Honda H'ness CB350 Accessories & Performance Parts

Precision-Built Iridium IX Spark Plug for Honda CB350 Platform The NGK CPR8EAIX-9 Iridium IX spark plug is specified for Honda’s 350cc platform, including the H’ness CB350 and CB350RS. Built with NGK’s fine-wire iridium electrode design, this plug is engineered to deliver consistent ignition performance under standard riding conditions. At the core is a 0.6 mm iridium centre electrode, designed to maintain stable spark characteristics across repeated heat cycles. Compared to conventional nickel plugs, iridium construction helps retain electrode shape over time, supporting consistent combustion behaviour during regular use. What This Means in Real Riding Conditions In practical terms, a stable spark contributes to: Smoother idle characteristics Cleaner combustion cycles Predictable throttle response These are not performance modifications, but refinements in how the engine operates within its designed parameters. Built for Daily Use, Not Just Specs Sheets The CB350 platform is known for refinement-focused riding. This plug aligns with that intent: Maintains ignition consistency in city traffic and touring conditions Designed to resist carbon fouling under normal usage Handles temperature variation during stop-go and highway riding It’s a reliability-focused component — not a tuning part. Specification-Driven Fitment This spark plug should only be used where CPR8EAIX-9 is specified by Honda. Confirmed Fitment: Honda H’ness CB350 Honda CB350RS Compatibility is strictly based on spark plug specification — not engine size similarity. 🔧 Additional Compatibility (Specification-Based) The NGK CPR8EAIX-9 spark plug is used across multiple motorcycles where this exact specification is required. Honda H’ness CB350 CB350RS Hornet 160R / Hornet 2.0 Unicorn 150 / 160 X-Blade CB Trigger SP Shine 125 Hero MotoCorp Xpulse 200 / 200T Xtreme 160R / 200S / 200R Impulse Bajaj Pulsar NS200 / RS200 / AS200 (Side Plug) Dominar 400 (Side Plug) Pulsar 150 / 180 / 220 TVS Raider 125 Jupiter / Zest / Wego Yamaha FZ V3 / FZS V3 Aprilia SR125 / SR160 / SXR160 Technical Highlights Fine-wire Iridium Centre Electrode (0.6 mm) Resistor Type Plug (EMI suppression) Heat Range: 8 Thread Diameter: 10 mm Thread Reach: 19 mm Hex Size: 16 mm Service & Usage Notes Sold as a single unit Install using correct torque specifications Replace as per manufacturer service interval Iridium plugs are designed for extended durability, but actual lifespan depends on: Fuel quality Riding conditions Engine health Summary The NGK CPR8EAIX-9 is a specification-correct iridium spark plug for Honda’s 350cc platform. It focuses on consistent ignition, durability, and stable combustion, aligning with the refinement characteristics of the CB350 engine.

Read more less

The N-Gage Hyper Flow Air Filter for Honda CB350 is a performance-oriented replacement air filter designed specifically for motorcycles built on Honda’s CB350 platform. This includes the Honda CB350, H’ness CB350, and CB350RS, all of which share similar intake architecture and engine characteristics. Air filtration plays a critical role in how an engine breathes, responds, and performs over time. On modern single-cylinder motorcycles, airflow consistency and effective dust filtration directly influence throttle smoothness, combustion stability, and long-term reliability. The N-Gage Hyper Flow Air Filter is designed to improve intake efficiency while continuing to protect the engine in everyday riding conditions. High-Flow Cotton Gauze Filtration Design This air filter is constructed using premium organic cotton gauze, layered to balance airflow and filtration efficiency. Cotton gauze filters are commonly used in performance applications because they allow increased air volume compared to disposable paper filters when properly maintained. The filter is factory pre-oiled, which helps capture fine dust particles while still allowing higher airflow through the intake system. This design supports smoother air delivery under varied riding conditions, including city traffic, highway cruising, and longer touring rides. Designed for Honda CB350 Engines The N-Gage Hyper Flow Air Filter is designed specifically for Honda’s CB350-series motorcycles. Fitment is based on the stock airbox used on the CB350, H’ness CB350, and CB350RS models. Because the filter matches factory mounting points and dimensions, it installs as a direct replacement. No cutting, drilling, or modification is required during installation. The original intake layout and sealing surfaces are retained, ensuring proper airbox integrity and weather protection. Throttle Response and Ride Behaviour Improved airflow can contribute to smoother throttle response and more predictable engine behaviour. Riders often choose high-flow air filters to reduce intake restriction, especially during acceleration and sustained cruising. As per manufacturer intent, the N-Gage Hyper Flow Air Filter is designed to work with the stock ECU and exhaust system. No tuning or remapping is required for installation under standard riding conditions. Actual riding feel may vary depending on riding style, fuel quality, maintenance, and overall engine condition. Washable and Reusable Construction Unlike disposable paper air filters that require periodic replacement, this air filter is washable and reusable. With proper cleaning and re-oiling using suitable filter maintenance products, the filter can be reused multiple times over its service life. This makes it a practical option for riders who prefer long-term ownership solutions and want to reduce recurring consumable replacements. Regular maintenance is essential to ensure consistent filtration performance and engine protection. Built for Indian Riding Conditions Honda CB350 motorcycles are commonly used across mixed riding environments. These include daily commuting, highway riding, and touring routes that may involve dust and changing weather. The N-Gage Hyper Flow Air Filter is designed to maintain consistent airflow and filtration across such conditions. Riders should adjust cleaning intervals based on riding environment, especially in dusty regions. Installation and Maintenance Installation follows the same process as replacing the stock air filter and does not require special tools. Riders should ensure the filter is seated correctly within the airbox and that sealing surfaces are clean during installation. For best results, cleaning and re-oiling should be carried out at recommended intervals using appropriate air filter cleaning products. Over-oiling or improper maintenance may affect filtration efficiency. Compatibility This air filter is compatible with the following motorcycles: Honda CB350 Honda H’ness CB350 Honda CB350RS Compatibility is based on stock intake configurations for these models. What’s Included The package includes one N-Gage Hyper Flow Air Filter, factory pre-oiled and ready for installation. Long-Term Ownership and Practical Use The N-Gage Hyper Flow Air Filter is intended for riders who prioritise consistent performance over long-term ownership rather than short-term gains. By maintaining stable airflow and effective filtration, the filter supports predictable engine behaviour across daily use and extended riding cycles. For motorcycles like the Honda CB350 series, which are often used for commuting, highway cruising, and touring, intake consistency plays an important role in engine smoothness and fuel delivery. A properly maintained air filter helps ensure that the intake system continues to function as designed over time. Riders are advised to inspect the filter periodically, especially when riding in dusty or humid conditions. Cleaning intervals may vary depending on usage and environment. When serviced correctly using suitable cleaning and re-oiling products, the filter can continue to deliver reliable intake performance without affecting the motorcycle’s original intake design.

Read more less

BMC FM01155 Air Filter for Honda H’ness CB350, CB350RS & CB350 (Oiled Cotton Performance Filter) The BMC FM01155 Air Filter is a direct replacement performance air filter designed for Honda’s 350cc platform, including the H’ness CB350, CB350RS, and newer CB350 variants. It installs inside the stock airbox, replacing the OEM filter without requiring any modification. Constructed using oiled cotton gauze, this panel-type air filter is engineered to support consistent airflow while maintaining effective filtration. The multi-layer cotton media allows controlled air intake while capturing fine contaminants, helping ensure stable engine operation across daily riding and long-distance touring conditions. BMC’s full moulding process creates a single-piece filter structure without welded joints, improving durability and eliminating structural weak points found in conventional filters. The filter is pre-oiled, washable, and reusable, making it a long-term replacement compared to disposable paper filters when maintained correctly. Construction & Design Panel-type OEM replacement filterOiled cotton gauze filtration mediaEpoxy-coated alloy mesh supportFull moulded single-piece constructionPre-oiled and ready for installation Compatibility Honda Honda CB350 (2025 onwards)Honda H’ness CB350 (2020 onwards)Honda H’ness CB350RS (2021 onwards)Honda H’ness CB350 DLX / DLX Pro (2022 onwards)Honda H’ness CB350 DLX / DS (2023 onwards) Specifications Brand: BMCModel: FM01155Filter Type: Panel Air FilterFilter Material: Oiled Cotton GauzeWashable: YesReusable: YesOEM Replacement: YesOuter Width: 88 mmOuter Length: 224 mm

Read more less

Bring refined throttle control and smoother ride quality to your Honda with the FuelX Lite Smart Autotune Module — a precision-engineered plug-and-play fueling optimizer developed by Race Dynamics. Built for riders who want improved rideability without diving into complex tuning, FuelX Lite intelligently adjusts the air-fuel ratio in real time to deliver a calmer, cooler, and more responsive motorcycle. Modern engines are calibrated lean from the factory to meet emission norms. While compliant, this often results in slight throttle hesitations, low-speed jerkiness, and additional engine heat. FuelX Lite addresses this at the source — optimizing fueling dynamically so your Honda feels smoother and more predictable across everyday riding conditions. What FuelX Lite Does FuelX Lite continuously monitors engine parameters and adjusts fueling within the closed-loop operating range. It works automatically — no map selection, no switches, no manual intervention. The system: • Improves throttle transition smoothness• Reduces low-RPM jerks• Enhances part-throttle rideability• Lowers engine and exhaust temperatures (up to ~10% under typical riding conditions)• Maintains factory reliability The result is not aggressive power spikes. It is refined, usable performance — especially noticeable in city traffic, slow riding, and steady cruising. Plug & Play Simplicity Installation is straightforward and completely reversible. • No wire cutting• No ECU flashing• No remapping• No specialized tools• Typical install time: ~15 minutes FuelX Lite connects using model-specific harnesses designed to integrate cleanly with Honda’s stock wiring. Your factory ECU remains untouched. This makes it ideal for riders who want better ride quality without permanent modification. Real-World Benefits Smoother Throttle FeelThrottle roll-on becomes more linear and predictable, reducing hesitation during gear shifts or low-speed riding. Reduced Engine HeatOptimized fueling helps manage combustion efficiency, which can reduce engine and exhaust temperatures in real-world conditions. Improved Ride ComfortLess jerkiness means easier traffic navigation and smoother long-distance cruising. Consistent Performance Across ConditionsAuto Adapt Technology responds to changes in altitude, air density, and temperature — making it suitable for touring and varied terrains. Built for Indian Riding Conditions FuelX Lite is engineered with durability in mind. • Automotive-grade internal components• Sealed, water-resistant connectors• Heat-resistant housing• Vibration-tolerant circuitry Designed and developed in India, it is tested for real-world riding environments — including heat, humidity, dust, and long-distance touring use. Compatibility Model-specific variants are available for popular Honda motorcycles, including: • Honda CB350RS• Honda H’ness CB350• Honda CB300R• Honda Hornet 2.0• Honda CB200X• Other compatible EFI Honda models (variant dependent) Always select the correct model option while purchasing to ensure proper harness compatibility. Who Is FuelX Lite For? FuelX Lite is ideal for: • Riders experiencing low-speed jerkiness• Daily commuters wanting smoother throttle feel• Touring riders seeking improved comfort• Owners installing mild intake or exhaust upgrades• Riders who want better rideability without map switching It is not a race-tuned ECU replacement. It is a refinement tool designed to improve how your motorcycle feels in everyday use. Technical Specifications Brand: FuelX (Race Dynamics)Model: FuelX LiteType: Smart Closed-Loop Fuel OptimizerInstallation: Plug & PlayMaps: Single Autotune Map (Automatic Adjustment)Country of Origin: India Important Notes • Designed to enhance rideability within the stock ECU framework.• Performance improvements vary based on motorcycle condition and setup.• Professional installation is recommended if unsure about fitment. Warranty & Authenticity This product is covered under the official FuelX manufacturer warranty as per their terms and conditions. RawTorque supplies only 100% genuine FuelX products sourced directly from authorized distributors. RawTorque does not provide independent warranty coverage beyond the manufacturer’s policy. For complete details, please refer to our Warranty Policy. If your Honda feels slightly hesitant, jerky at low speeds, or hotter than it should during daily use, FuelX Lite delivers a smarter, smoother riding experience — without altering your motorcycle’s core reliability.

Read more less

Unlock the real performance potential of your Honda with the PowerTRONIC V4 Piggyback ECU, engineered by Race Dynamics for riders who demand sharper throttle response, stronger mid-range torque, and refined power delivery without compromising engine reliability. This is not a cosmetic upgrade. It is a precision electronic tuning module that gives you calibrated control over fueling and ignition parameters — transforming how your motorcycle accelerates, responds, and performs across the rev range. Designed as a true plug-and-play system, the PowerTRONIC V4 installs without cutting factory wires or permanently modifying the stock ECU. Your original ECU remains intact while the V4 optimizes performance through intelligent signal control. What the PowerTRONIC V4 Actually Does Modern motorcycles are factory-tuned conservatively to meet emission regulations and broad global operating conditions. This often results in lean fueling, restricted ignition timing, and slightly muted throttle response. PowerTRONIC V4 addresses this by: • Optimizing air-fuel ratio• Adjusting ignition timing• Improving throttle signal interpretation• Refining power delivery across RPM bands The result is noticeably smoother acceleration, stronger pull in mid-range RPMs, and more immediate throttle feedback. You don’t get unpredictable spikes. You get controlled, usable performance. Real-World Performance Benefits Sharper Throttle ResponseThrottle roll-ons feel immediate and precise, especially during overtakes or aggressive riding. Improved Torque DeliveryMid-range torque becomes more accessible, reducing the need for frequent downshifts. Smoother Power CurveAcceleration feels linear and progressive instead of flat or jerky. Reduced HesitationImproves throttle transitions during gear shifts and part-throttle riding. Whether you're riding in city traffic, on highways, or during spirited weekend rides, the improvement is instantly noticeable. Dual Pre-Tuned Performance Maps The PowerTRONIC V4 comes preloaded with dual maps calibrated for your specific Honda model. Riders can switch between maps depending on riding preference or setup (stock exhaust vs aftermarket, for example). For advanced users, maps can be: • Customized• Edited• Uploaded via PC, smartphone, or tablet• Fine-tuned through PowerTRONIC Control Center software This flexibility makes it suitable for both everyday riders and serious tuners. Plug & Play Installation Installation is straightforward and reversible. • No wire cutting• No ECU flashing• No permanent modifications• Typical install time: ~40 minutes It connects using model-specific harnesses designed to integrate cleanly with Honda’s factory wiring system. Built for Indian Riding Conditions PowerTRONIC V4 is engineered in India and tested for real-world heat, humidity, dust, and vibration. It features: • Automotive-grade internal components• Sealed connectors• Water-resistant construction• Heat-resistant housing• Vibration-proof circuitry This is designed for long-term reliability, not temporary gains. Compatible Honda Models Model-specific variants are available for: • Honda CB350RS• Honda H’ness CB350• Honda CB300R• Honda Hornet 2.0• Honda CB200X• Other compatible EFI Honda models (variant-dependent) Always select the correct model option while purchasing. Who Is This For? The PowerTRONIC V4 is ideal for: • Riders seeking sharper throttle feel• Owners installing aftermarket exhausts• Touring riders wanting smoother mid-range torque• Enthusiasts looking for more engaging performance• Tuners who want full fueling control It is not a random power booster. It is a controlled, precision performance upgrade. Technical Overview Brand: PowerTRONIC (Race Dynamics)Model: V4 Piggyback ECUFunction: Fuel + Ignition OptimizationInstallation: Plug & PlayMap Support: Dual Preloaded Maps + Custom Map CapabilityTuning Access: PC / Smartphone / TabletCountry of Origin: India Important Notes • Professional installation is recommended for optimal setup.• Performance gains may vary depending on motorcycle condition and modifications.• Designed to work with stock or compatible aftermarket setups (model-specific). Warranty & Authenticity This product is covered under the official PowerTRONIC manufacturer warranty as per Race Dynamics’ terms and conditions. RawTorque supplies only 100% genuine PowerTRONIC ECUs sourced directly from authorized distributors. RawTorque does not provide independent warranty coverage beyond the manufacturer’s policy. For full coverage details, please refer to our Warranty Policy. If you want your Honda to feel sharper, more responsive, and mechanically alive without compromising factory reliability, the PowerTRONIC V4 delivers controlled performance — not gimmicks, not noise, just calibrated power where it matters.

Read more less

Upgrade your Honda motorcycle’s performance with the FuelX Pro+, a next-generation Smart Autotune Module engineered to optimize throttle response, reduce jerks, and enhance rideability. Designed to deliver smooth power delivery and adaptive tuning, FuelX Pro+ automatically adjusts fuel mapping based on real-world conditions — ensuring peak performance across terrains, climates, and altitudes. Built with 10 Autotune Maps, a Handlebar Map Switch, and Auto Adapt Technology, the FuelX Pro+ lets you switch between maps instantly — allowing your bike to adapt to your riding style on the go. Each module is plug-and-play, requiring no complex setup or ECU flashing. Crafted from automotive-grade components, the FuelX Pro+ is water and heat resistant, built to withstand the harshest riding conditions. 🧠 Key Highlights ✅ Plug & Play installation (no cutting or splicing required) 🔁 10 Autotune Maps – Adjust fuel trims for any condition 🕹️ Handlebar Map Switch for on-road tuning control 🧠 Auto Adapt technology for real-time engine optimization 💧 Water & Heat Resistant – built to last in all conditions ⚙️ Constructed from premium automotive-grade components 🧾 Specifications Brand: FuelX / Race Dynamics Model: Pro+ Compatibility: Honda Motorcycles  Installation Time: ~15 minutes Warranty: Covered under the official manufacturer’s 2-year limited warranty (as per brand terms).RawTorque facilitates all warranty claims directly with the authorized FuelX support network.For full details, please refer to our Warranty Policy.

Read more less

Legundary Universal Backrest – Multi-Bike Touring Comfort Upgrade Long rides change the conversation. What feels fine for 20 minutes starts to feel different after 200 kilometers. The Legundary Universal Backrest is engineered to solve a simple but critical touring problem — pillion fatigue. Designed to fit multiple motorcycles including the Royal Enfield Himalayan 450, Honda H'ness CB350, Honda CB200X, and Suzuki V-Strom SX, this backrest delivers structured lumbar support without disturbing your bike’s original stance. This is not an oversized touring throne. It is a controlled, compact comfort solution. Engineered for Real-World Touring Pillion comfort directly affects ride quality. Without proper back support, passengers tend to: Shift weight unpredictably Brace harder under acceleration Experience lower-back fatigue Feel unstable on uneven terrain Over long distances, this leads to discomfort and frequent stops. The Legundary Universal Backrest addresses that with a structured arched cushion profile designed to support the lower lumbar zone naturally. The curvature isn’t cosmetic — it follows ergonomic principles that reduce pressure concentration and promote better posture. Comfort is mechanical. Not emotional. Balanced Construction: Strength + Comfort The structural frame is built from mild steel. This material is chosen for its durability under vibration and load stress. Touring motorcycles experience: Continuous road vibration Sudden braking loads Acceleration shifts Uneven terrain shock The steel frame maintains rigidity under these forces, ensuring the backrest does not flex or loosen over time. At the contact surface, premium rexine upholstery wraps around a medium-density foam cushion. The foam density is calibrated carefully: Too soft → collapses under weightToo hard → causes discomfort on long rides Medium-density foam offers support without feeling rigid. It absorbs micro-vibrations while maintaining structure during extended highway runs. The result is controlled comfort — not a cushion that deforms after a few months. Universal Mounting, Clean Integration Despite being universal, this backrest is designed to maintain visual discipline. It does not look like an aftermarket afterthought. The mounting system allows: Direct bolt-on installation No drilling or frame cutting No permanent modification Easy removal if required Because it is designed to fit multiple touring and adventure motorcycles, the bracket geometry allows adaptable positioning while maintaining structural stability. It integrates cleanly with stock rear grab rails and luggage setups. Designed to Complement, Not Overpower Oversized backrests can disrupt motorcycle proportions. This unit maintains: Compact footprint Balanced rear profile Factory-aligned visual language On adventure motorcycles like the Himalayan 450 or V-Strom SX, it preserves the rugged aesthetic. On modern roadsters like the H’ness CB350, it blends without looking bulky. Function first. Styling second. Harmony always. Built for Long-Term Use The mild steel structure is finished with a corrosion-resistant coating to withstand: Rain exposure Humidity Dust accumulation Daily commuting wear The rexine upholstery resists weather cracking and surface degradation better than untreated fabric materials. This is built for riders who tour consistently, not occasionally. Who This Upgrade Is For This backrest is ideal for riders who: Frequently travel two-up Tour long distances Prioritize pillion stability Want comfort without visual bulk Prefer bolt-on reliability If you ride solo most of the time, you may not need it. If you carry a passenger often, this becomes a structural comfort upgrade — not a cosmetic one. Key Features Universal fit for multiple touring motorcycles Mild steel structural frame Premium rexine upholstery Medium-density ergonomic foam Compact, arched lumbar design Corrosion-resistant finish Direct bolt-on installation Designed for touring stability Construction Overview Frame Material: Mild SteelCushion Material: Rexine + Medium-Density FoamFinish: Corrosion-Resistant CoatingFitment: Universal (Compatible with listed motorcycles)Installation: Direct Bolt-On Why This Upgrade Makes Mechanical Sense Passenger stability improves overall ride dynamics. Reduced pillion fatigue reduces constant shifting. Balanced lumbar support improves posture and long-distance comfort. Adventure and touring motorcycles are built for distance. Comfort determines how far you can realistically travel. This backrest strengthens the touring capability of your machine without altering its character. Warranty This product is manufactured by Legundary Custom Builds (LCB) and includes a 6-month manufacturer warranty against material or manufacturing defects. RawTorque does not provide independent warranties beyond the manufacturer’s coverage. Refer to your Warranty Policy for full details.

Read more less

The NGage HB 089 and HBS 089 front brake pads are engineered for Honda’s CB 350 platform, covering the CB 350 H’ness, CB 350RS, and CB 350. These pads are designed to match the front brake caliper dimensions and mounting profile required for these motorcycles, ensuring direct fitment without modification. This listing is for the front brake position only. Rear brake pads are listed separately under a different product code. NGage offers this pad shape in two distinct friction materials—Whisker Ceramic and Sintered—allowing riders to select the compound that best aligns with their riding style, usage pattern, and braking preference. Friction Material Options (Variants) HB 089 — Whisker Ceramic Brake PadsThis variant uses NGage’s whisker-reinforced ceramic compound, designed to deliver progressive braking feel, consistent modulation, and stable performance under everyday riding conditions. The ceramic matrix is optimized for controlled heat behavior and smooth engagement, making it well-suited for city riding, touring, and highway use. HBS 089 — Sintered Brake PadsThis variant uses a metallic sintered friction compound formed under high temperature and pressure. It is engineered for higher thermal stability and strong bite under demanding braking conditions. The sintered formulation is suitable for aggressive riding, high-load usage, and situations where consistent braking performance is required at elevated temperatures. Both variants share the same physical shape, thickness, and mounting profile. Only the friction compound differs. Compatibility — Front Brake Only Honda CB 350 H’nessHonda CB 350RSHonda CB 350 This listing applies strictly to the front brake caliper of the above models. Technical Overview Brand: NGageProduct Type: Motorcycle Disc Brake PadsPosition: FrontPad Codes: HB 089 (Whisker Ceramic), HBS 089 (Sintered)Material Options: Ceramic-based or Sintered metallicCertification: ARAI Tested Manufacturing Origin: Japan  Installation & Use Notes • Designed for direct replacement in the stock front caliper• No modification required when installed on compatible models• Follow standard brake pad bedding-in procedures after installation• Professional installation recommended for optimal braking performance• Always replace brake pads as a complete axle set

Read more less

The Rolon Brass Chain & Sprocket Kit is expertly crafted for riders who demand excellent durability, smooth power transfer, and extended service life specifically for the Honda H’ness CB350 and CB350RS motorcycles. This premium kit stands out as a top choice to enhance your bike's overall performance while ensuring reliable operation on every ride. The meticulous design ensures that every component works in harmony with your motorcycle's drivetrain system. This complete kit features a brass-coated roller chain that is engineered to significantly reduce friction and improve corrosion resistance. The brass coating maintains consistent lubrication under various riding conditions, making sure the chain performs at its best. The Rolon Brass Chain extends the lifespan of both the chain and sprockets, making it an ideal option for riders who frequently cover long distances or encounter stop-and-go traffic. The sprockets included in the kit are precision-machined to perfectly match OEM tooth profiles. This precision ensures flawless chain engagement and evenly distributes load across the drivetrain. When combined as a set, the sprockets and brass chain provide smoother acceleration, lower drivetrain noise, and longer lasting performance. These qualities remain effective whether you're navigating city streets or cruising on highways. Rolon Brass Chain: Fitment & Compatibility This Rolon Brass Chain and sprocket kit is compatible with motorcycles using factory-standard sprocket sizes. It is crucial to confirm your current sprocket tooth count before installation, especially if your motorcycle has undergone any previous modifications. Proper fitment guarantees optimal performance and safety. Compatible with Honda H’ness CB350 Compatible with Honda CB350RS The Rolon Brass Chain is an ideal fit for these specific Honda models. It maintains factory gearing characteristics, allowing riders to upgrade to a more durable chain without sacrificing performance or smooth power delivery. Specifications of the Rolon Brass Chain Kit Brand: Rolon Product Type: Chain & Sprocket Kit Chain Type: Brass-coated roller chain Chain Size: 520 Chain Links: 104 Links Front Sprocket: 14 Teeth Rear Sprocket: 41 Teeth Material (Chain): High-strength steel with brass coating Material (Sprockets): Hardened steel Finish: Brass (chain), black steel sprockets Installation Type: Direct replacement Country of Origin: India Installation Instructions The kit serves as a direct replacement for the stock chain and sprockets on your Honda H’ness CB350 or CB350RS. To ensure optimal performance and safety, professional installation is highly recommended. Proper chain tension, precise sprocket alignment, and correct torque settings are critical for excellent drivetrain function and rider safety. Why Choose the Rolon Brass Chain Kit? The Rolon Brass Chain is well-known for its tough brass coating that substantially reduces wear on your motorcycle’s drivetrain components. The brass finish provides outstanding resistance to rust and corrosion. This leads to a longer-lasting chain compared to standard steel options. Such durability means fewer replacements and smoother rides on diverse road surfaces and weather conditions. In addition to the brass-coated chain, the kit includes sprockets with a superior hardened steel finish. This ensures that the entire transmission setup works seamlessly. The result is sustained power delivery even in demanding riding environments. Installing a quality chain guard is also advisable. A chain guard protects the chain from debris, enhancing safety and prolonging the effective life of the drivetrain components. What’s Included in the Rolon Brass Chain & Sprocket Kit? 1 × Rolon brass-coated chain (104 links) 1 × Front sprocket (14 Teeth) 1 × Rear sprocket (41 Teeth) This kit provides you with everything needed for a comprehensive drivetrain upgrade or replacement on compatible Honda models. The Rolon Brass Chain guarantees excellent cohesion with the sprockets. This cohesion promotes balanced wear and reliable performance over time. Additional Benefits of Brass Coating The brass material on the chain significantly improves its ability to retain lubrication. This reduces internal friction and heat build-up within the chain links and rollers. These effects extend the component life and contribute to quieter operation of the drivetrain. Riders will appreciate smoother power shifts along with noticeably reduced noise during acceleration and cruising. Choosing the right chain guard can further protect your Rolon Brass Chain from exposure to environmental contaminants like dirt and water. This protection prolongs the effective lifespan of your drivetrain components by minimizing abrasive and corrosive contact. Such maintenance-friendly features make the Rolon kit an excellent choice for riders prioritizing reliability and durability.

Read more less

The NGage HB 150 and HBS 150 rear brake pads are designed for Honda’s CB 350 platform, covering the CB 350 H’ness, CB 350RS, and CB 350. These pads are shaped to match the rear brake caliper profile used on these motorcycles, ensuring correct fitment and proper contact with the brake disc. This listing is for the rear brake position only. Front brake pads for these models are listed separately under a different pad code. NGage offers this pad shape in two friction material options—Whisker Ceramic and Sintered—allowing riders to select the compound that best suits their braking preference, riding style, and operating conditions. Friction Material Options (Variants) HB 150 — Whisker Ceramic Brake PadsThis variant uses NGage’s whisker-reinforced ceramic compound, engineered for smooth braking response and controlled modulation. The ceramic matrix is tuned for stable everyday performance, making it suitable for urban riding, highway use, and touring where predictable rear brake feel is preferred. HBS 150 — Sintered Brake PadsThis variant uses a metallic sintered friction compound formed under high temperature and pressure. It is built for higher thermal stability and stronger bite under demanding braking conditions. The sintered formulation is suited for riders who load the rear brake more aggressively or ride in conditions that generate higher brake temperatures. Both variants share the same physical dimensions and mounting geometry. Only the friction compound differs. Compatibility — Rear Brake Only Honda CB 350 H’nessHonda CB 350RSHonda CB 350 This listing applies strictly to the rear brake caliper of the above models. Technical Overview Brand: NGageProduct Type: Motorcycle Disc Brake PadsPosition: RearPad Codes: HB 150 (Whisker Ceramic), HBS 150 (Sintered)Material Options: Ceramic-based or Sintered metallicCertification: ARAI Tested (as indicated by NGage)Manufacturing Origin: Japan (as indicated by NGage) Installation & Use Notes • Designed for direct replacement in the stock rear caliper• No modification required when installed on compatible models• Follow standard brake pad bedding-in procedures after installation• Professional installation recommended for consistent braking performance• Always replace brake pads as a complete axle set where applicable

Read more less

The Red Rooster Pegasus Exhaust for Honda H’ness CB350 is built for riders who want more than just a cosmetic upgrade. It is engineered to refine the character of the H’ness—adding depth to the exhaust note, improving throttle feel, and enhancing overall ride response without compromising reliability or daily usability. Constructed from Grade 304 stainless steel, the Pegasus is designed to withstand real-world riding conditions. From heat cycles in city traffic to long highway stretches under load, the material resists corrosion, discoloration, and structural fatigue. The stainless construction also allows better thermal stability, which plays a key role in maintaining consistent exhaust tone and performance over time. This is not a thin decorative canister—it is a properly engineered performance component tuned specifically for the CB350 platform. Internally, the Pegasus uses ceramic-wool insulation to regulate heat dispersion and stabilize sound output. This insulation layer helps maintain exhaust gas velocity while preventing excessive resonance or harshness. The result is a rich, throaty tone that feels mature and mechanical rather than loud for the sake of volume. It complements the long-stroke character of the H’ness engine, adding depth without overwhelming refinement. Throttle response becomes noticeably sharper. Mid-range torque delivery feels cleaner and more linear, particularly during overtakes or rolling acceleration in higher gears. The Pegasus improves exhaust flow efficiency, helping the engine breathe more freely while maintaining usable rideability across the rev range. Instead of chasing peak numbers, the system focuses on real-world ride feel—smoother roll-on response, steadier cruising tone, and improved consistency during long rides. Weight reduction over the stock exhaust contributes to a more responsive handling experience. The CB350 retains its stability, but gains a slightly livelier character during corner entry and low-speed maneuvering. For riders who commute daily and tour occasionally, this translates into less fatigue and more confidence in mixed riding environments. Fitment is designed as a true bolt-on system. There is no requirement for fuel remapping, ECU changes, wiring modifications, or fabrication. The Pegasus mounts directly using factory attachment points, ensuring correct alignment and structural integrity. Installation remains straightforward while preserving the original mounting geometry of the bike. The Pegasus is available in Polish and Black finishes, each offering a distinct aesthetic appeal: Polished Finish provides a clean metallic look that highlights the stainless-steel construction. It pairs well with chrome accents and classic styling cues of the H’ness CB350. Black Finish offers a more understated, stealth-oriented appearance with a heat-resistant coating that maintains durability under prolonged use. Both finishes are engineered for longevity, resisting rust, surface degradation, and discoloration from heat exposure. The visual upgrade complements the motorcycle’s retro-modern styling without overpowering its identity. Sound tuning remains one of the strongest characteristics of the Pegasus. At idle, it produces a controlled, bass-heavy pulse that enhances presence without excessive sharpness. Under acceleration, the note deepens progressively, maintaining tonal clarity rather than turning hollow or metallic. On highways, the sound settles into a stable frequency band that minimizes fatigue during extended cruising. For riders who value mechanical authenticity over unnecessary noise, the Pegasus strikes a balanced tone. It enhances the CB350’s voice without distorting its personality. Durability remains central to the design philosophy. Every weld, bend, and contour is manufactured to endure vibration, thermal expansion, and extended usage. The system is built not only for aesthetic improvement, but for long-term ownership confidence. Whether used for urban commuting, weekend highway runs, or occasional touring, the Pegasus integrates seamlessly into the riding experience. It improves response, refines tone, and reinforces durability—all while preserving the reliability of the Honda H’ness CB350 platform. This is not a decorative accessory. It is a structured performance enhancement engineered for riders who appreciate balance—sound without harshness, performance without compromise, and styling without excess.

Read more less

Honda Hness CB350 Saddlestay – Legundary Mild Steel Black with Jerry Can Mount Product Description The Honda Hness CB350 Saddlestay from Legundary is designed specifically for the Honda Hness CB350. This saddlestay provides structured support for mounting saddle bags while maintaining spacing from the motorcycle’s rear section. Constructed from mild steel and finished in jet black, this unit is built as a rigid side support system. The design follows a 3-point mounting structure, offering stable positioning when luggage is installed. The layout is intended to help keep saddle bags in place and reduce contact with other motorcycle parts. The Honda Hness CB350 Saddlestay also includes provision for an inbuilt jerry can mounting option, allowing additional utility alongside saddle bag installation. The structure is designed to hold luggage securely for regular riding and touring applications. This is a model-specific fitment product developed for the Honda Hness CB350 platform. Warranty Disclaimer This product includes manufacturer warranty coverage, if applicable, provided solely by the brand. Rawtorque does not provide any additional warranty coverage beyond the manufacturer’s policy. Please refer to our Warranty Policy for complete terms and conditions. Specifications Brand: Legundary Product Type: Saddlestay Motorcycle Compatibility: Honda Hness CB350 Material: Mild Steel Finish: Jet Black Mounting Type: 3-Point Mounting Jerry Can Mount: Inbuilt Provision

Read more less

Honda Hness CB350 Thanos Crashguard with Slider – Legundary Mild Steel Black Product Description The Honda Hness CB350 Thanos Crashguard with Slider from Legundary is designed for the Honda Hness CB350. This crashguard setup includes integrated side sliders and is positioned as a structural protection accessory for the motorcycle. Constructed from mild steel and finished in black, the unit follows a rigid frame design. The slider protrudes outward from the guard structure and is intended to create spacing between the motorcycle body and the ground surface during impact scenarios. The Honda Hness CB350 Thanos Crashguard with Slider measures 45 x 18 x 12 (L x B x H) cm and has a listed weight of 1.950 kg. The product is described as corrosion resistant and is developed specifically for the Honda Hness CB350 platform. For riders seeking a model-specific crash protection setup with integrated sliders for the Honda Hness CB350, this Legundary Thanos Crashguard with Slider offers a direct-fit mild steel solution. Specifications Brand: Legundary Product Type: Crashguard with Slider Motorcycle Compatibility: Honda Hness CB350 Material: Mild Steel Finish: Black Dimensions: 45 x 18 x 12 cm (L x B x H) Weight: 1.950 kg Warranty: 6 Months Manufacturer Warranty Warranty Disclaimer This product includes a manufacturer warranty provided solely by the brand. Rawtorque does not provide any additional warranty coverage beyond the manufacturer’s policy. Please refer to our Warranty Policy for complete terms and conditions.

Read more less