory aesthetics while adding structural presence. Modular Compatibility with Raptor Upper Guard The Bellator Lower Crash Guard is compatible with the LCB Raptor Upper Crash Guard, allowing riders to create a full-body crash protection system. When combined: Upper structure protects fuel tank and fairing Lower structure protects engine and frame Integrated setup enhances full-impact defense This modular approach allows riders to expand protection gradually without replacing existing components. Real-World Riding Advantage Adventure motorcycles are designed to explore unpredictable terrain. Even experienced riders face unexpected balance loss, gravel shifts, or surface irregularities. A properly engineered crash guard: Reduces engine damage risk Lowers repair cost exposure Maintains ride continuity after minor falls Preserves structural integrity Confidence increases when mechanical risk decreases. The Bellator Guard is built for riders who use their ADV 390 as intended — not cautiously. Key Features Designed specifically for KTM Adventure 390 High-tensile mild steel construction Protects engine casing, exhaust, and lower frame Matte black powder-coated finish for corrosion resistance Direct bolt-on installation Compatible with LCB Raptor Upper Crash Guard Stable mounting with vibration control Construction Overview Material: High-tensile mild steelFinish: Matte black powder-coatedFitment: KTM Adventure 390Installation: Direct bolt-onApplication: Engine and lower frame protection Why Lower Crash Protection Matters Lower crash zones are high-impact areas during falls. Reinforcing these zones prevents expensive engine damage and reduces mechanical downtime. The LCB Bellator Lower Crash Guard strengthens the KTM Adventure 390’s structural resilience without compromising handling or aesthetics. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. For complete details, refer to your Warranty Policy.

Read more less

Heavy-Duty Upper Crash Guard for KTM Adventure 390 – Tank & Fairing Protection The LCB Raptor Upper Crash Guard for KTM Adventure 390 is engineered for riders who push beyond paved limits and demand structural protection where it matters most. Designed to shield the fuel tank, fairing panels, and upper radiator zone, this crash guard forms a reinforced perimeter around critical bodywork and mechanical components. Adventure motorcycles are tall and leverage-heavy machines. In a fall, impact rarely stays confined to one point. The upper body panels — tank shrouds, radiator edges, and fairing structures — are highly exposed. A low-speed tip-over can crack plastics. A trail slide can deform mounting brackets. The Raptor Upper Crash Guard is built to absorb and redirect impact energy before it reaches those vulnerable areas. This is not aesthetic tubing. It is structural reinforcement for real-world riding conditions. High-Grade Mild Steel Structural Framework The Raptor Guard is constructed from high-grade mild steel tubing selected for controlled impact absorption and long-term structural integrity. Mild steel offers: High tensile strength Reliable weld bonding Progressive deformation under load Resistance to fatigue from vibration In crash protection, material behavior matters. A guard must not be overly brittle, nor excessively soft. It should absorb energy while maintaining frame alignment. The tubular geometry distributes force across multiple mounting points, preventing concentrated stress at a single bracket. This controlled force dispersion reduces the risk of chassis stress or panel deformation. Upper Body Protection Coverage The Raptor Upper Crash Guard is positioned to protect: Fuel tank shrouds Side fairing panels Radiator upper edges Front structural brackets During a fall, these zones typically contact the ground first at upper height. Without protection, cosmetic damage escalates quickly into structural repair. The Raptor design creates a protective cage that sits offset from the body panels, forming an impact buffer zone. This separation ensures that in most low to moderate falls, the crash guard contacts the ground before the motorcycle body does. Protection is proactive, not reactive. Precision Alignment & Vibration Stability Crash guards must align with the chassis architecture to avoid stress imbalance. The Raptor Upper Guard is engineered exclusively for KTM Adventure 390 and mounts directly to factory load-bearing points. This ensures: Balanced structural anchoring Proper force transfer to frame Reduced vibration under riding conditions No interference with suspension travel Installation is direct bolt-on. No drilling.No cutting.No permanent modification. Once mounted, the guard maintains rigid alignment even under high-speed riding or off-road vibration exposure. A poorly fitted crash guard becomes a liability. Precision mounting prevents that. Corrosion Resistance & Finish Durability Adventure riding exposes upper frame components to: Rain Mud Dust Road debris Heat cycles The matte black powder-coated finish enhances corrosion resistance and protects the steel tubing from oxidation. It also resists minor abrasions from trail contact and cleaning processes. Visually, the matte finish integrates seamlessly with the KTM Adventure 390’s aggressive styling, reinforcing the bike’s adventure-focused character. Modular Compatibility with Bellator Lower Guard The Raptor Upper Crash Guard is fully compatible with the LCB Bellator Lower Crash Guard, allowing riders to create a complete crash protection system. When paired: Upper structure protects tank and fairings Lower structure protects engine and frame Combined system enhances full impact coverage This modular protection architecture allows gradual upgrades without replacing existing components. Real-World Riding Advantage Adventure motorcycles are built to be used — not preserved. Even experienced riders encounter unpredictable surfaces, loose gravel, or uneven terrain. Crash protection reduces the cost and consequence of those moments. A properly engineered upper crash guard: Protects expensive body panels Reduces radiator damage risk Preserves fuel tank integrity Minimizes downtime after minor falls Confidence increases when mechanical vulnerability decreases. The Raptor Upper Crash Guard is designed for riders who treat protection as preparation — not an afterthought. Key Features Designed specifically for KTM Adventure 390 High-grade mild steel tubular construction Shields fuel tank, fairings, and upper radiator zone Matte black powder-coated finish for corrosion resistance Rigid structure for effective crash absorption Direct bolt-on installation with no modification required Compatible with LCB Bellator Lower Crash Guard Construction Overview Material: High-grade mild steel tubingFinish: Matte black powder-coatedFitment: KTM Adventure 390Installation: Direct bolt-onApplication: Upper body crash protection Why Upper Crash Protection Matters Upper body panels and fuel tanks are high-cost components. Reinforcing these areas reduces repair risk and increases long-term reliability. The LCB Raptor Upper Crash Guard strengthens the KTM Adventure 390’s defensive architecture without compromising ride dynamics or design integrity. Warranty This product comes with a 6-month manufacturer warranty from Legundary Custom Builds against manufacturing defects. RawTorque does not provide additional warranty coverage beyond the manufacturer’s policy. For complete details, refer to your Warranty Policy.

Read more less

Race Dynamics FlashX Hazard Module for KTM Adventure 250 & 390 (Plug & Play | 60 Patterns | 3-Year Warranty) KTM Adventure hazard module is a purpose-built, plug-and-play safety and visibility upgrade designed for KTM Adventure motorcycles 250 / 390. Developed to integrate smoothly with the electrical systems of these models, the KTM Adventure hazard module adds advanced hazard flashing features without altering the bike’s stock wiring or controls. Modern adventure motorcycles ride across various environments—busy city streets, highways, and difficult terrain. Visibility plays a vital role in keeping riders safe. This KTM Adventure hazard module delivers controlled, eye-catching hazard flash patterns, helping improve motorcycle visibility during emergencies, breakdowns, poor-visibility situations, or slow-speed conditions. Plug-and-Play Integration of KTM Adventure hazard module The module is engineered as a true plug-and-play module. Installation requires no splicing, wire cutting, soldering, or adding switches. It connects directly to the motorcycle’s existing indicator socket, preserving the factory wiring harness and OEM electrical integrity. This makes it perfect for riders wanting reversible or warranty-safe upgrades. Once installed, the KTM Adventure hazard module works with the stock indicator switches. There is no need for extra handlebar buttons or controls. It feels native to the bike, not an aftermarket attachment. Multiple Hazard Flash Patterns This module offers 60 onboard hazard flash patterns. Riders can select patterns that suit their environment or preference. Patterns range from standard flashes to dynamic sequences attracting attention when stopped or moving slowly. Switching between patterns provides flexibility for urban riding, touring, highway emergencies, or off-road group rides. All flashing modes are managed internally, requiring no programming tools or smartphone apps. Turn Signal Priority and Electrical Compatibility A key feature is turn signal priority logic. Regular indicator use is never compromised. When using turn signals, the module prioritizes them, ensuring legal and clear signaling. The module supports both LED and conventional bulb indicators, compatible with stock or aftermarket lights. It manages electrical load internally, ensuring stable operation across indicator types. Built for Adventure Conditions The KTM Adventure hazard module uses automotive-grade electronic components chosen for durability and reliability. Its housing is water-resistant and heat-resistant, ideal for rain, dust, heat, and vibration while riding. Adventure motorcycles face harsher environments than street bikes. This module is designed to operate reliably during daily commutes, long tours, or light off-road trips. OEM-Level Design and Warranty The module meets OEM standards for performance and electrical safety. It is backed by an official 3-year manufacturer warranty from Race Dynamics. This warranty reflects confidence in the module’s long-term durability and quality. RawTorque functions only as a reseller and does not provide extra warranty beyond the manufacturer’s coverage. Warranty claims follow Race Dynamics’ official policies. Model Compatibility The KTM Adventure hazard module is specifically designed for: KTM Adventure 250 KTM Adventure 390 Installation on other motorcycles is not advised unless explicitly approved by the manufacturer. Use Case Summary This KTM Adventure hazard module is perfect for riders seeking: Better visibility in emergencies or slow-moving scenarios A clean electrical upgrade with no invasive wiring Multiple flashing options without extra switches Reliable function across diverse riding environments An OEM-grade accessory with warranty coverage Important Notes Plug-and-play installation; no wiring changes needed Compatibility with LED and bulb indicators Manufacturer warranty applies; reseller warranty excluded Always obey local traffic laws on hazard light use

Read more less