Products

Control Your Exhaust. On Your Terms. Your valved exhaust has two modes — you just haven't been able to use both. The Valvetronic Exhaust Valve Control Module (Manual) gives you a handlebar-mounted switch that physically opens or closes the exhaust butterfly valve whenever you want. Full roar on the open highway. Clean and quiet through the colony, toll booth, or early morning streets. No apps. No wiring. No compromise. This is the most reliable way to control a valved exhaust — because there's nothing electronic to fail. A cable connects your thumb to the valve. That's it. What This Module Does Valved exhausts come with an internal butterfly valve that changes how exhaust gases flow. When the valve is closed, gases pass through a baffled internal route — quieter, more refined. When the valve is open, gases take the free-flow path — louder, rawer, with a more aggressive exhaust note. Most valved exhausts ship without any control module. The valve stays fixed in one position. This module gives you a switch to change it, whenever you want, from the handlebar. Closed valve: Quiet, compliant, neighbour-friendly. Use it in residential areas, at idle, in traffic, on early morning rides. Open valve: The sound your exhaust was built to make. Use it on highways, open roads, or anywhere you want the full character of your exhaust to come through. Why Manual Over Electric Zero electronics. No solenoid, no servo, no wiring loom, no relay. Nothing to short, corrode, or fail over time. Works anywhere, always. The valve opens when you pull the cable. No power required. No sensor needed. Doesn't care if your bike is warm, cold, or idling. You're in control. The valve is exactly where you put it — open or closed — until you choose to change it. No automatic switching when you don't want it. Simple to install. Route the cable, connect to the valve actuator, mount the switch. No ECU tapping, no wiring diagrams, no calibration. Built to last. A cable and a switch outlast any electronic actuator on a motorcycle. Less to maintain, less to replace. How It Works A control switch mounts on your handlebar. A cable runs from the switch down to the butterfly valve actuator on your exhaust. When you flick the switch, cable tension physically rotates the valve between open and closed. The entire system is mechanical — no power draw from your bike's electrical system, no ECU communication, no mapping required. Installation requires routing the cable cleanly along the frame to the exhaust, connecting to the existing valve actuator arm, and adjusting cable tension for full travel in both directions. A standard workshop should be able to install this in under an hour on most platforms. Compatible Bikes This is a universal module — it works with any valved exhaust system that supports mechanical cable actuation, regardless of bike brand or model. Below is a verified compatibility reference across popular Indian market platforms. If your bike has a valved slip-on, this module can control it. Royal Enfield Interceptor 650 / Continental GT 650 / Classic 650 / Bear 650 Classic 350 (Reborn) / Hunter 350 / Meteor 350 Himalayan 411 / Himalayan 450 / Guerrilla 450 Scram 411 / Super Meteor 650 / Shotgun 650 KTM Duke 125 / Duke 200 / Duke 250 / Duke 390 RC 125 / RC 200 / RC 390 Adventure 250 / Adventure 390 / Adventure 390 (2025) 790 Adventure Triumph Speed 400 / Scrambler 400 X / Tiger 400 Street Triple 675 / Speed T4 Bonneville T100 / T120 / Street Twin Tiger 800 / Street Scrambler 900 Yamaha MT-15 V2 / R15 V3 / R15 V4 FZ25 / FZS25 / Fazer 25 MT-03 / R3 YZF-R1 / YZF-R6 / MT-07 Kawasaki Ninja 400 / Ninja 650 / Ninja 1000 SX Z800 / Z900 / Z900 (2026) Versys 650 / Versys-X 300 / Versys 1000 Honda CB200X / CB350 Highness / CB350RS CBR 250R / CB300R / CB300F CBR 650R / CBR 650F / CB Hornet 160R Africa Twin / NX200 Bajaj Pulsar NS200 / RS200 / AS200 / 220F Dominar 250 / Dominar 400 NS 400Z TVS Apache RR 310 / Apache RTR 200 4V Ronin BMW G 310 R / G 310 GS / G 310 RR S 1000 R / S 1000 XR / R 1000 GS Suzuki Gixxer 250 / V-Strom 250SX / V-Strom 650 GSX-R750 / GSX-S750 / GSX-R1000 Hayabusa (2021 Onwards) Ducati Scrambler 800 / Scrambler 1100 Monster 797 / Monster 1200 Hypermotard 939 / Multistrada 950 Streetfighter V4 Harley Davidson Street 750 / Street Rod X440 / X440T Forty Eight / Iron 883 Jawa / Yezdi Jawa 42 FJ / Jawa Perak Yezdi Adventure / Yezdi Roadster Hero Karizma XMR / Xpulse 200 4V / Xpulse 210 Benelli TRK 502 / TRK 502X / TNT 600i / TNT 899 This module is universal — it controls the valve mechanism, not the exhaust itself. Your exhaust must have a butterfly valve with a mechanical actuator arm. Confirm exhaust compatibility before ordering. If your bike model isn't listed but runs a valved slip-on, this module will work. What's in the Box 1 × Valvetronic Manual Control Switch (handlebar mount) 1 × Control cable assembly Mounting hardware Exhaust system not included. Module requires a compatible valved exhaust to function. Specifications Control Type: Manual (mechanical cable) Actuation: Direct cable-pull butterfly valve operation Power Required: None ECU / Wiring Integration: Not required Valve Positions: Open / Closed (user-operated) Mount: Handlebar switch with cable routing Fitment: Universal — compatible with mechanically-actuated valved exhausts Brand: Valvetronic MRP: ₹3,499 Also Available Want automatic valve switching based on RPM and throttle input? The Valvetronic Electric (Automatic) Module does exactly that — the valve opens and closes on its own as you ride. View the Electric Module →

Read more less

Vesrah Ceramic Brake Pads for Ather 450X Electric Scooter Product Description The Vesrah Ceramic Brake Pads for Ather 450X are designed as direct replacement brake pads for the Ather electric scooter platform. Manufactured in Japan, these brake pads use a ceramic composite compound engineered to provide smooth braking performance, reduced brake dust, and stable stopping response. This listing allows riders to purchase either the front or rear brake pad set depending on their replacement requirement. The front brake pads use Vesrah pad code SD-947, while the rear brake pads use Vesrah pad code SD-953. Both compounds are designed for consistent braking feel and predictable stopping performance during everyday riding conditions. Ceramic brake pad materials are known for producing lower brake dust and controlled braking behaviour, helping maintain smooth braking response without excessive rotor wear. When placing your order, please select the required brake position (Front or Rear) from the variant options before adding the product to cart. Compatible Vehicle Ather 450X Specifications Brand: VesrahMaterial: Ceramic CompositeCountry of Origin: JapanQuantity: 1 Set Brake Pads Front Pad Code: SD-947Rear Pad Code: SD-953

Read more less

Vesrah SD-182 Rear Ceramic Brake Pads for Hero, Suzuki & Honda Motorcycles Product Description The Vesrah SD-182 Rear Ceramic Brake Pads are designed for motorcycles that use the SD-182 rear brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered to deliver stable braking performance and reduced brake dust. The Vesrah SD-182 rear brake pads are built as a direct replacement pad set compatible with motorcycles such as the Hero XPulse 200, XPulse Rally, Suzuki Gixxer 150, and Honda CB200X. The ceramic compound construction is designed to provide smooth braking response, controlled stopping power, and dependable everyday braking performance. Ceramic brake pad materials are known for producing lower brake dust and predictable braking behaviour, helping maintain consistent braking response during regular riding conditions. The pad compound interacts with the brake rotor to deliver reliable braking while minimizing excessive rotor wear. For riders replacing worn rear brake pads on their motorcycle, the Vesrah SD-182 ceramic rear brake pads provide a direct-fit replacement designed for everyday riding and commuting. Compatible Motorcycles (Rear Brake) Hero XPulse 200Hero XPulse RallySuzuki Gixxer 150Honda CB200X Specifications Brand: VesrahPad Code: SD-182Material: Ceramic CompositePosition: Rear BrakeCountry of Origin: JapanQuantity: 1 Set (Rear Brake Pads)

Read more less

Vesrah SD-250/4 Ceramic Brake Pads for Kawasaki Ninja Series Product Description The Vesrah SD-250/4 Ceramic Brake Pads are designed for Kawasaki motorcycles that use the SD-250/4 brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered to provide stable braking performance and reduced brake dust. The Vesrah SD-250/4 brake pads are compatible with Kawasaki sport motorcycles including the Ninja 300, Ninja 250R, and Ninja 400. The ceramic compound construction is designed to deliver smooth braking feel, controlled stopping power, and dependable performance during everyday riding. Ceramic brake pad materials are known for producing lower brake dust and predictable braking behaviour, helping maintain consistent braking response while minimizing unnecessary rotor wear. For Kawasaki Ninja owners replacing worn brake pads, the Vesrah SD-250/4 ceramic brake pads provide a direct-fit replacement designed for street riding and regular commuting. Important Fitment Note: Depending on the motorcycle model, the SD-250/4 pad may be used as a front brake pad or rear brake pad. Front Brake Fitment"Kawasaki Ninja 300Kawasaki Ninja 250RKawasaki Ninja 400 Rear Brake Fitment :Kawasaki Ninja 300Kawasaki Ninja 250RKawasaki Ninja 400 Please verify the required brake position before ordering. Specifications Brand: VesrahPad Code: SD-250/4Material: Ceramic CompositeCountry of Origin: JapanQuantity: 1 Set Brake Pads

Read more less

Vesrah SD-360 Front Ceramic Brake Pads for Yezdi Roadster and Adventure Product Description The Vesrah SD-360 Front Ceramic Brake Pads are designed for Yezdi motorcycles that use the SD-360 front brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered to deliver smooth braking response and reduced brake dust. The Vesrah SD-360 front brake pads are built as a direct replacement pad set compatible with the Yezdi Roadster and Yezdi Adventure. The ceramic compound construction is designed to provide controlled braking feel, stable stopping power, and dependable everyday braking performance. Ceramic brake pad materials are known for producing lower brake dust and predictable braking behaviour, helping maintain consistent braking response during regular riding conditions. The pad compound interacts with the brake rotor to provide reliable braking while minimizing excessive rotor wear. For riders replacing worn front brake pads on their Yezdi motorcycle, the Vesrah SD-360 ceramic front brake pads provide a direct-fit replacement designed for daily riding and regular commuting. Warranty Disclaimer This product includes manufacturer warranty coverage if provided by Vesrah. Rawtorque does not provide any additional warranty coverage beyond the manufacturer’s policy. Please refer to our Warranty Policy for complete terms and conditions. Compatible Motorcycles (Front Brake) Yezdi RoadsterYezdi Adventure Specifications Brand: VesrahPad Code: SD-360Material: Ceramic CompositePosition: Front BrakeCountry of Origin: JapanQuantity: 1 Set (Front Brake Pads)

Read more less

Vesrah SD-9068 Front Ceramic Brake Pads for BMW G310 and S1000R Product Description The Vesrah SD-9068 Front Ceramic Brake Pads are designed for BMW motorcycles that use the SD-9068 front brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered to deliver stable braking performance and reduced brake dust. The Vesrah SD-9068 front brake pads are built as a direct replacement pad set compatible with motorcycles such as the BMW G310 R, G310 GS, G310 RR and BMW S1000R. The ceramic compound construction is designed to provide smooth braking response, consistent stopping power, and dependable everyday braking performance. Ceramic brake pad materials are known for producing lower brake dust and predictable braking behaviour, helping maintain stable braking performance across regular riding conditions. The pad compound interacts with the brake rotor to deliver reliable braking while minimizing excessive rotor wear. For riders replacing worn front brake pads on their BMW motorcycle, the Vesrah SD-9068 ceramic front brake pads provide a direct-fit replacement suitable for street riding and everyday use. Compatible Motorcycles (Front Brake) BMW G310 RBMW G310 GSBMW G310 RRBMW S1000R (2014-2018)BMW S1000R (2018-onwards) Specifications Brand: VesrahPad Code: SD-9068Material: Ceramic CompositePosition: Front BrakeCountry of Origin: JapanQuantity: 1 Set (Front Brake Pads)

Read more less

Vesrah SD-9068 Front Ceramic Brake Pads for KTM RC & Adventure 390 Product Description The Vesrah SD-9068 Front Ceramic Brake Pads are designed for KTM motorcycles that use the SD-9068 front brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered for smooth braking performance and reduced brake dust. The Vesrah SD-9068 front brake pads are built as a direct replacement pad set compatible with KTM motorcycles including the RC 125, RC 200, RC 250, RC 390 and Adventure 390. The ceramic compound construction is designed to deliver controlled braking feel, consistent stopping power, and dependable performance during everyday riding. Ceramic brake pad materials are known for producing lower brake dust and predictable braking behaviour, helping maintain stable braking response across various riding conditions. The pad compound works with the brake rotor to provide reliable braking while minimizing excessive rotor wear. For riders replacing worn front brake pads on their KTM motorcycle, the Vesrah SD-9068 ceramic front brake pads provide a direct-fit replacement designed for street riding and regular use. Compatible Motorcycles (Front Brake) KTM RC 125KTM RC 200KTM RC 250KTM RC 390KTM Adventure 390 Specifications Brand: VesrahPad Code: SD-9068Material: Ceramic CompositePosition: Front BrakeCountry of Origin: JapanQuantity: 1 Set (Front Brake Pads)

Read more less

Vesrah SD-9068 Front Ceramic Brake Pads for Triumph 400 Series Product Description The Vesrah SD-9068 Front Ceramic Brake Pads are designed for Triumph motorcycles that use the SD-9068 front brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered for stable braking response and reduced brake dust. The Vesrah SD-9068 front brake pads are built as a direct replacement pad set compatible with the Triumph Speed 400, Scrambler 400, and Tiger 400. The ceramic compound construction is designed to deliver controlled braking feel, consistent stopping power, and dependable performance for everyday riding. Ceramic brake pad materials are known for producing lower brake dust and predictable braking behaviour, helping maintain stable braking performance across normal riding conditions. The pad compound works with the brake rotor to provide reliable braking while minimizing excessive rotor wear. For riders replacing worn front brake pads on their Triumph motorcycle, the Vesrah SD-9068 ceramic front brake pads provide a direct-fit replacement designed for street riding and regular commuting. Compatible Motorcycles (Front Brake) Triumph Speed 400Triumph Scrambler 400Triumph Tiger 400 Specifications Brand: VesrahPad Code: SD-9068Material: Ceramic CompositePosition: Front BrakeCountry of Origin: JapanQuantity: 1 Set (Front Brake Pads)

Read more less

Vesrah SD-947 Front Ceramic Brake Pads for Bajaj Dominar, NS & Pulsar Series Product Description The Vesrah SD-947 Front Ceramic Brake Pads are designed for Bajaj motorcycles that use the SD-947 front brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered to deliver stable braking performance and reduced brake dust. The Vesrah SD-947 front brake pads are built as a direct replacement pad set compatible with motorcycles such as the Bajaj Dominar 400, NS200, RS200, and Pulsar 200/220. The ceramic compound construction is designed to provide smooth braking response, controlled stopping power, and reliable everyday braking performance. Ceramic brake pad materials are known for producing lower brake dust and predictable braking behaviour, helping maintain consistent braking response across normal riding conditions. The pad compound interacts with the brake rotor to provide dependable braking while minimizing excessive rotor wear. For riders replacing worn front brake pads on their Bajaj motorcycle, the Vesrah SD-947 ceramic front brake pads provide a direct-fit replacement designed for daily riding and regular commuting. Compatible Motorcycles (Front Brake) Bajaj Dominar 400Bajaj NS200Bajaj RS200Bajaj Pulsar 200Bajaj Pulsar 220 Specifications Brand: VesrahPad Code: SD-947Material: Ceramic CompositePosition: Front BrakeCountry of Origin: JapanQuantity: 1 Set (Front Brake Pads)

Read more less

Vesrah SD-947 Front Ceramic Brake Pads for Royal Enfield Motorcycles Product Description The Vesrah SD-947 Front Ceramic Brake Pads are designed for Royal Enfield motorcycles that use the SD-947 front brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered to deliver smooth braking response and consistent stopping performance. The Vesrah SD-947 front brake pads are built as a direct replacement pad set compatible with Royal Enfield motorcycles including the Himalayan, Meteor 350, Hunter 350 and Classic 350. The ceramic compound construction is designed to provide controlled braking feel, stable stopping power, and dependable performance for everyday riding. Ceramic brake pad materials are known for producing lower brake dust and predictable braking behaviour, helping maintain consistent braking performance across regular riding conditions. The pad compound interacts with the brake rotor to provide reliable braking while minimizing unnecessary rotor wear. For riders replacing worn front brake pads on their Royal Enfield motorcycle, the Vesrah SD-947 ceramic front brake pads provide a direct-fit replacement suitable for daily riding and touring. Compatible Motorcycles (Front Brake) Royal Enfield Thunderbird 350Royal Enfield Thunderbird 500Royal Enfield Interceptor 650Royal Enfield HimalayanRoyal Enfield Classic 350Royal Enfield Classic 500Royal Enfield Electra 350Royal Enfield Meteor 350Royal Enfield Hunter 350Royal Enfield Himalayan 450Royal Enfield Shotgun 650 Specifications Brand: VesrahPad Code: SD-947Material: Ceramic CompositePosition: Front BrakeCountry of Origin: JapanQuantity: 1 Set (Front Brake Pads)

Read more less

Vesrah SD-947 Front Ceramic Brake Pads for Yamaha R15, MT-15 and FZ Series Product Description The Vesrah SD-947 Front Ceramic Brake Pads are designed for Yamaha motorcycles that use the SD-947 front brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered for smooth braking response and consistent stopping performance. The Vesrah SD-947 front brake pads are built as a direct replacement pad set compatible with Yamaha motorcycles such as the R15 V3, R15 V4, MT-15, FZ25, FZ16 and Fazer 25. The ceramic compound construction is designed to deliver controlled braking feel and stable stopping power during everyday riding. Ceramic brake pad materials are known for producing lower brake dust and predictable braking behaviour, helping maintain consistent braking response across regular riding conditions. The pad compound works with the brake rotor to provide reliable braking while minimizing unnecessary rotor wear. For riders replacing worn front brake pads on their Yamaha motorcycle, the Vesrah SD-947 ceramic front brake pads provide a direct-fit replacement suitable for daily riding and commuting. Compatible Motorcycles (Front Brake) Yamaha R15 V3Yamaha R15 V4Yamaha MT-15Yamaha FZ25Yamaha FZ16Yamaha Fazer 25 Specifications Brand: VesrahPad Code: SD-947Material: Ceramic CompositePosition: Front BrakeCountry of Origin: JapanQuantity: 1 Set (Front Brake Pads)

Read more less

Vesrah SD-953 Rear Ceramic Brake Pads for Bajaj Dominar, NS & Pulsar Product Description The Vesrah SD-953 Rear Ceramic Brake Pads are designed for Bajaj motorcycles that use the SD-953 rear brake pad shape. Manufactured by Vesrah in Japan, these brake pads use a ceramic composite compound engineered for smooth braking performance and reduced brake dust. The Vesrah SD-953 rear brake pads are built as a direct replacement pad set compatible with motorcycles such as the Bajaj Dominar 400, NS200, RS200, and Pulsar 200/220. The ceramic compound construction is designed to deliver controlled braking feel and consistent stopping performance during everyday riding. Ceramic brake pad materials are known for producing lower brake dust and stable braking response, helping maintain predictable braking behaviour across different riding conditions. The pad surface interacts with the brake rotor to provide reliable braking while minimizing excessive rotor wear. For riders looking to replace worn rear brake pads on their Bajaj motorcycle, the Vesrah SD-953 ceramic rear brake pads provide a direct-fit replacement designed for street use and everyday riding conditions. Compatible Motorcycles (Rear Brake) Bajaj Dominar 400 (UG19)Bajaj Dominar 400Bajaj NS200Bajaj RS200Bajaj Pulsar 200Bajaj Pulsar 220 Specifications Brand: VesrahPad Code: SD-953Material: Ceramic CompositePosition: Rear BrakeCountry of Origin: JapanQuantity: 1 Set (Rear Brake Pads)

Read more less

Vesrah SD-953 Rear Ceramic Brake Pads for BMW G310 R, G310 GS and S1000R Product Description The Vesrah SD-953 Rear Ceramic Brake Pads are designed for BMW motorcycles that use the SD-953 rear brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound developed for smooth braking response and reduced brake dust. The Vesrah SD-953 rear brake pads are built as a direct replacement brake pad set compatible with BMW G310 R, BMW G310 GS, and BMW S1000R motorcycles. The ceramic compound construction is designed to deliver consistent braking feel, stable stopping performance, and reliable everyday braking behaviour. Ceramic brake pad materials are known for producing lower brake dust and controlled braking performance, helping maintain predictable braking across regular riding conditions. The pad material interacts with the brake rotor to deliver steady braking while minimizing excessive rotor wear. For riders replacing worn rear brake pads on their BMW motorcycle, the Vesrah SD-953 ceramic rear brake pads provide a direct-fit replacement suitable for street riding and everyday use. Compatible Motorcycles (Rear Brake) BMW G310 RBMW G310 GSBMW S1000R (2014-2018)BMW S1000R (2018-onwards) Specifications Brand: VesrahPad Code: SD-953Material: Ceramic CompositePosition: Rear BrakeCountry of Origin: JapanQuantity: 1 Set (Rear Brake Pads)

Read more less

Vesrah SD-953 Rear Ceramic Brake Pads for Jawa and Yezdi Motorcycles Product Description The Vesrah SD-953 Rear Ceramic Brake Pads are designed for motorcycles that use the SD-953 rear brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered for stable braking performance and reduced brake dust. The Vesrah SD-953 rear brake pads are built as a direct replacement pad set compatible with motorcycles such as the Jawa 42, Yezdi Roadster, and Yezdi Adventure. The ceramic compound construction is designed to deliver smooth braking feel, consistent stopping power, and reliable everyday braking performance. Ceramic brake pad materials are known for producing lower brake dust and predictable braking response, helping maintain stable braking behaviour during regular riding conditions. The pad compound interacts with the brake rotor to provide controlled braking while minimizing excessive rotor wear. For riders replacing worn rear brake pads on their Jawa or Yezdi motorcycle, the Vesrah SD-953 ceramic rear brake pads provide a direct-fit replacement designed for everyday street riding. Compatible Motorcycles (Rear Brake) Jawa 42Yezdi RoadsterYezdi Adventure Specifications Brand: VesrahPad Code: SD-953Material: Ceramic CompositePosition: Rear BrakeCountry of Origin: JapanQuantity: 1 Set (Rear Brake Pads)

Read more less

Vesrah SD-953 Rear Ceramic Brake Pads for KTM RC & Adventure 390 Product Description The Vesrah SD-953 Rear Ceramic Brake Pads are designed for KTM motorcycles using the SD-953 pad shape. Manufactured by Vesrah in Japan, these pads use a ceramic composite compound designed for consistent braking performance and reduced brake dust. The SD-953 brake pads are built as a direct replacement rear brake pad set compatible with several KTM RC series motorcycles and the KTM Adventure 390. The ceramic compound construction focuses on smooth braking feel, controlled stopping power, and stable performance in everyday riding conditions. Compared to conventional brake pad materials, ceramic compounds are designed to produce lower brake dust while maintaining steady braking response. The pad material works with the brake disc to deliver predictable braking without excessive rotor wear. The Vesrah SD-953 rear brake pads are engineered for street use and are suitable for riders looking for a dependable replacement brake pad for their KTM motorcycle. Compatible Motorcycles KTM RC 125 – Rear BrakeKTM RC 200 – Rear BrakeKTM RC 250 – Rear BrakeKTM RC 390 – Rear BrakeKTM Adventure 390 – Rear Brake Specifications Brand: VesrahPad Code: SD-953Material: Ceramic CompositePosition: Rear BrakeCountry of Origin: JapanQuantity: 1 Set (Rear Brake Pads)

Read more less

Vesrah SD-953 Rear Ceramic Brake Pads for Royal Enfield Motorcycles Product Description The Vesrah SD-953 Rear Ceramic Brake Pads are designed for Royal Enfield motorcycles using the SD-953 rear brake pad shape. Manufactured by Vesrah in Japan, these pads use a ceramic composite compound engineered for stable braking performance and reduced brake dust. The Vesrah SD-953 rear brake pads are built as a direct replacement pad set compatible with several Royal Enfield motorcycles including the Himalayan, Meteor 350, Hunter 350, and Interceptor 650. The ceramic compound construction is designed to deliver smooth braking feel, consistent stopping performance, and reliable everyday street braking. Ceramic brake pad materials are known for producing lower brake dust and controlled braking response compared to many traditional compounds. The pad surface interacts with the brake rotor to maintain predictable braking behaviour while minimizing unnecessary rotor wear. Designed for daily riding conditions, the Vesrah SD-953 rear ceramic brake pads provide a dependable replacement option for riders looking to maintain proper braking performance on their Royal Enfield motorcycle. Compatible Motorcycles (Rear Brake) Royal Enfield ThunderBird 350Royal Enfield ThunderBird 500Royal Enfield Interceptor 650Royal Enfield HimalayanRoyal Enfield Classic 350Royal Enfield Classic 500Royal Enfield Electra 350Royal Enfield Meteor 350Royal Enfield Hunter 350Royal Enfield Himalayan 450Royal Enfield Shotgun 650 Specifications Brand: VesrahPad Code: SD-953Material: Ceramic CompositePosition: Rear BrakeCountry of Origin: JapanQuantity: 1 Set (Rear Brake Pads)

Read more less

Vesrah SD-953 Rear Ceramic Brake Pads for Suzuki Gixxer 250 and V-Strom 250 SX Product Description The Vesrah SD-953 Rear Ceramic Brake Pads are designed for Suzuki motorcycles that use the SD-953 rear brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered for stable braking performance and reduced brake dust. The Vesrah SD-953 rear brake pads are a direct replacement brake pad set compatible with Suzuki Gixxer 250 and Suzuki V-Strom 250 SX motorcycles. The ceramic compound construction is designed to deliver smooth braking feel, consistent stopping power, and reliable everyday braking performance. Ceramic brake pad materials are known for producing lower brake dust and controlled braking response, helping maintain predictable braking behaviour during regular riding conditions. The pad surface works with the brake rotor to provide steady braking while minimizing excessive rotor wear. For riders replacing worn rear brake pads on their Suzuki motorcycle, the Vesrah SD-953 ceramic rear brake pads provide a direct-fit replacement designed for everyday street riding. Compatible Motorcycles (Rear Brake) Suzuki Gixxer 250Suzuki V-Strom 250 SX Specifications Brand: VesrahPad Code: SD-953Material: Ceramic CompositePosition: Rear BrakeCountry of Origin: JapanQuantity: 1 Set (Rear Brake Pads)

Read more less

Vesrah SD-953 Rear Ceramic Brake Pads for Triumph Motorcycles Product Description The Vesrah SD-953 Rear Ceramic Brake Pads are designed for Triumph motorcycles that use the SD-953 rear brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered to provide smooth braking response and consistent stopping performance. The Vesrah SD-953 rear brake pads are built as a direct replacement brake pad set compatible with motorcycles such as the Triumph Speed 400, Scrambler 400, and Street Triple 675. The ceramic compound construction is designed to deliver stable braking feel, controlled stopping power, and reliable performance during everyday riding. Ceramic brake pad materials are known for producing lower brake dust and predictable braking behaviour, helping maintain steady braking performance across various riding conditions. The pad compound works with the brake rotor to provide consistent braking while minimizing excessive rotor wear. For riders replacing worn rear brake pads on their Triumph motorcycle, the Vesrah SD-953 ceramic rear brake pads provide a direct-fit replacement designed for street riding and regular commuting. Compatible Motorcycles (Rear Brake) Triumph Street Triple 675Triumph Street Triple 675 RTriumph Speed 400Triumph Scrambler 400Triumph Tiger 400 Specifications Brand: VesrahPad Code: SD-953Material: Ceramic CompositePosition: Rear BrakeCountry of Origin: JapanQuantity: 1 Set (Rear Brake Pads)

Read more less

Vesrah SD-958 Front Ceramic Brake Pads for Royal Enfield 650 & Himalayan 450 Product Description The Vesrah SD-958 Front Ceramic Brake Pads are designed for Royal Enfield motorcycles that use the SD-958 front brake pad shape. Manufactured in Japan, these brake pads use a ceramic composite compound engineered to deliver smooth braking response and consistent stopping performance. The Vesrah SD-958 front brake pads are built as a direct replacement pad set compatible with Royal Enfield motorcycles such as the Interceptor 650, Himalayan 450, and Super Meteor 650. The ceramic compound construction is designed to provide controlled braking feel, stable stopping power, and dependable everyday braking performance. Ceramic brake pad materials are known for producing lower brake dust and predictable braking behaviour, helping maintain consistent braking response during regular riding conditions. The pad compound interacts with the brake rotor to deliver reliable braking while minimizing excessive rotor wear. For riders replacing worn front brake pads on their Royal Enfield motorcycle, the Vesrah SD-958 ceramic front brake pads provide a direct-fit replacement designed for daily riding and touring. Compatible Motorcycles (Front Brake) Royal Enfield Interceptor 650Royal Enfield Himalayan 450Royal Enfield Super Meteor 650 Specifications Brand: VesrahPad Code: SD-958Material: Ceramic CompositePosition: Front BrakeCountry of Origin: JapanQuantity: 1 Set (Front Brake Pads)

Read more less

Volkswagen Jetta GLI Body Kit (2012+)This Volkswagen Jetta GLI body kit (2012+) is a quality aftermarket styling kit, made from ABS Plastic, designed for a precise, model-specific fit.Compatible Vehicle(s)Volkswagen Jetta (2012+)Specifications Kit Type: Full Body Kit Material: ABS Plastic Vehicle Brand: Volkswagen Condition: New Sold per Kit. Unbranded / universal-market aftermarket product. Professional installation & painting recommended.

Read more less

Volkswagen Polo GTI Rear Bumper (ABS)GTI-style rear bumper for the VW Polo, made from durable ABS plastic with a precise, model-specific fit.Compatible Vehicle(s)Volkswagen Polo (GTI-style)Specifications Vehicle Brand: Volkswagen Vehicle Model: Polo GTI Bumper Position: Rear Material: ABS Plastic Sold per Piece. Unbranded / universal-market aftermarket product. Professional installation & painting recommended.

Read more less

Volkswagen Polo GTI Side Skirts (ABS, Matte Black)GTI-style side skirts for the VW Polo, made from durable ABS plastic with a matte-black finish and a precise, model-specific fit.Compatible Vehicle(s)Volkswagen PoloSpecifications Vehicle Model: Volkswagen Polo Type: Side Skirts (Pair) Material: ABS Plastic Finish: Matte Black Sold per Pair. Unbranded / universal-market aftermarket product. Professional installation recommended.

Read more less

Volkswagen Polo R-Line Body Kit (ABS)This Volkswagen Polo R-Line body kit is a quality aftermarket styling kit, made from ABS Plastic, designed for a precise fit on all Polo models. Includes front bumper, rear bumper, side skirts and diffuser with DRL provision.Compatible Vehicle(s)Volkswagen Polo (all models)Kit IncludesFront Bumper, Rear Bumper, Side Skirts, DiffuserSpecifications Kit Type: Full Body Kit Material: ABS Plastic Vehicle Brand: Volkswagen With Lights: DRL Provision Sold per Set. Unbranded / universal-market aftermarket product. Professional installation & painting recommended.

Read more less

Volkswagen Polo WRC Full Body Kit (ABS)The Volkswagen Polo WRC Body Kit is a quality aftermarket styling upgrade, made from durable ABS plastic with WRC-inspired styling and a precise, model-specific fit.Compatible Vehicle(s)Volkswagen PoloSpecifications Vehicle Segment: Hatchback Kit Type: Full Body Kit Material: ABS Plastic Vehicle Brand: Volkswagen Finish: Unpainted Sold per Set. Unbranded / universal-market aftermarket product. Professional installation & painting recommended.

Read more less