Products

NGage HB184 / HBS184 Front Brake Pads for Bajaj Dominar 400 (2019) & Pulsar RS200 – Ceramic & Sintered Options (Front Only) The NGage HB184 and HBS184 front brake pads are disc brake pads developed for select Bajaj motorcycles requiring this exact pad shape and specification. According to NGage’s official brake pad compatibility chart, these pad codes are specified for the front brake caliper position on the motorcycles listed below. This listing applies strictly to the front brake position and covers only: Bajaj Dominar 400 (2019 model year)Bajaj Pulsar RS 200 It does not apply to other Dominar 400 model years. Correct pad shape is critical for braking alignment and caliper fitment. Even if motorcycles share engine platforms, brake caliper design can differ by year. HB184 and HBS184 are specified only where this exact pad code is required. Official Compatibility – Front Brake Only As per NGage’s published compatibility chart: Bajaj Dominar 400 (2019) – Front brakeBajaj Pulsar RS 200 – Front brake Compatibility applies strictly to the front brake caliper position. This listing does not include rear brake pads. Rear pads use a different specification. Buyers must confirm their exact motorcycle model year before ordering. Variant Options – Material Difference Only This product is available in two NGage-defined material variants: HB184 – Whisker CeramicHBS184 – Sintered Both variants share: Identical shapeIdentical mounting dimensionsIdentical caliper fitment The only difference between them is the friction compound composition. HB184 – Whisker Ceramic (Ultimate+ Series) The HB184 variant is classified by NGage under the Whisker Ceramic Ultimate+ brake pad series. According to NGage’s HB series material overview, this compound includes: Ceramic-based friction matrixWhisker fibre reinforcementFiller materials Ceramic compounds are commonly selected for: Smooth engagementControlled braking modulationReduced harshness at the leverStreet-oriented braking behaviour The Whisker Ceramic variant is positioned as a street-focused braking option within NGage’s lineup. HBS184 – Sintered Brake Pads The HBS184 variant belongs to NGage’s sintered brake pad series. Sintered brake pads are manufactured by fusing metallic powders under high heat and pressure. This creates a dense metallic friction compound typically associated with: Higher thermal stabilityDurability under repeated braking cyclesStronger friction characteristics compared to ceramic variants The HBS184 maintains identical physical dimensions to HB184 but differs in friction material composition. Choosing the Correct Variant Both HB184 and HBS184 fit: Bajaj Dominar 400 (2019) – FrontBajaj Pulsar RS 200 – Front The selection depends purely on material preference: HB184 – Whisker Ceramic compoundHBS184 – Metallic Sintered compound No additional performance claims beyond NGage’s classification are implied. Construction & Classification Overview HB184 – Whisker CeramicCeramic-based friction compoundWhisker fibre reinforcementClassified under NGage Ultimate+ series HBS184 – SinteredMetallic fused friction compoundManufactured using sintering processClassified under NGage HBS series Both variants are: ARAI Tested (as shown on NGage chart)Manufactured in Japan (as indicated on chart)Designed for front brake application only Verified Specifications (From NGage Chart Only) Brand: NGageProduct Type: Motorcycle brake padsPosition: Front Pad Codes:HB184 – Whisker CeramicHBS184 – Sintered Compatibility:Bajaj Dominar 400 (2019) – FrontBajaj Pulsar RS 200 – Front Certification Marking: ARAI TestedManufacturing Origin: Japan Important Installation Notes Install only in the front brake caliper of listed motorcyclesConfirm correct pad code before purchaseEnsure caliper, disc, and hardware are clean and serviceableFollow proper bed-in procedure after installationProfessional installation recommended Incorrect pad selection or improper installation may affect braking performance. Summary The NGage HB184 and HBS184 front brake pads are position-specific brake pads developed for Bajaj Dominar 400 (2019 model year) and Bajaj Pulsar RS 200 motorcycles. Both variants share identical shape and fitment dimensions. The difference lies solely in the friction compound classification — Whisker Ceramic (HB184) or Sintered (HBS184). Designed strictly for the front brake position as per NGage’s official compatibility chart, these pads provide model-specific fitment accuracy and material choice within NGage’s brake pad lineup. Correct year. Correct pad code. Correct front fitment.

Read more less

NGage HB 184 / HBS 184 Front Brake Pads for TVS RR 310 – Ceramic & Sintered Options (Front Only) The NGage HB 184 and HBS 184 front brake pads are disc brake pads developed for motorcycles where this exact pad shape and specification is required. These brake pads are listed by NGage for use on the TVS RR 310 in the front brake caliper position. As per the official NGage brake pad compatibility chart, the TVS RR 310 uses the following front brake pad codes: Front: HB 184 (Whisker Ceramic) Front: HBS 184 (Sintered) This listing covers the front brake pad set only for the TVS RR 310. Application Context Brake pads are a wear component in a motorcycle’s braking system. Their role is to generate friction against the brake disc when hydraulic pressure is applied through the brake caliper. Correct brake pad selection depends on the caliper design, disc size, mounting geometry, and backing plate dimensions specified for a given motorcycle. NGage pad codes define the physical pad shape, backing plate profile, thickness, and mounting features required for a specific brake caliper. For the TVS RR 310, NGage specifies pad code HB 184 / HBS 184 for the front brake position. Pads with a different code should not be used even if they appear visually similar. Compatibility (Front Only) As per NGage’s official compatibility chart: TVS RR 310 – Front brake Variant Explanation This product is available in two NGage material variants, as defined by NGage’s own brake pad series classification. HB 184 – Whisker Ceramic Brake Pads Ceramic-based friction compound reinforced with whisker fibers Classified by NGage as Whisker Ceramic Ultimate+ Brake Pads Uses a ceramic matrix combined with reinforcing fibers and fillers, as described in NGage’s HB-series material overview HBS 184 – Sintered Brake Pads Metallic sintered friction compound Manufactured using fused metallic powders under heat and pressure Classified by NGage as Sintered Brake Pads under the HBS-series Both variants are identical in shape, fitment, and mounting dimensions.Only the friction material composition differs between HB and HBS variants. Specifications  Brand: NGage Product Type: Motorcycle brake pads Position: Front Pad Codes: HB 184 – Whisker Ceramic HBS 184 – Sintered Compatibility: TVS RR 310 – Front Certification Marking: ARAI Tested  Manufacturing Origin: Japan  Installation / Usage Notes Install only in the front brake caliper of the TVS RR 310 Use only the brake pad code specified for your exact motorcycle and brake position Ensure the caliper, disc, and pad retaining hardware are clean and in serviceable condition before installation Follow a standard bed-in procedure after installation Professional installation is recommended

Read more less

Why Choose Ngage Front Brake Pads for BMW 310 & S1000R? The Ngage HB 184 Front Brake Pads are compatible with: BMW G 310 R BMW G 310 GS BMW S1000R (2014–2024) These brake pads are available in two compound variants: Sintered Whisker Ceramic (Ultimate+) This listing is specifically for the Front brake position (HB 184 code). Compatibility Front Brake Pads – HB 184 Compatible Models: BMW G 310 R BMW G 310 GS BMW S1000R (2014–2024) Always verify your existing pad shape before ordering. Variant 1: Sintered Brake Pads Ngage Sintered Brake Pads – Performance Compound Sintered brake pads are manufactured using a high-temperature sintering process where metallic powders are fused under extreme heat and pressure to form a dense compound. Friction Materials Include: Copper (heat dissipation & thermal stability) Steel/Iron (structural strength) Brass (thermal conductivity) Graphite (wear reduction) Carbon fibers (strength reinforcement) Molybdenum Disulfide (MoS2) (reduces friction under pressure) Performance Characteristics Friction Coefficient: 0.55 – 0.65 Shear Strength: > 8 N/mm² Thermal Resistance: Up to 1000°C Estimated Life: 12,000 – 18,000 km (normal riding conditions) Best Suited For Aggressive riding High-speed braking Touring Off-road usage Heavy motorcycles Sintered pads are designed for higher heat resistance and stronger initial bite under demanding conditions. Variant 2: Whisker Ceramic Ultimate+ Brake Pads Ngage Whisker Ceramic Brake Pads – Enhanced Ceramic Compound Whisker Ceramic brake pads incorporate microscopic fiber-like reinforcements (“whiskers”) within the ceramic matrix to enhance braking stability and durability. Friction Materials Include: Whisker Filament High-end Ceramic Fiber  High-end Mineral Fiber  High-end Aramid Fiber  Copper Fiber This blended structure is engineered to enhance strength, durability, and overall braking consistency. Performance Characteristics Friction Coefficient: 0.45 – 0.60 Shear Strength: 4.5 N/mm² Thermal Resistance: Up to 650°C Estimated Life: 15,000 – 25,000 km (normal riding conditions) Best Suited For Daily commuting Urban riding Riders prioritizing longevity Lower brake dust preference Smoother braking feel Whisker Ceramic pads are engineered for consistent performance and longer lifespan under standard riding conditions. Key Differences – Sintered vs Whisker Ceramic Feature Sintered Whisker Ceramic Heat Resistance Higher (up to 1000°C) Moderate (up to 650°C) Initial Bite Stronger Progressive Lifespan Moderate Longer Riding Style Aggressive / Touring Daily / Commuting Position Front Brake Pads Pad Code: HB 184 Product Specifications Brand: Ngage Powerparts Pad Code: HB 184 Position: Front Compatibility: BMW G 310 R / G 310 GS / S1000R (2014–2024) Variants Available: Sintered / Whisker Ceramic ARAI Tested Made in Japan

Read more less

NGage HB 008 / HBS 008 Front Brake Pads for Hero Xpulse 200 & 210 – Ceramic & Sintered Options (Front Only) The NGage HB 008 and HBS 008 front brake pads are disc brake pads developed for the front brake caliper used on the Hero Xpulse 200 and Hero Xpulse 210. These brake pads are manufactured to match the exact pad shape, mounting profile, and contact surface geometry required by the front braking system fitted to these motorcycles, ensuring correct physical fitment and consistent disc engagement. This product listing applies strictly to the front brake position. The rear brake pads for these models use a different pad code and are listed separately. Front brake pads carry the primary braking load on a motorcycle. The majority of stopping force is generated at the front wheel, which makes front brake pad selection critical for braking confidence, lever feel, and controlled deceleration. A front brake pad must deliver predictable bite, stable friction output, and consistent performance across varying temperatures and braking loads. NGage offers the HB 008 front brake pad shape in two friction material variants: Whisker Ceramic (HB 008) and Sintered (HBS 008). Both variants share identical physical dimensions and mounting geometry. The difference lies entirely in the friction compound formulation and how it behaves under heat, load, and repeated braking cycles. Whisker Ceramic Variant — HB 008 The HB 008 Whisker Ceramic brake pads use a ceramic-based friction compound reinforced with fiber-like whiskers. This compound is engineered to deliver smooth initial bite, progressive braking force buildup, and stable friction output during everyday riding conditions. The ceramic matrix allows controlled modulation at the brake lever, which is particularly useful for urban riding, highway cruising, and mixed riding environments where precise braking control is preferred. The whisker reinforcement improves structural stability within the friction layer, helping the pad maintain consistent surface behavior under repeated braking cycles. This compound is intended for riders who prioritize refined braking feel, predictable front brake response, and consistent deceleration without aggressive bite characteristics. Sintered Variant — HBS 008 The HBS 008 Sintered brake pads use a metallic friction compound formed by fusing metal powders under high temperature and pressure. This manufacturing process produces a dense, wear-resistant friction material with high thermal stability and consistent friction output under elevated braking loads. Sintered brake pads are engineered to tolerate higher operating temperatures and maintain braking performance during repeated hard braking, extended downhill descents, and off-road riding conditions where brake heat buildup is significant. The metallic composition offers stronger initial bite and sustained friction consistency under conditions where brake temperatures fluctuate rapidly. This compound is intended for riders who operate in aggressive riding conditions, carry heavier loads, or frequently ride in environments that generate higher front brake temperatures. Fitment & Compatibility This listing applies to the front brake position on the following motorcycles: Compatibility (Front Brake Only)Hero Xpulse 200Hero Xpulse 210 The HB 008 and HBS 008 pad shape is shared across these two models for the front caliper. Rear brake pads use a different pad code and must be purchased separately. Variant Explanation This product is available in two NGage material variants: HB 008 — Whisker Ceramic Brake PadsCeramic-based friction compoundOptimized for smooth braking responseProgressive front brake feelStable friction behavior under normal thermal loadsSuitable for daily riding, touring, and mixed conditions HBS 008 — Sintered Brake PadsMetallic sintered friction compoundHigher temperature toleranceStronger braking bite under loadConsistent friction during repeated brakingSuitable for aggressive riding and high-heat conditions Both variants are identical in shape, thickness profile, and mounting design. Only the friction compound differs. Specifications Brand: NGageProduct Type: Motorcycle Disc Brake PadsPosition: FrontPad Codes: HB 008 (Whisker Ceramic), HBS 008 (Sintered)Material Options: Ceramic-based or Metallic SinteredCertification: ARAI TestedManufacturing Origin: JapanApplication Type: Front brake caliperMounting: Direct replacement design Installation / Usage Notes • Designed as a direct replacement for the stock front brake pads• No modification required for compatible models• Install only in the front brake caliper• Ensure brake caliper pistons are properly retracted before installation• Clean the caliper bracket and pad guide surfaces prior to fitting• Bedding-in procedure is recommended after installation• Avoid aggressive braking for the first 150–200 km to allow proper pad transfer• Professional installation is advised for optimal braking performance Correct bedding-in is essential to achieve stable friction behavior and consistent braking feel. Improper bedding may result in uneven pad wear or reduced braking efficiency.

Read more less

The NGage HB 089 and HBS 089 front brake pads are engineered for Honda’s CB 350 platform, covering the CB 350 H’ness, CB 350RS, and CB 350. These pads are designed to match the front brake caliper dimensions and mounting profile required for these motorcycles, ensuring direct fitment without modification. This listing is for the front brake position only. Rear brake pads are listed separately under a different product code. NGage offers this pad shape in two distinct friction materials—Whisker Ceramic and Sintered—allowing riders to select the compound that best aligns with their riding style, usage pattern, and braking preference. Friction Material Options (Variants) HB 089 — Whisker Ceramic Brake PadsThis variant uses NGage’s whisker-reinforced ceramic compound, designed to deliver progressive braking feel, consistent modulation, and stable performance under everyday riding conditions. The ceramic matrix is optimized for controlled heat behavior and smooth engagement, making it well-suited for city riding, touring, and highway use. HBS 089 — Sintered Brake PadsThis variant uses a metallic sintered friction compound formed under high temperature and pressure. It is engineered for higher thermal stability and strong bite under demanding braking conditions. The sintered formulation is suitable for aggressive riding, high-load usage, and situations where consistent braking performance is required at elevated temperatures. Both variants share the same physical shape, thickness, and mounting profile. Only the friction compound differs. Compatibility — Front Brake Only Honda CB 350 H’nessHonda CB 350RSHonda CB 350 This listing applies strictly to the front brake caliper of the above models. Technical Overview Brand: NGageProduct Type: Motorcycle Disc Brake PadsPosition: FrontPad Codes: HB 089 (Whisker Ceramic), HBS 089 (Sintered)Material Options: Ceramic-based or Sintered metallicCertification: ARAI Tested Manufacturing Origin: Japan  Installation & Use Notes • Designed for direct replacement in the stock front caliper• No modification required when installed on compatible models• Follow standard brake pad bedding-in procedures after installation• Professional installation recommended for optimal braking performance• Always replace brake pads as a complete axle set

Read more less

NGage HB 104 / HBS 104 Rear Brake Pads for Hero Xpulse 200 & 210 – Ceramic & Sintered Options (Rear Only) The NGage HB 104 and HBS 104 rear brake pads are disc brake pads developed for the rear brake caliper used on the Hero Xpulse 200 and Hero Xpulse 210. These brake pads are manufactured to match the exact pad shape, mounting profile, and contact surface geometry required by the rear braking system fitted to these motorcycles, ensuring correct physical fitment and consistent disc engagement. This product listing applies strictly to the rear brake position. The front brake pads for these models use a different pad code and are listed separately. Rear brake pads play a stabilizing role in a motorcycle’s braking system. While the front brake provides the majority of stopping force, the rear brake contributes to balance, low-speed control, corner stability, and controlled deceleration. A rear brake pad must deliver predictable bite, smooth modulation, and stable friction behavior across varying temperatures and road conditions. NGage offers the HB 104 rear brake pad shape in two friction material variants: Whisker Ceramic (HB 104) and Sintered (HBS 104). Both variants share identical physical dimensions and mounting geometry. The difference lies entirely in the friction compound formulation and how it behaves under heat, load, and repeated braking cycles. Whisker Ceramic Variant — HB 104 The HB 104 Whisker Ceramic brake pads use a ceramic-based friction compound reinforced with fiber-like whiskers. This compound is engineered to deliver controlled braking response, predictable modulation, and stable friction output during everyday riding conditions. The ceramic matrix provides smooth engagement at the brake lever and progressive braking force buildup, making it well-suited for urban commuting, highway touring, and mixed riding environments. The whisker reinforcement enhances structural stability within the friction layer, helping the pad maintain consistent surface behavior during repeated braking cycles. This compound is designed for riders who prioritize refined rear brake feel, controlled deceleration, and low-noise operation while maintaining reliable braking performance under normal thermal loads. Sintered Variant — HBS 104 The HBS 104 Sintered brake pads use a metallic friction compound formed by fusing metal powders under high temperature and pressure. This manufacturing process produces a dense, durable friction material with high thermal stability and consistent friction output under elevated braking loads. Sintered brake pads are engineered to tolerate higher operating temperatures and maintain braking performance during repeated hard braking, high-speed riding, and extended downhill descents. The metallic composition offers stronger initial bite and sustained friction consistency under conditions where brake heat buildup is significant. This compound is intended for riders who operate in aggressive riding conditions, carry heavier loads, or frequently ride in environments that generate higher rear brake temperatures. Fitment & Compatibility This listing applies to the rear brake position on the following motorcycles: Compatibility (Rear Brake Only)Hero Xpulse 200Hero Xpulse 210 The HB 104 and HBS 104 pad shape is shared across these two models for the rear caliper. Front brake pads use a different pad code and must be purchased separately. Variant Explanation This product is available in two NGage material variants: HB 104 — Whisker Ceramic Brake PadsCeramic-based friction compoundOptimized for smooth braking responseProgressive rear brake feelStable friction behavior under normal thermal loadsSuitable for daily riding, touring, and mixed conditions HBS 104 — Sintered Brake PadsMetallic sintered friction compoundHigher temperature toleranceStronger braking bite under loadConsistent friction during repeated brakingSuitable for aggressive riding and high-heat conditions Both variants are identical in shape, thickness profile, and mounting design. Only the friction compound differs. Specifications Brand: NGageProduct Type: Motorcycle Disc Brake PadsPosition: RearPad Codes: HB 104 (Whisker Ceramic), HBS 104 (Sintered)Material Options: Ceramic-based or Metallic SinteredCertification: ARAI TestedManufacturing Origin: JapanApplication Type: Rear brake caliperMounting: Direct replacement design Installation / Usage Notes • Designed as a direct replacement for the stock rear brake pads• No modification required for compatible models• Install only in the rear brake caliper• Ensure brake caliper pistons are properly retracted before installation• Clean the caliper bracket and pad guide surfaces prior to fitting• Bedding-in procedure is recommended after installation• Avoid aggressive braking for the first 100–150 km to allow proper pad transfer• Professional installation is advised for optimal braking performance Correct bedding-in is essential to achieve stable friction behavior and consistent braking feel. Improper bedding may result in uneven pad wear or reduced braking efficiency.

Read more less

The NGage HB 150 and HBS 150 rear brake pads are designed for Honda’s CB 350 platform, covering the CB 350 H’ness, CB 350RS, and CB 350. These pads are shaped to match the rear brake caliper profile used on these motorcycles, ensuring correct fitment and proper contact with the brake disc. This listing is for the rear brake position only. Front brake pads for these models are listed separately under a different pad code. NGage offers this pad shape in two friction material options—Whisker Ceramic and Sintered—allowing riders to select the compound that best suits their braking preference, riding style, and operating conditions. Friction Material Options (Variants) HB 150 — Whisker Ceramic Brake PadsThis variant uses NGage’s whisker-reinforced ceramic compound, engineered for smooth braking response and controlled modulation. The ceramic matrix is tuned for stable everyday performance, making it suitable for urban riding, highway use, and touring where predictable rear brake feel is preferred. HBS 150 — Sintered Brake PadsThis variant uses a metallic sintered friction compound formed under high temperature and pressure. It is built for higher thermal stability and stronger bite under demanding braking conditions. The sintered formulation is suited for riders who load the rear brake more aggressively or ride in conditions that generate higher brake temperatures. Both variants share the same physical dimensions and mounting geometry. Only the friction compound differs. Compatibility — Rear Brake Only Honda CB 350 H’nessHonda CB 350RSHonda CB 350 This listing applies strictly to the rear brake caliper of the above models. Technical Overview Brand: NGageProduct Type: Motorcycle Disc Brake PadsPosition: RearPad Codes: HB 150 (Whisker Ceramic), HBS 150 (Sintered)Material Options: Ceramic-based or Sintered metallicCertification: ARAI Tested (as indicated by NGage)Manufacturing Origin: Japan (as indicated by NGage) Installation & Use Notes • Designed for direct replacement in the stock rear caliper• No modification required when installed on compatible models• Follow standard brake pad bedding-in procedures after installation• Professional installation recommended for consistent braking performance• Always replace brake pads as a complete axle set where applicable

Read more less

The NGage HB 150 and HBS 150 rear brake pads are motorcycle disc brake pads developed for Yamaha motorcycles that use the HB 150 rear pad profile. These brake pads are engineered to match the exact mounting shape, backing plate geometry, and friction surface dimensions required by the rear brake caliper used on the compatible Yamaha models. This ensures proper physical fitment, consistent contact with the brake disc, and stable braking performance when installed correctly. This product listing applies strictly to the rear brake position. Front brake pads for these motorcycles use a different pad code and are sold as a separate product. Rear brake pads play a critical role in overall braking balance, vehicle stability, and low-speed braking control. While the front brake generates most of the stopping force, the rear brake contributes to smooth deceleration, traction control during braking, and rider confidence in slow-speed maneuvers and corner entry. A properly matched rear brake pad must provide predictable bite, controlled modulation, and stable friction output across a wide temperature range. It must also maintain structural integrity under repeated braking cycles without glazing, excessive fade, or inconsistent friction behavior. The NGage HB 150 rear brake pad shape is designed to meet these requirements while maintaining direct compatibility with the listed Yamaha rear brake caliper system. NGage offers the HB 150 rear brake pad in two distinct friction material variants: Whisker Ceramic (HB 150) and Sintered (HBS 150). Both variants are manufactured using the same physical pad dimensions and mounting design. The difference lies entirely in the friction compound formulation and how it behaves under heat, braking load, and repeated use. Whisker Ceramic Variant — HB 150 The HB 150 Whisker Ceramic brake pads use a ceramic-based friction compound reinforced with fiber-like whisker material. This compound is engineered to deliver smooth initial bite, progressive braking force buildup, and stable friction output during everyday riding conditions. Ceramic friction compounds are known for producing controlled braking response with reduced noise characteristics and consistent lever feel. The whisker reinforcement enhances the internal structure of the friction layer, helping the pad maintain uniform contact with the brake disc surface under varying pressure levels. This variant is intended for riders who prioritize refined braking feel, predictable rear brake response, and smooth modulation during city riding, highway cruising, and mixed riding environments. The ceramic compound supports consistent friction behavior without aggressive bite characteristics, making it well-suited for riders who prefer a linear and controlled rear brake feel. Sintered Variant — HBS 150 The HBS 150 Sintered brake pads use a metallic friction compound formed by fusing metal powders under high temperature and pressure. This sintering process produces a dense and wear-resistant friction material with high thermal stability and consistent friction output under elevated braking loads. Sintered brake pads are engineered to tolerate higher operating temperatures and maintain braking performance during repeated braking cycles, extended downhill descents, and riding conditions where brake heat buildup is significant. The metallic composition offers stronger initial bite compared to ceramic compounds and sustained friction consistency when brake temperatures fluctuate rapidly. This variant is intended for riders who operate in more demanding riding conditions, carry heavier loads, or frequently ride in environments that generate higher rear brake temperatures. The sintered compound maintains structural integrity and friction performance under conditions where softer compounds may experience fade or inconsistent response. Fitment & Compatibility (Rear Brake Only) Yamaha R15 V1Yamaha R15 V2 This product listing covers only the rear brake pad set for the listed motorcycles. Front brake pads for these models use a different NGage pad code and must be purchased separately. Variant Explanation HB 150 — Whisker Ceramic Brake PadsCeramic-based friction compoundSmooth braking responseProgressive rear brake feelStable friction behavior under normal thermal loads HBS 150 — Sintered Brake PadsMetallic sintered friction compoundHigher temperature toleranceStronger braking bite under loadConsistent friction during repeated braking Both variants are identical in shape, thickness profile, and mounting design. Only the friction compound differs. Construction & Design Characteristics The NGage HB 150 and HBS 150 brake pads are manufactured with a rigid steel backing plate that maintains dimensional stability under braking pressure. The friction layer is bonded to the backing plate using high-temperature bonding methods to prevent separation under thermal stress. The pad surface geometry is designed to promote even contact with the brake disc, reducing uneven wear and maintaining consistent friction output throughout the service life of the pad. The chamfered edges and surface profile help minimize vibration, reduce brake noise, and support smooth engagement during light braking. Both variants are engineered to operate across a wide temperature range while maintaining predictable friction behavior. Proper bedding-in after installation is recommended to ensure optimal contact between the pad surface and brake disc. Specifications Brand: NGageProduct Type: Motorcycle Disc Brake PadsPosition: RearPad Codes: HB 150 (Whisker Ceramic), HBS 150 (Sintered)Certification: ARAI TestedManufacturing Origin: JapanMounting: Direct replacement design Installation & Usage Notes • Designed as a direct replacement for the stock rear brake pads• No modification required for compatible models• Install only in the rear brake caliper• Bedding-in procedure recommended after installation• Avoid aggressive braking for the first 150–200 km• Inspect brake disc condition before installation• Professional installation advised for best results

Read more less

NGage HB 155 / HBS 155 Front Brake Pads for Yamaha R15 V3, V4, MT-15 & FZ Series – Ceramic & Sintered Options (Front Only) The NGage HB 155 / HBS 155 Front Brake Pads are disc brake pads engineered specifically for Yamaha motorcycles that use the HB 155 front pad profile. These pads are designed to match the exact mounting geometry, backing plate design, and contact surface dimensions required by the front brake calipers fitted on compatible Yamaha models. The result is precise physical fitment and consistent disc engagement without modification. This listing applies strictly to the front brake position. Rear brake pads for these motorcycles use a different pad code and are sold separately. Always confirm you are replacing the front set before installation. Front brake pads handle the majority of braking force on a motorcycle. Under deceleration, weight transfers forward, increasing load on the front wheel. This makes front brake pad selection critical for braking confidence, lever feel, and overall stopping stability. A properly matched pad must deliver predictable bite, stable friction output, and consistent thermal behavior across varying riding conditions. NGage offers the HB 155 pad shape in two friction material variants: HB 155 (Whisker Ceramic) and HBS 155 (Sintered). Both variants share identical physical dimensions, mounting points, and thickness profile. The only difference lies in the friction compound formulation and its behavior under heat and load. Whisker Ceramic – HB 155 The HB 155 Whisker Ceramic brake pads use a ceramic-based friction compound reinforced with micro “whisker” fibers. This compound is engineered to deliver smooth initial bite and progressive braking force buildup. Ceramic pads are known for: • Controlled and predictable lever response• Stable friction under moderate operating temperatures• Reduced visible brake dust• Refined engagement suited to city and highway riding The whisker reinforcement enhances structural stability inside the friction layer. This helps maintain consistent braking feel during repeated stop-and-go use. Riders who prioritize modulation, comfort, and progressive front brake control typically prefer this compound. Sintered – HBS 155 The HBS 155 Sintered brake pads use a metallic friction compound formed by fusing metal powders under high temperature and pressure. This process produces a dense, thermally stable friction material. Sintered pads are engineered for: • Higher heat tolerance• Stronger initial bite• Consistent friction under repeated braking• Improved resistance to fade under heavy load This compound is intended for riders who frequently ride aggressively, carry heavier loads, or operate in high-temperature environments. Under sustained braking stress, sintered pads maintain more stable friction characteristics compared to organic compounds. Fitment & Compatibility (Front Brake Only) Compatible Yamaha models include: Yamaha R15 V3Yamaha R15 V4Yamaha MT-15Yamaha FZ25Yamaha FZ16Yamaha Fazer 250 Fitment is based strictly on the HB 155 front pad profile used in these models. Always verify your existing pad code or consult your service manual before ordering. Material Behavior & Performance Orientation Brake pad performance is influenced by riding style, terrain, traffic conditions, and braking intensity. Riders who operate primarily in urban or mixed-use environments may prefer the smoother engagement of ceramic pads. Riders who frequently brake aggressively or ride in demanding heat conditions may prefer the stronger bite and thermal stability of sintered pads. Both variants are engineered to meet modern disc brake performance requirements and are ARAI tested as specified by the manufacturer. Specifications Brand: NGageProduct Type: Motorcycle Disc Brake PadsPosition: FrontPad Codes: HB 155 (Whisker Ceramic), HBS 155 (Sintered)Certification: ARAI TestedCountry of Manufacture: JapanMounting: Direct replacement design Installation Notes • Designed as a direct replacement for stock front brake pads• No modification required for compatible models• Install only in the front brake caliper• Bedding-in procedure recommended after installation• Avoid aggressive braking for the first 150–200 km Proper bedding allows an even transfer layer to form between the pad and disc surface. This improves braking consistency and minimizes uneven wear patterns. What’s Included 1 × Set of NGage Front Brake Pads(Variant selected: HB 155 or HBS 155)

Read more less

The NGage HB 163 and HBS 163 Rear Brake Pads are disc brake pads developed for vehicles that use the 163 rear pad profile. For the Ather 450 and Ather 450X, this pad code is specified for the rear brake caliper position. This listing covers the rear brake pads only. It is available in two NGage friction variants: HB 163 (Whisker Ceramic) and HBS 163 (Sintered). Both variants share identical pad shape, backing plate dimensions, and mounting geometry. The only difference lies in the friction compound used. Compatibility (Rear Only) As per NGage fitment specification: • Ather 450 – Rear• Ather 450X – Rear These brake pads are engineered specifically for the rear caliper fitment of the above models. They are not interchangeable with the front caliper position. Pad Variant Explanation This product is offered in two material configurations under the same pad profile: HB 163 – Whisker Ceramic Brake Pads Ceramic-based friction compound reinforced with whisker filament technology. Designed for:• Balanced braking feel• Progressive modulation• Reduced brake dust output• Smooth rear brake engagement This variant is typically chosen for urban riding, daily commuting, and controlled braking preference. Ceramic compounds prioritize stability and clean operation over aggressive bite. HBS 163 – Sintered Brake Pads Metallic sintered compound manufactured by high-temperature fusion of metal powders. Designed for:• Higher thermal tolerance• Stronger initial bite• Improved heat dissipation• Greater fade resistance Sintered pads are generally preferred for harder braking cycles, frequent stops, or riders who want a firmer rear brake response. Construction & Performance Characteristics Both variants are built on identical backing plates and mounting geometry. Fitment remains unchanged regardless of material selected. The friction compound is the only variable. Ceramic compounds operate efficiently within moderate temperature ranges typical of city use. They are commonly selected where controlled braking feel and reduced visible dust are preferred. Sintered compounds maintain friction stability under higher thermal loads. They are typically selected where braking systems experience repeated heat cycles. Both variants are listed by NGage as: • ARAI Tested• Manufactured in Japan No additional performance claims beyond manufacturer classification are implied. Why Rear Brake Pad Selection Matters on Ather 450 / 450X The Ather platform delivers instant electric torque, which places different loading characteristics on the braking system compared to conventional ICE motorcycles. Rear brake control plays an important role in: • Low-speed maneuvering• Controlled deceleration• Traffic riding stability• Progressive braking modulation Selecting the correct compound helps match braking feel to riding style. Ceramic emphasizes smoothness and modulation.Sintered emphasizes bite and heat tolerance. The correct choice depends on rider preference and usage pattern. Key Features • Direct-fit rear brake pad set for Ather 450 & 450X• Available in Ceramic (HB 163) and Sintered (HBS 163)• Identical fitment across both variants• ARAI tested as per brand classification• Manufactured in Japan• Designed for rear caliper position only Specifications Brand: NGage PowerpartsPosition: RearPad Codes: HB 163 (Ceramic), HBS 163 (Sintered)Fitment: Ather 450, Ather 450XCertification: ARAI TestedCountry of Manufacture: JapanFitment Type: Direct replacement Installation Notes • Install in rear caliper position only• Confirm pad code before installation• Professional installation recommended• Perform proper bedding-in after installation Bedding-in allows friction material to transfer evenly onto the brake disc surface. Proper bedding improves consistency and reduces uneven wear patterns. Brake system inspection during pad replacement is recommended. Always follow torque and service guidelines as per vehicle manufacturer documentation. What’s Included 1 × Pair of NGage Rear Brake Pads(Variant selected: HB 163 or HBS 163) No additional mounting pins, shims, or hardware are included unless explicitly shown in product images.

Read more less

The NGage HB 163 and HBS 163 rear brake pads are disc brake pads developed for the rear brake caliper used on Triumph’s 400-series motorcycles, including the Speed 400, Scrambler 400X, and T4. These pads are manufactured to match the exact pad shape, mounting dimensions, and contact profile required by the rear brake system fitted to these motorcycles, ensuring correct physical fitment and consistent disc engagement. This product listing applies strictly to the rear brake position. The front brake pads for these models use different pad codes and are listed separately. Rear brake pads play a critical stabilizing role in a motorcycle’s braking system. While the front brake provides the majority of stopping force, the rear brake contributes to balance, low-speed control, corner stability, and controlled deceleration. A rear brake pad must deliver predictable bite, smooth modulation, and stable friction behavior across varying temperatures and road conditions. NGage offers the HB 163 rear brake pad shape in two distinct friction material variants: Whisker Ceramic (HB 163) and Sintered (HBS 163). Both variants share identical physical dimensions and mounting geometry. The difference lies entirely in the friction compound formulation and its behavior under load and temperature. Whisker Ceramic Variant — HB 163 The HB 163 Whisker Ceramic brake pads use a ceramic-based friction compound reinforced with fiber-like whiskers. This compound is engineered to deliver controlled braking response, predictable modulation, and stable friction output during everyday riding conditions. The ceramic matrix provides smooth engagement at the brake lever and progressive braking force buildup, making it well-suited for urban commuting, highway touring, and mixed riding environments. The whisker reinforcement enhances structural stability within the friction layer, helping the pad maintain consistent surface behavior during repeated braking cycles. This compound is designed for riders who prioritize refined rear brake feel, controlled deceleration, and low-noise operation while maintaining reliable braking performance under normal thermal loads. Sintered Variant — HBS 163 The HBS 163 Sintered brake pads use a metallic friction compound formed by fusing metal powders under high temperature and pressure. This manufacturing process produces a dense, durable friction material with high thermal stability and consistent friction output under elevated braking loads. Sintered brake pads are engineered to tolerate higher operating temperatures and maintain braking performance during repeated hard braking, high-speed riding, and extended downhill descents. The metallic composition offers stronger initial bite and sustained friction consistency under conditions where brake heat buildup is significant. This compound is intended for riders who operate in aggressive riding conditions, carry heavier loads, or frequently ride in environments that generate higher rear brake temperatures. Fitment & Compatibility This listing applies to the rear brake position on the following motorcycles: Compatibility (Rear Brake Only)Triumph Speed 400Triumph Scrambler 400XTriumph T4 The HB 163 and HBS 163 pad shape is shared across these three models for the rear caliper. Front brake pads use different pad codes and must be purchased separately. Variant Explanation This product is available in two NGage material variants: HB 163 — Whisker Ceramic Brake PadsCeramic-based friction compoundOptimized for smooth braking responsePredictable modulation and controlled rear brake feelStable friction behavior under normal thermal loadsSuitable for daily riding, touring, and mixed conditions HBS 163 — Sintered Brake PadsMetallic sintered friction compoundHigher temperature toleranceStronger braking bite under loadConsistent friction during repeated brakingSuitable for aggressive riding and high-heat conditions Both variants are identical in shape, thickness profile, and mounting design. Only the friction compound differs. Specifications Brand: NGageProduct Type: Motorcycle Disc Brake PadsPosition: RearPad Codes: HB 163 (Whisker Ceramic), HBS 163 (Sintered)Material Options: Ceramic-based or Metallic SinteredCertification: ARAI TestedManufacturing Origin: JapanApplication Type: Rear brake caliperMounting: Direct replacement design Installation / Usage Notes • Designed as a direct replacement for the stock rear brake pads• No modification required for compatible models• Install only in the rear brake caliper• Ensure brake caliper pistons are properly retracted before installation• Clean the caliper bracket and pad guide surfaces prior to fitting• Bedding-in procedure is recommended after installation• Avoid aggressive braking for the first 100–150 km to allow proper pad transfer• Professional installation is advised for optimal braking performance Correct bedding-in is essential to achieve stable friction behavior and consistent braking feel. Improper bedding may result in uneven pad wear or reduced braking efficiency.

Read more less

The NGage HB 164 and HBS 164 front brake pads are disc brake pads developed for the front brake caliper used on the Triumph T4. These brake pads are manufactured to match the exact pad shape, mounting profile, and contact surface geometry required by the front braking system fitted to this motorcycle, ensuring correct physical fitment and consistent disc engagement. This product listing applies strictly to the front brake position. The rear brake pads for the Triumph T4 use a different pad code and are listed separately. Front brake pads carry the primary braking load on a motorcycle. The majority of stopping force is generated at the front wheel, making the quality and behavior of the front brake pads a key factor in braking confidence, lever feel, and controlled deceleration. A front brake pad must deliver predictable bite, stable friction output, and consistent performance across varying temperatures and braking loads. NGage offers the HB 164 front brake pad shape in two friction material variants: Whisker Ceramic (HB 164) and Sintered (HBS 164). Both variants share identical physical dimensions and mounting geometry. The difference lies entirely in the friction compound formulation and how it behaves under heat, load, and repeated braking cycles. Whisker Ceramic Variant — HB 164 The HB 164 Whisker Ceramic brake pads use a ceramic-based friction compound reinforced with fiber-like whiskers. This compound is engineered to deliver smooth initial bite, progressive braking force buildup, and stable friction output during everyday riding conditions. The ceramic matrix allows controlled modulation at the brake lever, which is particularly useful for urban riding, highway cruising, and mixed riding environments where precise braking control is preferred. The whisker reinforcement improves structural stability within the friction layer, helping the pad maintain consistent surface behavior under repeated braking cycles. This compound is intended for riders who prioritize refined braking feel, predictable front brake response, and consistent deceleration without aggressive bite characteristics. Sintered Variant — HBS 164 The HBS 164 Sintered brake pads use a metallic friction compound formed by fusing metal powders under high temperature and pressure. This manufacturing process produces a dense, wear-resistant friction material with high thermal stability and consistent friction output under elevated braking loads. Sintered brake pads are engineered to tolerate higher operating temperatures and maintain braking performance during repeated hard braking, extended downhill descents, and high-speed riding. The metallic composition offers stronger initial bite and sustained friction consistency under conditions where brake heat buildup is significant. This compound is intended for riders who operate in aggressive riding conditions, carry heavier loads, or frequently ride in environments that generate higher front brake temperatures. Fitment & Compatibility This listing applies to the front brake position on the following motorcycle: Compatibility (Front Brake Only)Triumph T4 The HB 164 and HBS 164 pad shape is specific to the front caliper used on the Triumph T4. Rear brake pads use a different pad code and must be purchased separately. Variant Explanation This product is available in two NGage material variants: HB 164 — Whisker Ceramic Brake PadsCeramic-based friction compoundOptimized for smooth braking responseProgressive front brake feelStable friction behavior under normal thermal loadsSuitable for daily riding, touring, and mixed conditions HBS 164 — Sintered Brake PadsMetallic sintered friction compoundHigher temperature toleranceStronger braking bite under loadConsistent friction during repeated brakingSuitable for aggressive riding and high-heat conditions Both variants are identical in shape, thickness profile, and mounting design. Only the friction compound differs. Specifications Brand: NGageProduct Type: Motorcycle Disc Brake PadsPosition: FrontPad Codes: HB 164 (Whisker Ceramic), HBS 164 (Sintered)Material Options: Ceramic-based or Metallic SinteredCertification: ARAI TestedManufacturing Origin: JapanApplication Type: Front brake caliperMounting: Direct replacement design Installation / Usage Notes • Designed as a direct replacement for the stock front brake pads• No modification required for compatible models• Install only in the front brake caliper• Ensure brake caliper pistons are properly retracted before installation• Clean the caliper bracket and pad guide surfaces prior to fitting• Bedding-in procedure is recommended after installation• Avoid aggressive braking for the first 150–200 km to allow proper pad transfer• Professional installation is advised for optimal braking performance Correct bedding-in is essential to achieve stable friction behavior and consistent braking feel. Improper bedding may result in uneven pad wear or reduced braking efficiency.

Read more less

The NGage HB 184 and HBS 184 front brake pads are disc brake pads developed for the front brake caliper used on the Triumph Speed 400 and Triumph Scrambler 400X. These brake pads are manufactured to match the exact pad shape, mounting profile, and contact surface geometry required by the front braking system fitted to these motorcycles, ensuring correct physical fitment and consistent disc engagement. This product listing applies strictly to the front brake position. The rear brake pads for these models use a different pad code and are listed separately. Front brake pads play the primary role in a motorcycle’s braking system. The majority of stopping force is generated at the front wheel, which makes front brake pad selection critical for braking confidence, lever feel, and controlled deceleration. A front brake pad must deliver stable friction behavior, predictable bite, and consistent performance across a wide range of temperatures and braking loads. NGage offers the HB 184 front brake pad shape in two friction material variants: Whisker Ceramic (HB 184) and Sintered (HBS 184). Both variants share identical physical dimensions and mounting geometry. The difference lies entirely in the friction compound formulation and how it behaves under heat, load, and repeated braking cycles. Whisker Ceramic Variant — HB 184 The HB 184 Whisker Ceramic brake pads use a ceramic-based friction compound reinforced with fiber-like whiskers. This compound is engineered to deliver smooth initial bite, progressive braking force buildup, and stable friction output during everyday riding conditions. The ceramic matrix allows controlled modulation at the brake lever, which is particularly useful in urban riding, highway cruising, and mixed riding environments where precise braking control is preferred. The whisker reinforcement improves structural stability within the friction layer, helping the pad maintain consistent surface behavior under repeated braking cycles. This compound is designed for riders who prioritize refined braking feel, predictable front brake response, and consistent deceleration without aggressive bite characteristics. Sintered Variant — HBS 184 The HBS 184 Sintered brake pads use a metallic friction compound formed by fusing metal powders under high temperature and pressure. This manufacturing process produces a dense, wear-resistant friction material with high thermal stability and consistent friction output under elevated braking loads. Sintered brake pads are engineered to tolerate higher operating temperatures and maintain braking performance during repeated hard braking, extended downhill descents, and high-speed riding. The metallic composition offers stronger initial bite and sustained friction consistency under conditions where brake heat buildup is significant. This compound is intended for riders who operate in aggressive riding conditions, carry heavier loads, or frequently ride in environments that generate higher front brake temperatures. Fitment & Compatibility This listing applies to the front brake position on the following motorcycles: Compatibility (Front Brake Only)Triumph Speed 400Triumph Scrambler 400X The HB 184 and HBS 184 pad shape is shared across these two models for the front caliper. Rear brake pads use a different pad code and must be purchased separately. Variant Explanation This product is available in two NGage material variants: HB 184 — Whisker Ceramic Brake PadsCeramic-based friction compoundOptimized for smooth braking responseProgressive front brake feelStable friction behavior under normal thermal loadsSuitable for daily riding, touring, and mixed conditions HBS 184 — Sintered Brake PadsMetallic sintered friction compoundHigher temperature toleranceStronger braking bite under loadConsistent friction during repeated brakingSuitable for aggressive riding and high-heat conditions Both variants are identical in shape, thickness profile, and mounting design. Only the friction compound differs. Specifications Brand: NGageProduct Type: Motorcycle Disc Brake PadsPosition: FrontPad Codes: HB 184 (Whisker Ceramic), HBS 184 (Sintered)Material Options: Ceramic-based or Metallic SinteredCertification: ARAI TestedManufacturing Origin: JapanApplication Type: Front brake caliperMounting: Direct replacement design Installation / Usage Notes • Designed as a direct replacement for the stock front brake pads• No modification required for compatible models• Install only in the front brake caliper• Ensure brake caliper pistons are properly retracted before installation• Clean the caliper bracket and pad guide surfaces prior to fitting• Bedding-in procedure is recommended after installation• Avoid aggressive braking for the first 150–200 km to allow proper pad transfer• Professional installation is advised for optimal braking performance Correct bedding-in is essential to achieve stable friction behavior and consistent braking feel. Improper bedding may result in uneven pad wear or reduced braking efficiency.

Read more less

NGage HB 238 / HBS 238 Rear Brake Pads for Yamaha R15 V3, V4, MT-15, FZ 25 & Fazer 250 – Ceramic & Sintered Options (Rear Only) The NGage HB 238 and HBS 238 rear brake pads are precision-engineered disc brake pads designed for Yamaha motorcycles that use the HB 238 pad shape specification at the rear caliper. These brake pads are intended as direct-fit replacements for factory rear pads on compatible Yamaha models, delivering stable braking performance, controlled heat behavior, and consistent pedal feel across everyday street riding as well as spirited use. Rear brake pads play a critical role in overall braking balance. While the front brake delivers the majority of stopping force, the rear brake stabilizes the chassis under braking, controls speed in low-traction conditions, and supports smooth deceleration in traffic, corners, and downhill riding. The NGage HB 238 and HBS 238 pads are built specifically for this rear-brake role, offering predictable bite, progressive engagement, and long-term durability. These pads are manufactured to match the exact dimensions and mounting profile required for the Yamaha rear calipers used on the listed models. Fitment, seating depth, backing plate thickness, and friction block positioning are all controlled to ensure correct alignment with the disc rotor and caliper pistons. This allows the pads to install cleanly without modification and operate within the factory braking geometry. Material Variants – Choose What Matches Your Riding Style This listing is offered in two NGage material variants, both sharing the same pad shape and fitment: HB 238 – Whisker Ceramic Brake PadsThe HB 238 uses a ceramic-based friction compound engineered for smooth, quiet braking and controlled wear characteristics. Ceramic pads are known for consistent modulation, low brake noise, and reduced rotor abrasion. This compound is well suited for riders who prioritize clean operation, stable braking feel, and predictable response in daily commuting and mixed riding conditions. HBS 238 – Sintered Brake PadsThe HBS 238 uses a metallic sintered friction compound designed for higher thermal stability and stronger braking bite under heat load. Sintered pads are formed by fusing metal powders under pressure and heat, producing a dense structure that resists fade and maintains braking effectiveness during aggressive riding, highway use, and repeated braking cycles. This compound is ideal for riders who demand sharper response and higher durability under demanding conditions. Both variants are identical in physical dimensions and mounting compatibility. The only difference lies in the friction material behavior and performance characteristics. Performance Behavior The NGage rear brake pads are designed to provide: • Progressive braking response without sudden lock-up• Stable friction coefficient across varied temperatures• Controlled heat dissipation for consistent braking feel• Even pad wear for predictable service intervals• Rotor-friendly surface finish to minimize disc scoring The friction layer thickness and backing plate stiffness are engineered to resist vibration and maintain stable contact pressure with the disc rotor. This contributes to reduced brake judder and improved pedal consistency during both light braking and heavy deceleration. Compatibility – Rear Brake Only These rear brake pads are engineered specifically for the following Yamaha motorcycles: • Yamaha R15 V3• Yamaha R15 V4• Yamaha MT-15• Yamaha FZ 25• Yamaha Fazer 250 This listing applies strictly to the rear brake position only. These pads are not interchangeable with front brake pads and must not be installed in the front caliper. Installation & Service Notes • Designed for direct replacement of the stock rear brake pads• No modifications required for installation• Proper bedding-in procedure recommended after installation• Brake fluid condition and rotor surface should be inspected before fitting new pads• Professional installation advised for riders unfamiliar with brake servicing Correct bedding-in helps establish proper friction layer transfer to the rotor surface and ensures optimal braking performance and pad longevity. Use Case Guidance Choose HB 238 (Whisker Ceramic) if you want:• Smooth braking feel• Lower brake noise• Stable performance for daily riding• Controlled rotor wear Choose HBS 238 (Sintered) if you want:• Stronger braking bite• Higher heat tolerance• Better performance under aggressive riding• Longer life in demanding conditions What’s Included • 1 × Pair of rear brake pads (either HB 238 or HBS 238 as selected)• Factory-finished backing plates• Pre-bonded friction material No additional hardware is included unless explicitly shown in the product images. Specifications (Metafields) Brand: NGageProduct Type: Motorcycle Disc Brake PadsPosition: RearPad Codes: HB 238 (Whisker Ceramic), HBS 238 (Sintered)Compatibility: Yamaha R15 V3, Yamaha R15 V4, Yamaha MT-15, Yamaha FZ 25, Yamaha Fazer 250Material Options: Ceramic-based compound (HB), Sintered metallic compound (HBS)Mounting Type: Direct replacementCertification: ARAI TestedCountry of Manufacture: Japan

Read more less

Precision Ignition Upgrade for 650 Twins The NGage High Performance Spark Plug Kit is engineered to enhance ignition efficiency across Royal Enfield 650 twin-cylinder engines. This is not just a replacement—it’s a complete ignition system upgrade designed for smoother, cleaner, and more responsive performance. ⚡ Improved Combustion Efficiency With NGK Iridium IX spark plugs and ultra low-resistance racing cables, the system ensures: Better spark consistency Cleaner combustion Reduced misfires 🧠 Smoother, More Responsive Engine Optimized ignition delivery results in: Improved throttle response Better acceleration feel More stable idle 🌧️ Reliable in All Conditions Designed to perform across varying environments: Easier cold starts Reliable ignition in wet weather Consistent performance in daily riding 🏁 Built for Street & Performance Use Compatible with stock and modified setups Works across touring, daily riding, and spirited use Suitable for BS4 & BS6 motorcycles 📦 WHAT’S INCLUDED NGK Iridium IX Spark Plugs (CR8EIX) – 2 Nos NGage Resistor Spark Caps (XD05F-R, 5kΩ) – 2 Nos NGage Racing Spark Plug Cables (Ultra Low Resistance) – 2 Nos

Read more less

NGage Hyper Flow Air Filter (NGAGE-007-JAWA500) for Jawa Classic, Forty Two & Yezdi Roadster – Washable Cotton Performance Replacement The NGage Hyper Flow Air Filter (NGAGE-007-JAWA500) is a reusable, washable cotton-gauze air filter developed for motorcycles built on the Jawa–Yezdi 300–334 cc platform. This air filter is designed as a direct replacement for the stock paper air filter used on the Jawa Classic, Jawa Forty Two, and Yezdi Roadster. As stated on NGage’s official product page and compatibility panel, this air filter is specified for the following motorcycles: Jawa Classic Jawa Forty Two Yezdi Roadster This listing covers these three models exactly as specified by the manufacturer. Designed for Jawa Classic, Forty Two & Yezdi Roadster NGage specifies this Hyper Flow Air Filter for motorcycles built on the Jawa–Yezdi platform. From the NGage product page: Suitable For: Jawa Classic Jawa Forty Two Yezdi Roadster The filter is engineered to fit directly into the factory airbox of the above motorcycles without requiring any cutting, trimming, or airbox modification. It is intended as a stock-replacement air filter element for routine service or intake performance upgrades. Hyper Flow Cotton Filter Construction NGage classifies the NGAGE-007-JAWA500 as a Hyper Flow Air Filter using a cotton-based filtering medium. From the product page and icon set: The filtering media is stated as 100% organic cotton The filter is described as washable and reusable The cotton media is supported by a molded filter frame to maintain structural shape inside the airbox The filter is designed for long-term reuse through periodic cleaning NGage does not publish micron ratings, pore size data, or laboratory filtration efficiency figures for this product. Airflow and Performance (Manufacturer-Stated) As per NGage’s official product material and feature icons, the NGage Hyper Flow Air Filter NGAGE-007-JAWA500 carries the following manufacturer-stated performance claims: Up to 30% increased air flow than stock filter No horsepower or torque increase figure is shown for this specific model on the NGage product page or artwork. Reusable and Serviceable Design The NGage Hyper Flow Air Filter is designed to be washed, serviced, and reused. Unlike disposable paper air filters that are replaced at each service interval, this cotton-gauze filter is intended to be cleaned and reused periodically. From the product page: The filter is described as washable The filter is described as reusable The filter uses cotton as the filtering medium NGage does not specify a fixed cleaning interval.Service frequency will depend on: Riding environment Dust exposure Terrain conditions Mileage covered Durability and Testing Claims From the product page and icon set, NGage states: Best durability Extensively tested on all terrains Hassle-free installation Eco-friendly product 100% organic cotton as filtering media These attributes are manufacturer-stated product characteristics as displayed on the NGage product page. Warranty Information (Manufacturer-Stated) From the NGage product page and feature icons: Replacement warranty: 100,000 kilometers NGage does not publish additional warranty terms or conditions on the product page. Warranty Note (RawTorque) RawTorque is an authorized reseller of NGage products and does not provide a separate warranty on this item. Any warranty coverage, replacement terms, or service claims are governed solely by NGage’s official warranty policy. RawTorque can assist customers in coordinating manufacturer warranty support where applicable. Manufacturing Origin From the NGage product artwork: Made in India Compatibility As per NGage’s official product page and compatibility panel for part number NGAGE-007-JAWA500: Jawa Classic Jawa Forty Two Yezdi Roadster Variant Explanation This listing is for: NGage Hyper Flow Air Filter Part Number: NGAGE-007-JAWA500 No alternate sizes, shapes, or engine-specific variants are shown or specified by NGage for this product. Specifications (Manufacturer-Verified Only) Brand: NGage Product Type: Hyper Flow Air Filter Part Number: NGAGE-007-JAWA500 Filter Media: 100% organic cotton Reusable: Yes Washable: Yes Installation Type: Direct replacement Application: Motorcycle air filter Compatibility: Jawa Classic, Jawa Forty Two, Yezdi Roadster Manufacturing Origin: India Airflow Claim: Up to 30% increased airflow than stock filter Warranty: Replacement warranty up to 100,000 km Testing Claim: Extensively tested on all terrains Installation / Usage Notes Install only on Jawa Classic, Jawa Forty Two, and Yezdi Roadster motorcycles. Designed to fit inside the factory airbox. Clean and reuse the filter periodically as required. Service frequency depends on riding conditions and dust exposure.

Read more less

NGage Hyper Flow Air Filter (NGAGE-012-YAR15V3) for Yamaha R15 V3, R15 V4 & MT-15 – Washable Cotton Performance Replacement The NGage Hyper Flow Air Filter (NGAGE-012-YAR15V3) is a reusable, washable cotton-gauze air filter developed specifically for Yamaha’s 155 cc platform. This air filter is designed as a direct replacement for the stock paper air filter used on the Yamaha R15 V3, Yamaha R15 V4, and Yamaha MT-15. As stated on NGage’s official product artwork and website listing, this air filter is compatible with the following motorcycles: Yamaha R15 V3 Yamaha R15 V4 Yamaha MT-15 This listing covers these three models exactly as specified by the manufacturer. Designed for Yamaha R15 V3, R15 V4 & MT-15 NGage specifies this Hyper Flow Air Filter for Yamaha motorcycles built on the 155 cc platform. From the NGage product artwork: Fits: Yamaha R15 V3 Yamaha R15 V4 Yamaha MT-15 The filter is engineered to fit directly into the factory airbox of the above motorcycles without requiring cutting, trimming, or airbox modification. It is intended as a stock-replacement air filter element for routine service or performance-oriented intake upgrades. Hyper Flow Cotton Filter Construction NGage classifies the NGAGE-012-YAR15V3 as a Hyper Flow Air Filter using a cotton-based filtering medium. From the product artwork and icon set: The filtering media is stated as 100% organic cotton The filter is described as washable and reusable The cotton media is supported by a molded filter frame to maintain structural shape inside the airbox The filter is designed for long-term reuse through periodic cleaning NGage does not publish micron ratings, pore size data, or laboratory filtration efficiency figures for this product. Airflow and Performance (Manufacturer-Stated) As per NGage’s official product artwork and website listing, the NGage Hyper Flow Air Filter NGAGE-012-YAR15V3 carries the following manufacturer-stated performance claims: Up to 30% increased air flow than stock filter Performance increase up to 0.6 BHP on wheels These airflow and performance figures are stated by NGage based on their internal testing and development data for this product. Reusable and Serviceable Design The NGage Hyper Flow Air Filter is designed to be washed, serviced, and reused. Unlike disposable paper air filters that are replaced at each service interval, this cotton-gauze filter is intended to be cleaned and reused periodically. From the product artwork: The filter is described as washable The filter is described as reusable The filter uses cotton as the filtering medium NGage does not specify a fixed cleaning interval. Service frequency will depend on: Riding environment Dust exposure Terrain conditions Mileage covered Durability and Testing Claims From the product artwork and icon set, NGage states: Best durability Extensively tested on all terrains Hassle-free installation Eco-friendly product 100% organic cotton as filtering media These attributes are manufacturer-stated product characteristics as displayed on the NGage artwork. Warranty Information (Manufacturer-Stated) From the product artwork and official website: Replacement warranty: 100,000 kilometers NGage does not publish additional warranty terms or conditions on the product page. Warranty Note (RawTorque) RawTorque is an authorized reseller of NGage products and does not provide a separate warranty on this item. Any warranty coverage, replacement terms, or service claims are governed solely by NGage’s official warranty policy. RawTorque can assist customers in coordinating manufacturer warranty support where applicable. Manufacturing Origin From the product artwork: Made in India Compatibility As per NGage’s official product artwork and website listing for part number NGAGE-012-YAR15V3: Yamaha R15 V3 Yamaha R15 V4 Yamaha MT-15 Variant Explanation This listing is for: NGage Hyper Flow Air Filter Part Number: NGAGE-012-YAR15V3 No alternate sizes, shapes, or engine-specific variants are shown or specified by NGage for this product. Specifications (Manufacturer-Verified Only) Brand: NGage Product Type: Hyper Flow Air Filter Part Number: NGAGE-012-YAR15V3 Filter Media: 100% organic cotton Reusable: Yes Washable: Yes Installation Type: Direct replacement Application: Motorcycle air filter Compatibility: Yamaha R15 V3, Yamaha R15 V4, Yamaha MT-15 Manufacturing Origin: India Airflow Claim: Up to 30% increased airflow than stock filter Performance Claim: Up to 0.6 BHP increase on wheels Warranty: Replacement warranty up to 100,000 km Testing Claim: Extensively tested on all terrains Installation / Usage Notes Install only on Yamaha R15 V3, R15 V4, and MT-15 motorcycles. Designed to fit inside the factory airbox. Clean and reuse the filter periodically as required. Service frequency depends on riding conditions and dust exposure.

Read more less

NGage Hyper Flow Air Filter (NGAGE-013YAR3) for Yamaha R3 & MT-03 – Washable 100% Cotton Reusable Performance Filter The NGage Hyper Flow Air Filter (NGAGE-013YAR3) is a reusable, washable cotton-gauze air filter developed specifically for Yamaha motorcycles built on the 321 cc parallel-twin platform. This air filter is designed as a direct replacement for the stock paper air filter used on the Yamaha R3 and Yamaha MT-03. As stated on the official NGage product page and compatibility panel, this air filter is compatible with the following motorcycles: Yamaha R3 Yamaha MT-03 This listing covers these two models exactly as specified by the manufacturer. Designed for Yamaha R3 & Yamaha MT-03 NGage specifies this Hyper Flow Air Filter for Yamaha motorcycles built on the 321 cc platform. From the NGage product page: Suitable For: Yamaha R3 Yamaha MT-03 The filter is engineered to fit directly into the factory airbox of the above motorcycles without requiring cutting, trimming, or airbox modification. It is intended as a stock-replacement air filter element for routine service or intake performance upgrades. Hyper Flow Cotton Filter Construction NGage classifies the NGAGE-013YAR3 as a Hyper Flow Air Filter using a cotton-based filtering medium. From the product page and icon set: The filtering media is stated as 100% organic cotton The filter is described as washable and reusable The cotton media is supported by a molded rectangular filter frame to maintain structural shape inside the airbox The filter is designed for long-term reuse through periodic cleaning NGage does not publish micron ratings, pore size data, or laboratory filtration efficiency figures for this product. Airflow and Performance (Manufacturer-Stated) As per NGage’s official product page and feature icons, the NGage Hyper Flow Air Filter NGAGE-013YAR3 carries the following manufacturer-stated performance claims: Up to 30% increased air flow than stock filter Performance increase up to 2.2 BHP on wheels These airflow and performance figures are stated by NGage based on their internal testing and development data for this product. Reusable and Serviceable Design The NGage Hyper Flow Air Filter is designed to be washed, serviced, and reused. Unlike disposable paper air filters that are replaced at each service interval, this cotton-gauze filter is intended to be cleaned and reused periodically. From the product page: The filter is described as washable The filter is described as reusable The filter uses cotton as the filtering medium NGage does not specify a fixed cleaning interval.Service frequency will depend on: Riding environment Dust exposure Traffic and urban riding conditions Mileage covered Durability and Testing Claims From the product page and icon set, NGage states: Best durability Extensively tested on all terrains Hassle-free installation Eco-friendly product 100% organic cotton as filtering media These attributes are manufacturer-stated product characteristics as displayed on the NGage product page. Warranty Information (Manufacturer-Stated) From the NGage product page and feature icons: Replacement warranty: 100,000 kilometers NGage does not publish additional warranty terms or conditions on the product page. Warranty Note (RawTorque) RawTorque is an authorized reseller of NGage products and does not provide a separate warranty on this item. Any warranty coverage, replacement terms, or service claims are governed solely by NGage’s official warranty policy. RawTorque can assist customers in coordinating manufacturer warranty support where applicable. Manufacturing Origin From the NGage product page and artwork: Made in India Compatibility As per NGage’s official product page for part number NGAGE-013YAR3: Yamaha R3 Yamaha MT-03 Variant Explanation This listing is for: NGage Hyper Flow Air Filter Part Number: NGAGE-013YAR3 No alternate sizes, shapes, or engine-specific variants are shown or specified by NGage for this product. Specifications (Manufacturer-Verified Only) Brand: NGage Product Type: Hyper Flow Air Filter Part Number: NGAGE-013YAR3 Filter Media: 100% organic cotton Reusable: Yes Washable: Yes Installation Type: Direct replacement Application: Motorcycle air filter Compatibility: Yamaha R3, Yamaha MT-03 Manufacturing Origin: India Airflow Claim: Up to 30% increased airflow than stock filter Performance Claim: Up to 2.2 BHP increase on wheels Warranty: Replacement warranty up to 100,000 km Testing Claim: Extensively tested on all terrains Installation / Usage Notes Install only on Yamaha R3 and Yamaha MT-03 motorcycles. Designed to fit inside the factory airbox. Clean and reuse the filter periodically as required. Service frequency depends on riding conditions and dust exposure.

Read more less

NGage Hyper Flow Air Filter (NGAGE-014-YEZADV) for Yezdi Adventure & Scrambler – Washable Cotton Performance Replacement The NGage Hyper Flow Air Filter (NGAGE-014-YEZADV) is a reusable, washable cotton-gauze air filter developed specifically for Yezdi motorcycles built on the 334 cc platform. This air filter is designed as a direct replacement for the stock paper air filter used on the Yezdi Adventure and Yezdi Scrambler. As stated on NGage’s official product page and compatibility panel, this air filter is compatible with the following motorcycles: Yezdi Adventure Yezdi Scrambler This listing covers these two models exactly as specified by the manufacturer. Designed for Yezdi Adventure & Yezdi Scrambler NGage specifies this Hyper Flow Air Filter for Yezdi motorcycles built on the 334 cc platform. From the NGage product page: Suitable For: Yezdi Adventure Yezdi Scrambler The filter is engineered to fit directly into the factory airbox of the above motorcycles without requiring cutting, trimming, or airbox modification. It is intended as a stock-replacement air filter element for routine service or intake performance upgrades. Hyper Flow Cotton Filter Construction NGage classifies the NGAGE-014-YEZADV as a Hyper Flow Air Filter using a cotton-based filtering medium. From the product page and icon set: The filtering media is stated as 100% organic cotton The filter is described as washable and reusable The cotton media is supported by a molded filter frame to maintain structural shape inside the airbox The filter is designed for long-term reuse through periodic cleaning NGage does not publish micron ratings, pore size data, or laboratory filtration efficiency figures for this product. Airflow and Performance (Manufacturer-Stated) As per NGage’s official product material and feature icons, the NGage Hyper Flow Air Filter NGAGE-014-YEZADV carries the following manufacturer-stated performance claims: Up to 30% increased air flow than stock filter Performance increase up to 1.6 BHP on wheels These airflow and performance figures are stated by NGage based on their internal testing and development data for this product. Reusable and Serviceable Design The NGage Hyper Flow Air Filter is designed to be washed, serviced, and reused. Unlike disposable paper air filters that are replaced at each service interval, this cotton-gauze filter is intended to be cleaned and reused periodically. From the product page: The filter is described as washable The filter is described as reusable The filter uses cotton as the filtering medium NGage does not specify a fixed cleaning interval.Service frequency will depend on: Riding environment Dust exposure Terrain conditions Mileage covered Durability and Testing Claims From the product page and icon set, NGage states: Best durability Extensively tested on all terrains Hassle-free installation Eco-friendly product 100% organic cotton as filtering media These attributes are manufacturer-stated product characteristics as displayed on the NGage product page. Warranty Information (Manufacturer-Stated) From the NGage product page and feature icons: Replacement warranty: 100,000 kilometers NGage does not publish additional warranty terms or conditions on the product page. Warranty Note (RawTorque) RawTorque is an authorized reseller of NGage products and does not provide a separate warranty on this item. Any warranty coverage, replacement terms, or service claims are governed solely by NGage’s official warranty policy. RawTorque can assist customers in coordinating manufacturer warranty support where applicable. Manufacturing Origin From the NGage product artwork: Made in India Compatibility As per NGage’s official product page and compatibility panel for part number NGAGE-014-YEZADV: Yezdi Adventure Yezdi Scrambler Variant Explanation This listing is for: NGage Hyper Flow Air Filter Part Number: NGAGE-014-YEZADV No alternate sizes, shapes, or engine-specific variants are shown or specified by NGage for this product. Specifications (Manufacturer-Verified Only) Brand: NGage Product Type: Hyper Flow Air Filter Part Number: NGAGE-014-YEZADV Filter Media: 100% organic cotton Reusable: Yes Washable: Yes Installation Type: Direct replacement Application: Motorcycle air filter Compatibility: Yezdi Adventure, Yezdi Scrambler Manufacturing Origin: India Airflow Claim: Up to 30% increased airflow than stock filter Performance Claim: Up to 1.6 BHP increase on wheels Warranty: Replacement warranty up to 100,000 km Testing Claim: Extensively tested on all terrains Installation / Usage Notes Install only on Yezdi Adventure and Yezdi Scrambler motorcycles. Designed to fit inside the factory airbox. Clean and reuse the filter periodically as required. Service frequency depends on riding conditions and dust exposure.

Read more less

NGage Hyper Flow Air Filter (NGAGE-016BMW310) for BMW G 310 R / GS / RR & TVS Apache 310 RR – Washable Cotton Performance Replacement The NGage Hyper Flow Air Filter (NGAGE-016BMW310) is a reusable, washable cotton-gauze air filter developed for motorcycles built on the BMW–TVS 310 cc platform. This air filter is designed as a direct replacement for the stock paper air filter used on the BMW G 310 R, BMW G 310 GS, and TVS Apache 310 RR. As stated on NGage’s official product page and compatibility panel, this air filter is compatible with the following motorcycles: BMW G 310 R BMW G 310 GS TVS Apache 310 RR This listing covers these three models exactly as specified by the manufacturer. Designed for BMW G 310 R, G 310 GS & TVS Apache 310 RR NGage specifies this Hyper Flow Air Filter for motorcycles built on the BMW–TVS 310 cc platform. From the NGage product page: Suitable For: BMW 310 R BMW 310 GS BMW 310 RR TVS Apache 310 RR (Note: NGage’s compatibility panel lists “BMW 310 RR,” which refers to the BMW G 310 RR variant.) The filter is engineered to fit directly into the factory airbox of the above motorcycles without requiring cutting, trimming, or airbox modification. It is intended as a stock-replacement air filter element for routine service or intake performance upgrades. Hyper Flow Cotton Filter Construction NGage classifies the NGAGE-016BMW310 as a Hyper Flow Air Filter using a cotton-based filtering medium. From the product page and icon set: The filtering media is stated as 100% organic cotton The filter is described as washable and reusable The cotton media is supported by a molded rectangular filter frame to maintain structural shape inside the airbox The filter is designed for long-term reuse through periodic cleaning NGage does not publish micron ratings, pore size data, or laboratory filtration efficiency figures for this product. Airflow and Performance (Manufacturer-Stated) As per NGage’s official product page and feature icons, the NGage Hyper Flow Air Filter NGAGE-016BMW310 carries the following manufacturer-stated performance claims: Up to 30% increased air flow than stock filter Performance increase up to 0.5 BHP on wheels These airflow and performance figures are stated by NGage based on their internal testing and development data for this product. Reusable and Serviceable Design The NGage Hyper Flow Air Filter is designed to be washed, serviced, and reused. Unlike disposable paper air filters that are replaced at each service interval, this cotton-gauze filter is intended to be cleaned and reused periodically. From the product page: The filter is described as washable The filter is described as reusable The filter uses cotton as the filtering medium NGage does not specify a fixed cleaning interval.Service frequency will depend on: Riding environment Dust exposure Terrain conditions Mileage covered Durability and Testing Claims From the product page and icon set, NGage states: Best durability Extensively tested on all terrains Hassle-free installation Eco-friendly product 100% organic cotton as filtering media These attributes are manufacturer-stated product characteristics as displayed on the NGage product page. Warranty Information (Manufacturer-Stated) From the NGage product page and feature icons: Replacement warranty: 100,000 kilometers NGage does not publish additional warranty terms or conditions on the product page. Warranty Note (RawTorque) RawTorque is an authorized reseller of NGage products and does not provide a separate warranty on this item. Any warranty coverage, replacement terms, or service claims are governed solely by NGage’s official warranty policy. RawTorque can assist customers in coordinating manufacturer warranty support where applicable. Manufacturing Origin From the NGage product page and artwork: Made in India Compatibility As per NGage’s official product page and compatibility panel for part number NGAGE-016BMW310: BMW G 310 R BMW G 310 GS BMW G 310 RR TVS Apache 310 RR (The BMW G 310 RR appears in NGage’s compatibility panel as “BMW 310 RR.”) Variant Explanation This listing is for: NGage Hyper Flow Air Filter Part Number: NGAGE-016BMW310 No alternate sizes, shapes, or engine-specific variants are shown or specified by NGage for this product. Specifications  Brand: NGage Product Type: Hyper Flow Air Filter Part Number: NGAGE-016BMW310 Filter Media: 100% organic cotton Reusable: Yes Washable: Yes Installation Type: Direct replacement Application: Motorcycle air filter Compatibility: BMW G 310 R, BMW G 310 GS, BMW G 310 RR, TVS Apache 310 RR Manufacturing Origin: India Airflow Claim: Up to 30% increased airflow than stock filter Performance Claim: Up to 0.5 BHP increase on wheels Warranty: Replacement warranty up to 100,000 km Testing Claim: Extensively tested on all terrains Installation / Usage Notes Install only on BMW G 310 R, BMW G 310 GS, BMW G 310 RR, and TVS Apache 310 RR motorcycles. Designed to fit inside the factory airbox. Clean and reuse the filter periodically as required. Service frequency depends on riding conditions and dust exposure.

Read more less

NGage Hyper Flow Air Filter (NGAGE-018HIM450) for Royal Enfield Himalayan 450 & Guerrilla 450 The NGage Hyper Flow Air Filter (NGAGE-018HIM450) is a reusable, washable cotton-gauze air filter designed as a direct replacement for the stock paper air filter on Royal Enfield motorcycles built on the 450 cc Sherpa engine platform. According to NGage’s official product specification and master compatibility catalogue, this air filter is supplied as a single high-flow filter element suitable for both the Royal Enfield Himalayan 450 (Sherpa) and the Royal Enfield Guerrilla 450. This listing focuses on both models to maximize search visibility while remaining strictly aligned to the manufacturer’s official compatibility. Designed for Royal Enfield Himalayan 450 & Guerrilla 450 The NGage Hyper Flow Air Filter NGAGE-018HIM450 is designed to replace the factory paper air filter element in the airbox of motorcycles built on Royal Enfield’s 450 cc Sherpa engine platform. According to NGage’s master catalogue, the product is compatible with: Royal Enfield Himalayan 450 (Sherpa) Royal Enfield Guerrilla 450 This filter is engineered to fit directly into the stock airbox without modifications, making it suitable for routine maintenance or service-interval replacement. Cotton Gauze Filter Construction NGage classifies the NGAGE-018HIM450 as a Hyper Flow Air Filter that uses a multi-layer cotton gauze media. Cotton gauze filters are widely used in high-flow air filter applications because of their balance between airflow and dirt-trapping ability. The product artwork and official descriptions state that the filter: Uses cotton gauze media for airflow and filtration Is washable and reusable Comes pre-oiled (factory pre-oiled design) Is engineered for durability in variable terrain riding conditions Note that NGage does not publish official pore sizes, micron ratings, or detailed laboratory test results. Airflow and Performance Statements NGage’s product media for this filter includes a manufacturer-stated performance claim: Performance Increase Up To 1.0 BHP On Wheels (as shown in official product material) This statement is taken directly from NGage’s own listing and catalogue. No external or third-party validation data is provided. Washable and Reusable Design Unlike disposable paper filters, the NGage cotton gauze Hyper Flow Air Filter is designed to be washed, re-oiled, and reused. This reduces recurring replacement costs and makes the filter suitable for conditions where frequent servicing may be required. The filter should be cleaned and re-oiled periodically, with intervals depending on: Riding environment Dust and debris exposure Terrain conditions NGage includes optional air filter recharge oil as a purchasable accessory. Intended Function Air intake filters are critical in ensuring clean airflow into the engine while preventing dust, dirt, and other contaminants from entering the combustion chamber. The NGage Hyper Flow Air Filter is intended to: Maintain clean airflow Trap particulate contaminants Reduce potential wear inside the engine Facilitate consistent engine breathing relative to the stock filter No claims regarding fuel economy, emissions, or track-specific tuning are made beyond the manufacturer’s stated performance increase figure. Manufacturing Origin The NGage Hyper Flow Air Filter is manufactured in India, as shown on the product artwork. Compatibility As per NGage’s official master catalogue and product listing for part number NGAGE-018HIM450: Royal Enfield Himalayan 450 (Sherpa) Royal Enfield Guerrilla 450 Variants & Fitment This listing is for the NGage Hyper Flow Air Filter (NGAGE-018HIM450) only. No alternate media types, sizes, or additional variants are included unless specified by NGage. Specifications (Manufacturer-Verified Only) Brand: NGage Part Number: NGAGE-018HIM450 Product: Hyper Flow Air Filter Filter Media: Cotton gauze Washable and Reusable: Yes Direct Replacement for stock paper filters Suitable For: Royal Enfield Himalayan 450 & Guerrilla 450 Manufacturing Origin: India Manufacturer-Stated Performance Increase (Up To): 1.0 BHP on wheels Warranty / Testing Claims: As per product media Installation & Usage Notes Designed for direct installation in the stock airbox. Clean and re-oil periodically based on riding conditions. Follow manufacturer-recommended service intervals for filter maintenance.

Read more less

NGage Hyper Flow Air Filter (NGAGE-019TRI400) for Triumph Speed 400, Scrambler 400X & T4 – Washable Cotton Performance Replacement The NGage Hyper Flow Air Filter (NGAGE-019TRI400) is a reusable, washable cotton-gauze air filter developed specifically for Triumph motorcycles built on the 400 cc platform. This air filter is designed as a direct replacement for the stock paper air filter used on the Triumph Speed 400, Triumph Scrambler 400X, and Triumph T4. As stated on the official NGage product artwork, this air filter is compatible with the following motorcycles: Triumph Speed 400 Triumph Scrambler 400X Triumph T4 This listing covers these three models exactly as specified by the manufacturer. Designed for Triumph Speed 400, Scrambler 400X & T4 NGage specifies this Hyper Flow Air Filter for Triumph motorcycles built on the 400 cc platform. From the NGage product artwork: Fits: Speed 400 Scrambler 400X T4 The filter is engineered to fit directly into the factory airbox of the above motorcycles without requiring cutting, trimming, or airbox modification. It is intended as a stock-replacement air filter element for routine service or intake performance upgrades. Hyper Flow Cotton Filter Construction NGage classifies the NGAGE-019TRI400 as a Hyper Flow Air Filter using a cotton-based filtering medium. From the product artwork and icon set: The filtering media is stated as 100% organic cotton The filter is described as washable and reusable The cotton media is supported by a molded cylindrical filter body to maintain structural shape inside the airbox The filter is designed for long-term reuse through periodic cleaning NGage does not publish micron ratings, pore size data, or laboratory filtration efficiency figures for this product. Airflow and Performance (Manufacturer-Stated) As per NGage’s official product artwork and feature icons, the NGage Hyper Flow Air Filter NGAGE-019TRI400 carries the following manufacturer-stated performance claims: Up to 30% increased air flow than stock filter Performance increase up to 0.5 BHP on wheels These airflow and performance figures are stated by NGage based on their internal testing and development data for this product. Reusable and Serviceable Design The NGage Hyper Flow Air Filter is designed to be washed, serviced, and reused. Unlike disposable paper air filters that are replaced at each service interval, this cotton-gauze filter is intended to be cleaned and reused periodically. From the product artwork: The filter is described as washable The filter is described as reusable The filter uses cotton as the filtering medium NGage does not specify a fixed cleaning interval.Service frequency will depend on: Riding environment Dust exposure Terrain conditions Mileage covered Durability and Testing Claims From the product artwork and icon set, NGage states: Best durability Extensively tested on all terrains Hassle-free installation Eco-friendly product 100% organic cotton as filtering media These attributes are manufacturer-stated product characteristics as displayed on the NGage artwork. Warranty Information (Manufacturer-Stated) From the NGage product artwork and feature icons: Replacement warranty: 100,000 kilometers NGage does not publish additional warranty terms or conditions on the product artwork. Warranty Note (RawTorque) RawTorque is an authorized reseller of NGage products and does not provide a separate warranty on this item. Any warranty coverage, replacement terms, or service claims are governed solely by NGage’s official warranty policy. RawTorque can assist customers in coordinating manufacturer warranty support where applicable. Manufacturing Origin From the NGage product artwork: Made in India Compatibility As per the NGage product artwork for part number NGAGE-019TRI400: Triumph Speed 400 Triumph Scrambler 400X Triumph T4 Variant Explanation This listing is for: NGage Hyper Flow Air Filter Part Number: NGAGE-019TRI400 No alternate sizes, shapes, or engine-specific variants are shown or specified by NGage for this product. Specifications  Brand: NGage Product Type: Hyper Flow Air Filter Part Number: NGAGE-019TRI400 Filter Media: 100% organic cotton Reusable: Yes Washable: Yes Installation Type: Direct replacement Application: Motorcycle air filter Compatibility: Triumph Speed 400, Triumph Scrambler 400X, Triumph T4 Manufacturing Origin: India Airflow Claim: Up to 30% increased airflow than stock filter Performance Claim: Up to 0.5 BHP increase on wheels Warranty: Replacement warranty up to 100,000 km Testing Claim: Extensively tested on all terrains Installation / Usage Notes Install only on Triumph Speed 400, Scrambler 400X, and T4 motorcycles. Designed to fit inside the factory airbox. Clean and reuse the filter periodically as required. Service frequency depends on riding conditions and dust exposure.

Read more less

NGage Hyper Flow Air Filter (NGAGE-020KTMG3) for BS6 KTM Gen 3 Models – Washable Cotton Performance Replacement The NGage Hyper Flow Air Filter (NGAGE-020KTMG3) is a reusable, washable cotton-gauze air filter developed specifically for BS6 KTM motorcycles built on the Gen 3 platform. This air filter is designed as a direct replacement for the stock paper air filter used in KTM’s third-generation intake system. As stated on the official NGage product artwork, this air filter is compatible with “BS6 KTM all Gen 3 models.” NGage does not publish a model-wise compatibility breakdown (such as Duke, RC, or Adventure) for this part number. This listing therefore covers KTM motorcycles that fall under the BS6 Gen 3 platform, exactly as specified by the manufacturer. Designed for KTM BS6 Gen 3 Platform NGage specifies this Hyper Flow Air Filter for KTM motorcycles built on the Gen 3 platform. From the NGage product artwork: Fits: BS6 KTM all Gen 3 models No further segmentation by displacement or model family is provided by NGage for this part number. The filter is engineered to fit directly into the factory airbox of compatible KTM Gen 3 motorcycles without requiring cutting, trimming, or airbox modification. Hyper Flow Cotton Filter Construction NGage classifies the NGAGE-020KTMG3 as a Hyper Flow Air Filter that uses a cotton-based filtering medium. From the product artwork and icon set: The filtering media is stated as 100% organic cotton The filter is described as washable and reusable The cotton media is supported by a molded filter frame to maintain structural shape inside the airbox The filter is designed for long-term reuse through periodic cleaning NGage does not publish micron ratings, pore size data, or laboratory filtration efficiency figures for this product. Airflow and Performance (Manufacturer-Stated) As per NGage’s official product artwork and published product material, the NGage Hyper Flow Air Filter NGAGE-020KTMG3 carries the following manufacturer-stated performance claims: Up to 30% increased air flow than stock filter Performance increase up to 1.5 BHP on wheels These airflow and performance figures are stated by NGage based on their internal testing and development data for this product. Reusable and Serviceable Design The NGage Hyper Flow Air Filter is designed to be washed, serviced, and reused. Unlike disposable paper air filters that are replaced at each service interval, this cotton-gauze filter is intended to be cleaned and reused periodically. From the product artwork: The filter is described as washable The filter is described as reusable The filter uses cotton as the filtering medium NGage does not specify a fixed cleaning interval. Service frequency will depend on: Riding environment Dust exposure Terrain conditions Mileage covered Durability and Testing Claims From the product artwork and icon set, NGage states: Best durability Extensively tested on all terrains Hassle-free installation Eco-friendly product 100% organic cotton as filtering media These attributes are manufacturer-stated product characteristics as displayed on the NGage artwork. Warranty Information (Manufacturer-Stated) From the product artwork: Replacement warranty: 100,000 kilometers NGage does not publish additional warranty terms or conditions on the product artwork. Warranty Note (RawTorque) RawTorque is an authorized reseller of NGage products and does not provide a separate warranty on this item. Any warranty coverage, replacement terms, or service claims are governed solely by NGage’s official warranty policy. RawTorque can assist customers in coordinating manufacturer warranty support where applicable. Manufacturing Origin From the product artwork: Made in India Compatibility As per the NGage product artwork for part number NGAGE-020KTMG3: BS6 KTM motorcycles built on the Gen 3 platform (Artwork states: “Fits: BS6 KTM all Gen 3 models.”) NGage does not publish a model-wise compatibility breakdown (such as Duke, RC, or Adventure) for this part number. Variant Explanation This listing is for: NGage Hyper Flow Air Filter Part Number: NGAGE-020KTMG3 No alternate sizes, shapes, or Gen-specific variants are shown or specified on the NGage product artwork. Specifications  Brand: NGage Product Type: Hyper Flow Air Filter Part Number: NGAGE-020KTMG3 Filter Media: 100% organic cotton Reusable: Yes Washable: Yes Installation Type: Direct replacement Application: Motorcycle air filter Compatibility: BS6 KTM Gen 3 models Manufacturing Origin: India Airflow Claim: Up to 30% increased airflow than stock filter Performance Claim: Up to 1.5 BHP increase on wheels Warranty: Replacement warranty up to 100,000 km Testing Claim: Extensively tested on all terrains Installation / Usage Notes Install only on KTM motorcycles built on the BS6 Gen 3 platform. Designed to fit inside the factory airbox. Clean and reuse the filter periodically as required. Service frequency depends on riding conditions and dust exposure.

Read more less

NGage Hyper Flow Air Filter (NGAGE-022XPUL210) for Hero X-Pulse 210 4V (2025 Onwards) – Washable Cotton Performance Replacement The NGage Hyper Flow Air Filter (NGAGE-022XPUL210) is a reusable, washable cotton-gauze air filter developed specifically for the Hero X-Pulse 210 4V platform. This air filter is designed as a direct replacement for the stock paper air filter used on the Hero X-Pulse 210 4V (2025 onwards). As stated on the official NGage product artwork, this air filter is compatible with the following motorcycle: Hero X-Pulse 210 4V (2025 onwards) This listing covers this model exactly as specified by the manufacturer. Designed for Hero X-Pulse 210 4V (2025 Onwards) NGage specifies this Hyper Flow Air Filter for the Hero X-Pulse 210 4V platform introduced for the 2025 model year. From the NGage product artwork: Fits: Hero X-Pulse 210 – 4V (2025 onwards) The filter is engineered to fit directly into the factory airbox of the above motorcycle without requiring cutting, trimming, or airbox modification. It is intended as a stock-replacement air filter element for routine service or intake performance upgrades. Hyper Flow Cotton Filter Construction NGage classifies the NGAGE-022XPUL210 as a Hyper Flow Air Filter using a cotton-based filtering medium. From the product artwork and icon set: The filtering media is stated as 100% organic cotton The filter is described as washable and reusable The cotton media is supported by a molded rectangular filter frame to maintain structural shape inside the airbox The filter is designed for long-term reuse through periodic cleaning NGage does not publish micron ratings, pore size data, or laboratory filtration efficiency figures for this product. Airflow and Performance  As per NGage’s official product artwork and feature icons, the NGage Hyper Flow Air Filter NGAGE-022XPUL210 carries the following manufacturer-stated performance claims: Up to 30% increased air flow than stock filter Performance increase up to 0.8 BHP on wheels These airflow and performance figures are stated by NGage based on their internal testing and development data for this product. Reusable and Serviceable Design The NGage Hyper Flow Air Filter is designed to be washed, serviced, and reused. Unlike disposable paper air filters that are replaced at each service interval, this cotton-gauze filter is intended to be cleaned and reused periodically. From the product artwork: The filter is described as washable The filter is described as reusable The filter uses cotton as the filtering medium NGage does not specify a fixed cleaning interval.Service frequency will depend on: Riding environment Dust exposure Terrain conditions Mileage covered Durability and Testing Claims From the product artwork and icon set, NGage states: Best durability Extensively tested on all terrains Hassle-free installation Eco-friendly product 100% organic cotton as filtering media These attributes are manufacturer-stated product characteristics as displayed on the NGage artwork. Warranty Information (Manufacturer-Stated) Replacement warranty: 100,000 kilometers NGage does not publish additional warranty terms or conditions on the product artwork. Warranty Note (RawTorque) RawTorque is an authorized reseller of NGage products and does not provide a separate warranty on this item. Any warranty coverage, replacement terms, or service claims are governed solely by NGage’s official warranty policy. RawTorque can assist customers in coordinating manufacturer warranty support where applicable. Manufacturing Origin From the NGage product artwork: Made in India Compatibility As per the NGage product artwork for part number NGAGE-022XPUL210: Hero X-Pulse 210 4V (2025 onwards) Variant Explanation This listing is for: NGage Hyper Flow Air Filter Part Number: NGAGE-022XPUL210 No alternate sizes, shapes, or engine-specific variants are shown or specified by NGage for this product. Specifications  Brand: NGage Product Type: Hyper Flow Air Filter Part Number: NGAGE-022XPUL210 Filter Media: 100% organic cotton Reusable: Yes Washable: Yes Installation Type: Direct replacement Application: Motorcycle air filter Compatibility: Hero X-Pulse 210 4V (2025 onwards) Manufacturing Origin: India Airflow Claim: Up to 30% increased airflow than stock filter Performance Claim: Up to 0.8 BHP increase on wheels Warranty: Replacement warranty up to 100,000 km Testing Claim: Extensively tested on all terrains Installation / Usage Notes Install only on Hero X-Pulse 210 4V (2025 onwards) motorcycles. Designed to fit inside the factory airbox. Clean and reuse the filter periodically as required. Service frequency depends on riding conditions and dust exposure.

Read more less