Products

Built for riders who want dependable protection without compromising the motorcycle's styling, the Moto Torque Crash Guard V2.0 is engineered specifically for the Honda CB350 RS. Manufactured using high-strength mild steel tubing and precision fabrication techniques, this crash guard is designed to help protect critical motorcycle components during low-speed drops and accidental tip-overs while maintaining a clean, integrated appearance. Its vehicle-specific design follows the lines of the CB350 RS, offering protection without looking bulky or out of place. Key Features Premium Steel Construction Manufactured using 25.4 mm mild steel tubing Strong and durable construction for daily use Designed to withstand impacts during accidental falls Precision welded for structural integrity Durable Surface Finish Shot-blasted surface preparation Powder-coated finish for corrosion resistance Uniform and long-lasting coating quality Motorcycle-Specific Design Developed exclusively for Honda CB350 RS Clean integrated appearance Does not interfere with normal riding ergonomics Helps protect engine and side sections during minor impacts Strong Mounting System Multiple mounting points for improved stability Secure fitment design DIY-friendly installation Protection Where It Matters The Crash Guard V2.0 is designed to provide an additional layer of protection to critical motorcycle components, helping reduce potential damage during parking mishaps, low-speed falls and tip-over situations. Package Contents 1 × Moto Torque Crash Guard V2.0 Complete Mounting Hardware Installation Guide Installation Tools Required Allen Key – 4 mm & 6 mm Spanner – 13 mm Fitment Comes with DIY installation guidance. Professional installation is recommended for best results. Important Note Compatible only with Honda CB350 RS. Product images are for representation purposes only. Minor variations in finish may occur due to manufacturing processes. Periodically inspect all mounting hardware and tighten if necessary.

Read more less

The Moto Torque Engine Guard for Honda CB200X is designed specifically to provide underside protection for the engine and lower frame area of the Honda CB200X. This is a model-specific component and is not intended for universal fitment. Model-Specific Compatibility – Honda CB200X Designed exclusively for Honda CB200X Engineered to align with factory mounting geometry Structured to integrate with the lower chassis layout Compatibility beyond Honda CB200X is not stated. Structural Protection This engine guard is intended to: Provide coverage to the lower engine casing Reduce direct exposure to debris, stones, and uneven terrain Offer added underside reinforcement during mixed-surface riding Scope clarification: This guard is designed to reduce damage from debris and low to moderate impact situations. It is not designed to prevent structural damage in high-speed collisions. Material & Construction (Official listing does not specify thickness in this image, so we do not assume.) Constructed from Mild Steel CNC cut design (visible from structure pattern) Powder-coated finish Designed for structured underside coverage No specific sheet thickness is mentioned in the provided material. Design Features Vent and cut-out sections for airflow and weight optimization Structured coverage without excessive bulk Designed to complement the CB200X lower frame profile Installation Bolt-on mounting system Professional installation recommended for correct alignment and torque settings Product Specifications Brand: Moto Torque Product Type: Engine Guard Motorcycle Compatibility: Honda CB200X Material: Mild Steel Finish: Powder Coated Application: Underside engine protection

Read more less

The Moto Torque Engine Guard for TVS Ronin is designed to provide essential underbody protection for everyday riding and light trail use. Built specifically for the TVS Ronin platform, this guard shields the lower engine area from debris, surface impacts, and road hazards. Constructed using 1.5 mm thick mild steel, the guard offers structural strength while maintaining practical durability under varying heat and weather conditions. Designed for TVS Ronin • Precision fitment for TVS Ronin• Direct mounting to stock points• Designed to protect lower engine section Material & Construction • 1.5 mm thick mild steel construction• Resistant to cracking under heat and rain exposure• Rigid protective structure The compact design protects vulnerable lower engine areas without altering the motorcycle’s core structure. Protection Function • Shields underside from stones and debris• Suitable for city roads and light trail use• Adds practical protection without excessive bulk Specifications • Brand: Moto Torque• Compatibility: TVS Ronin• Material: Mild Steel• Thickness: 1.5 mm• Product Type: Engine Guard / Bash Plate

Read more less

Engine Guard MS for TVS Apache RTX 300 – Mild Steel Engine Protection The Mototorque Engine Guard MS for TVS Apache RTX 300 is designed specifically to protect the engine area of the Apache RTX 300 from road debris, minor impacts, and everyday riding hazards. Built from mild steel (MS) and finished with powder coating, this guard adds a protective barrier without altering the motorcycle’s intended structure. For riders of the TVS Apache RTX 300, the engine area remains one of the most exposed mechanical zones. Stones, gravel, loose debris, and uneven terrain can lead to surface damage or unwanted wear over time. This engine guard acts as a structural shield, reducing direct exposure and helping maintain the integrity of critical components. This is not a universal guard. It is engineered exclusively for the TVS Apache RTX 300, ensuring model-specific mounting alignment and proper positioning. Precision in fitment matters because poorly aligned accessories can cause vibration, rattling, or interference with factory components. A model-dedicated guard avoids those issues by integrating with the bike’s original mounting geometry. Constructed using mild steel, the guard prioritizes durability and strength. Mild steel is commonly used in protective motorcycle accessories because of its ability to absorb impact without cracking under typical riding stresses. It provides structural resistance suitable for everyday commuting and touring conditions. The powder-coated finish enhances resistance against corrosion and environmental exposure, contributing to longer surface life compared to untreated metal. This engine guard is intended for riders who: • Commute daily on mixed road conditions• Ride through gravel, broken roads, or mild trail sections• Tour long distances where debris impact is common• Prefer structural engine area protection without unnecessary complexity Protection accessories should remain functional first. This guard does not claim performance enhancement or weight reduction. Its purpose is mechanical shielding and surface protection for the engine area of the TVS Apache RTX 300. Installation is designed around the Apache RTX 300’s frame structure. As with any structural accessory, professional installation is recommended to ensure correct torque settings and proper alignment. Proper fitment ensures stability and reduces the chance of unwanted vibration over time. Build and Finish • Material: Mild Steel (MS)• Finish: Powder-coated surface• Model Compatibility: TVS Apache RTX 300 The powder coating provides a protective layer over the steel surface. This helps resist rust formation caused by water exposure, humidity, or general riding environments. While no coating is permanent against extreme conditions, proper maintenance and cleaning will extend its lifespan. Practical Riding Value Engine casing damage is often cosmetic at first — chipped paint, minor dents, scratches. But consistent exposure without protection can escalate into deeper wear. An engine guard acts as a buffer zone. Instead of debris directly striking the engine casing, the impact is absorbed by the guard structure. For touring riders or those who encounter unpredictable road surfaces, that added layer of protection reduces risk and repair costs. It also contributes to maintaining resale value by preserving the condition of visible engine components. This product focuses on structural protection. It does not modify performance characteristics, does not alter engine tuning, and does not change the riding geometry of the motorcycle. Warranty Information • 6 months warranty on powder coating finish• Lifetime warranty on stainless steel nuts and bolts Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms, claim process, and policy details, please refer to our official warranty policy page.

Read more less

Foot Rest for TVS Apache RTX 300 – Rear Passenger Support and Stability The Mototorque Foot Rest for TVS Apache RTX 300 is designed to provide secure and stable foot placement for the pillion rider. Built specifically for the TVS Apache RTX 300, this foot rest integrates with the motorcycle’s rear mounting structure to support passenger comfort and balance during everyday riding and touring conditions. Passenger ergonomics play a direct role in ride stability and overall comfort. A properly positioned foot rest ensures that the pillion rider maintains steady posture, especially during acceleration, braking, and cornering. Without adequate foot support, passenger movement can affect balance and riding dynamics. This foot rest is engineered exclusively for the TVS Apache RTX 300. Model-specific compatibility ensures alignment with factory mounting points and maintains proper spacing relative to the motorcycle’s frame and exhaust area when installed correctly. Designed Specifically for TVS Apache RTX 300 This is not a universal fit accessory. It is structured around the rear geometry of the TVS Apache RTX 300 to ensure: • Proper alignment with stock mounting points• Stable passenger foot positioning• Maintained ground clearance profile• Integration with factory rear structure Correct fitment ensures that passenger comfort is improved without interfering with rider control or structural balance. Functional Support for Passenger Riding A foot rest serves a practical purpose beyond comfort. It contributes to: • Improved passenger stability• Reduced unwanted movement during riding• Better weight distribution• Controlled posture during braking and acceleration For motorcycles used frequently with a pillion rider, stable rear foot support is an essential ergonomic component. It is important to define scope clearly. This accessory is designed to provide passenger foot support and stability. It does not alter suspension characteristics or increase load rating beyond manufacturer recommendations. Practical Use Cases This foot rest suits: • Daily commuters riding with a passenger• Touring riders covering long distances with pillion• Riders seeking secure passenger ergonomics• Owners replacing or upgrading stock foot rests A stable rear foot platform enhances ride confidence for both rider and passenger. Build and Application • Designed for: TVS Apache RTX 300• Application: Rear passenger foot support The foot rest integrates into the rear mounting area while preserving factory ergonomics when installed properly. Installation Considerations Professional installation is recommended to ensure secure alignment and correct torque settings. Passenger support accessories must be mounted firmly to avoid movement during riding. Since this foot rest is designed specifically for the TVS Apache RTX 300, installation aligns with factory mounting geometry when installed correctly. Warranty • 6 Months Warranty on powder coating finish.• Lifetime Warranty on stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

Front Master Cylinder Guard for TVS Apache RTX 300 – Brake System Protection The Mototorque Front Master Cylinder Guard for TVS Apache RTX 300 is engineered to provide protective coverage to the motorcycle’s front brake master cylinder assembly. Designed specifically for the TVS Apache RTX 300, this guard is fabricated from premium stainless steel, built to shield the front brake master cylinder from stones, debris, and accidental impacts encountered during daily riding or touring conditions. The brake master cylinder is a key component of the braking system that houses hydraulic mechanisms responsible for transferring rider input into braking power. Positioned high on the cockpit area, it remains exposed to external elements and accidental knocks. Even minor impacts can cause surface damage or cosmetic wear, potentially leading to more significant long-term issues. A master cylinder guard introduces a protective frame around the exposed area, helping reduce direct impact exposure while preserving brake functionality. This guard is engineered exclusively for the TVS Apache RTX 300. Model-specific design ensures that it aligns precisely with the original brake master cylinder and handlebar configuration. Proper fitment ensures that the guard provides protection without interfering with brake lever movement or control mechanism function, preserving safety and operational reliability. Designed Specifically for TVS Apache RTX 300 This is not a one-size-fits-all accessory. The Front Master Cylinder Guard for TVS Apache RTX 300 is crafted around the unique mounting points and spatial configuration of this model’s front assembly, ensuring: • Precise alignment with stock brake master cylinder position• No interference with brake lever or control cables• Maintained clearance for ergonomic control• Seamless integration with factory layout when installed properly Accurate fitment is critical for components positioned near control systems because even minor misalignment can affect usability or rider confidence. Stainless Steel Construction and Durability This guard is constructed from stainless steel, chosen for its corrosion resistance, strength, and endurance in demanding riding environments. Stainless steel resists rust and wear, which is especially important for components located near exposed filter and brake systems where water, dust, and road grit can accelerate wear. Stainless steel construction offers: • Resilience against corrosion and environmental exposure• Reliability under varied riding conditions• Structural integrity that resists deformation• Long-lasting performance with minimal maintenance This makes the guard not only protective but durable over repeated ride scenarios. Functional Protection in Real-World Conditions Motorcycles encounter various riding conditions where loose gravel, stones, and airborne debris can strike components directly. The front brake master cylinder is one of the exposed areas in such scenarios. A guard helps: • Reduce direct contact with loose road debris• Provide a protective buffer for sensitive brake components• Preserve exterior finish and structural surfaces• Output stable performance even in dusty or wet conditions Protective guards help maintain component condition, which in turn supports overall system longevity and reliability. It is important to define scope: this guard is intended to protect against minor surface impacts and debris contact. It does not replace routine brake maintenance or alter brake system performance characteristics. Practical Use Case This guard is suitable for: • Daily commuters navigating mixed road conditions• Touring riders covering highways and rural routes• Riders seeking enhanced protection for brake components• Owners focused on long-term component condition preservation Protecting the brake master cylinder helps keep critical controls operating smoothly and looking tidy despite constant environmental exposure. Installation and Fitment Professional installation is recommended to ensure proper alignment and secure mounting. Since this guard is designed specifically for the TVS Apache RTX 300, installation aligns with the factory handlebar and brake system layout when mounted as intended. Warranty • Lifetime Warranty on stainless steel guard and stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

Front Master Cylinder Guard MS for TVS Apache RTX 300 – Brake System Protection The Mototorque Front Master Cylinder Guard MS for TVS Apache RTX 300 is designed to provide protective coverage to the front brake master cylinder area. Built specifically for the TVS Apache RTX 300, this mild steel (MS) guard integrates with the motorcycle’s front brake assembly to add a layer of structural shielding without interfering with normal braking operation when installed correctly. The front master cylinder is a critical component in the braking system. It houses hydraulic mechanisms responsible for transmitting brake lever input into braking force. Positioned on the handlebar area, it remains exposed to external impact, accidental contact, and environmental elements. Even minor knocks or unintended contact can cause scratches or damage to this sensitive component. A master cylinder guard introduces a protective barrier around this exposed section. It helps reduce direct impact exposure while maintaining functional accessibility to the brake system. Designed Specifically for TVS Apache RTX 300 This front master cylinder guard is engineered exclusively for the TVS Apache RTX 300. Model-specific compatibility ensures that the guard aligns correctly with the master cylinder layout and handlebar configuration of the motorcycle. Fitment advantages include: • Designed around the Apache RTX 300 brake assembly• Maintains clearance for brake lever operation• Integrates with factory positioning• No universal adjustment required when installed properly Accessories mounted near control systems must maintain operational freedom. A correctly fitted guard ensures that braking performance remains unaffected. Mild Steel Construction (MS) The guard is constructed using mild steel (MS), a material commonly used in protective motorcycle accessories due to its strength and structural durability. Mild steel offers: • Solid resistance to minor impact• Structural rigidity• Reliable durability for everyday riding• Suitability for protective applications The construction is intended to provide mechanical shielding around the master cylinder area, helping reduce potential surface damage from external contact. Functional Protection in Real-World Conditions During daily riding, motorcycles encounter: • Tight parking environments• Close traffic movement• Accidental handlebar contact• Roadside obstacles The front brake master cylinder sits in an exposed position that can be vulnerable in such scenarios. A guard provides an added protective frame around the component, helping reduce the risk of direct impact. It is important to define scope clearly. This guard is designed to provide structural protection against minor contact or low-impact situations. It is not intended to prevent damage in high-speed accidents or severe collisions. Practical Use Case This accessory suits: • Daily commuters navigating congested areas• Riders parking in confined spaces• Touring riders seeking additional component protection• Owners who prioritize safeguarding exposed brake components Protecting brake system components contributes to maintaining mechanical integrity. The master cylinder plays a direct role in braking function, making protective coverage a practical consideration. Installation and Fitment Considerations Professional installation is recommended to ensure proper alignment and secure mounting. Since this guard is positioned near a critical control system, correct fitment is important to avoid interference with lever movement or brake function. Designed specifically for the TVS Apache RTX 300, installation aligns with the motorcycle’s stock configuration when mounted properly. Build and Application • Designed for: TVS Apache RTX 300• Material: Mild Steel (MS)• Application: Front brake master cylinder protection This accessory integrates into the handlebar brake assembly area while maintaining operational clearance.

Read more less

GPS Mount for TVS Apache RTX 300 – Navigation Device Mounting Bracket The Mototorque GPS Mount for TVS Apache RTX 300 is designed to provide a stable mounting platform for GPS devices and compatible navigation accessories. Built specifically for the TVS Apache RTX 300, this mount integrates with the motorcycle’s cockpit area to support secure placement of navigation units without interfering with riding controls when installed correctly. Modern touring and long-distance riding increasingly rely on GPS-based navigation. Riders require a mounting solution that keeps the device visible, accessible, and stable even over uneven surfaces. A dedicated GPS mount offers a fixed bracket solution rather than temporary clamp-based alternatives. This GPS mount is engineered exclusively for the TVS Apache RTX 300. Model-specific compatibility ensures proper alignment with the handlebar or cockpit structure based on the bike’s geometry. Correct fitment is critical in navigation mounting systems because vibration, misalignment, or poor placement can reduce readability and usability. Designed Specifically for TVS Apache RTX 300 This is not a universal mount. It is structured around the cockpit layout of the TVS Apache RTX 300 to ensure compatibility with the motorcycle’s front assembly. Fitment advantages include: • Designed around Apache RTX 300 cockpit geometry• Maintains visibility line for navigation devices• Integrates without obstructing instrument cluster• Preserves handlebar control clearance when installed properly Model-dedicated mounting reduces unnecessary adjustment and improves stability compared to generic mounts. Functional Utility for Touring and Daily Riding A GPS mount enhances riding convenience by positioning the navigation device within the rider’s natural line of sight. This reduces the need to look away from the road or rely solely on audio directions. Practical benefits include: • Secure device positioning• Improved navigation visibility• Reduced need for temporary mounts• Structured placement for long-distance riding For touring riders covering unfamiliar routes, a fixed mounting solution supports consistent navigation access. It is important to define scope clearly. This product functions as a mounting bracket. It does not include a GPS device and does not alter the motorcycle’s electronic systems. Stability and Riding Conditions Motorcycles operate under constant vibration. Any cockpit-mounted accessory must remain stable under acceleration, braking, and uneven road conditions. A properly installed GPS mount provides a stable base that helps minimize excessive movement. Correct installation ensures: • Secure fastening• Stable device positioning• Maintained rider ergonomics• Unrestricted control access Professional installation is recommended to ensure alignment and secure mounting. Practical Use Case This GPS mount suits: • Long-distance touring riders• Adventure route riders• Daily commuters using navigation apps• Riders installing dedicated GPS units Navigation accessories are practical additions for riders who regularly explore new routes or commute in traffic-dense areas. Build and Application • Designed for: TVS Apache RTX 300• Application: GPS / navigation device mounting This mount integrates into the cockpit area while maintaining functional accessibility.

Read more less

Handle Bar Riser for TVS Apache RTX 300 – Upright Riding Position & Ergonomic Control The Mototorque Handle Bar Riser for TVS Apache RTX 300 is engineered to elevate the motorcycle’s handlebar height, offering riders a more upright riding stance and improved ergonomic comfort for long rides, city traffic, and touring use. Designed exclusively for the TVS Apache RTX 300, this handle bar riser integrates precisely with existing handlebar clamps to deliver enhanced control without compromising structural stability when installed correctly. The stock handlebar height on many motorcycles is a compromise between aggressive sport posture and everyday usability. For riders looking to reduce forward lean, improve wrist comfort, and gain a more commanding riding position — especially on extended trips or rough roads — a handle bar riser offers a focused solution. This handle bar riser is compatible specifically with the TVS Apache RTX 300. Engineered to fit the handlebar assembly and clamp structure of this model, it maintains compatibility with brake, clutch, throttle, and switchgear systems when mounted properly. Designed Specifically for TVS Apache RTX 300 This is not a universal accessory. The handle bar riser is modeled around the TVS Apache RTX 300’s cockpit geometry to ensure: • Correct alignment with factory handlebar clamps• Adequate clearance for cables and controls• Stable elevation without function interference• No modification to stock wiring or controls when installed properly A model-specific design ensures that the riser supports ergonomic improvement without introducing unintended handling issues. Functional Benefits of the Riser The purpose of a handle bar riser is to adjust the rider’s posture for better comfort and control. By slightly lifting the handlebar height, the rider’s torso angle becomes more upright. This shift offers several practical advantages: • Reduced wrist pressure during long rides• Improved upper body comfort• Better visibility in traffic and touring conditions• Enhanced maneuverability at low speeds Riders who frequently cover longer distances or navigate city traffic can benefit from the adjusted posture without compromising confidence in control. It is important to define scope clearly. A handle bar riser adjusts ergonomic posture and control feel. It does not increase power, alter suspension dynamics, or modify the motorcycle’s handling character beyond rider posture adjustments. Build, Integration & Stability The handle bar riser kit is built with structural rigidity in mind. When installed, it positions the handlebar at a slightly elevated level while securing it within the factory clamp area. Key structural characteristics include: • Stable mounting• Maintained control cable routing• Compatibility with TVS Apache RTX 300 factory controls• Secure elevation of the handlebar assembly Correct installation ensures consistent stability and eliminates unwanted vibration that can arise from improper setup.Finish: Black (as shown in product images) Real-World Use Scenarios This handle bar riser is suited for: • Touring riders seeking a relaxed posture• City commuters covering extended traffic periods• Riders who prefer reduced forward lean• Owners customizing cockpit ergonomics Ergonomic control improvements can change the riding experience significantly, especially over longer distances or during multi-day trips. Installation and Fitment Professional installation is recommended to ensure secure torque settings and proper alignment. Components mounted near the steering assembly must be installed accurately to avoid unintended movement during operation. Since this handle bar riser is designed specifically for the TVS Apache RTX 300, installation aligns with the factory mounting geometry when mounted properly. Warranty • 6 Months Warranty on powder coating finish.• Lifetime Warranty on stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

Better Ergonomics. Better Control. The Moto Torque Handlebar Riser for Guerrilla 450 is engineered for riders who want improved comfort without compromising control or handling feel. By increasing the handlebar height by approximately 1 inch, the riser reduces wrist pressure, improves upper-body posture, and creates a more relaxed riding experience during city commutes and long-distance touring. Precision-machined for direct fitment on the Royal Enfield Guerrilla 450, this riser integrates cleanly with the stock handlebar setup while maintaining a factory-style appearance. Whether you're navigating traffic, cruising highways, or riding longer weekend routes, the raised handlebar position helps reduce fatigue and improves overall rider comfort. Key Features Approximate 1-inch handlebar rise Improved upright riding posture Reduces wrist and shoulder fatigue Better comfort for touring and daily rides Direct bolt-on fitment Maintains factory-style cockpit feel Clean black finish for OEM-like appearance Compatible with stock handlebar setup

Read more less

Ride Higher. Ride Smarter. The Moto Torque Handlebar Risers for Yamaha XSR 155 are designed to improve rider ergonomics by raising the handlebar position. This reduces wrist strain, improves posture, and delivers a more comfortable riding stance—especially for long rides and city commuting. 🧍 Improved Riding Ergonomics Raises handlebar position for a more upright posture Reduces pressure on wrists, shoulders, and lower back Ideal for daily commuting and touring 🛣️ Better Control & Comfort Enhances rider confidence in traffic and long rides Improves handling feel with a more natural reach Reduces fatigue during extended riding sessions 🏗️ Aluminium Construction Built using lightweight aluminium Strong and durable for daily riding conditions Designed to maintain structural integrity under load 🎯 Bike-Specific Fitment Designed specifically for Yamaha XSR 155 Seamless integration with stock handlebar mounts No major modifications required 🛠️ Easy Installation Bolt-on installation Compatible with stock cables and wiring (in most cases) Quick upgrade with minimal effort ⚠️ Important Notes Check cable slack after installation Riding posture will change—may require adjustment period Intended for comfort, not aggressive racing setups 🛡️ Warranty Manufacturer warranty as provided by Moto Torque RawTorque Note:RawTorque does not provide any additional warranty beyond the manufacturer’s coverage.For more details, refer to our warranty policy.

Read more less

Head Light Grill- Spider Design for TVS Apache RTX 300 – Headlamp Protection Accessory The Mototorque Head Light Grill (Spider) for TVS Apache RTX 300 is designed to provide structured front-end protection while enhancing the visual character of the motorcycle. Built specifically for the TVS Apache RTX 300, this headlight grill aligns with the factory headlamp configuration to ensure proper fitment and functional integration. The headlight assembly is one of the most exposed components on any motorcycle. Positioned at the front, it directly faces road debris, flying stones, insects, and unpredictable riding conditions. Even minor impact can lead to scratches or cracks, potentially resulting in costly replacement. A headlight grill introduces an added layer of physical shielding between the headlamp and the external environment. This Spider-style headlight grill is engineered exclusively for the TVS Apache RTX 300. Model-specific compatibility ensures correct alignment with the stock mounting points and headlight housing. A dedicated design reduces the risk of vibration, misalignment, or beam obstruction when installed properly. Designed Specifically for TVS Apache RTX 300 Precision fitment matters. This headlight grill is not a universal accessory. It is developed for the TVS Apache RTX 300 to match the dimensions and structure of the factory headlamp unit. Key compatibility advantages include: • Model-aligned mounting structure• Clean integration with stock headlight design• No forced adjustments during installation• Maintains factory styling proportions A correctly fitted grill protects without interfering with the motorcycle’s original engineering. Spider Design – Functional and Visual Impact The Spider pattern offers a distinctive front-end appearance while maintaining functional light transmission. The structural layout distributes potential impact force across multiple points instead of concentrating pressure in one location. This geometric arrangement helps maintain durability while allowing the headlight beam to project forward effectively when properly installed. The open design supports airflow and visibility, making it suitable for daily commuting as well as extended rides. The Spider styling also adds a purposeful, aggressive character to the front fascia of the TVS Apache RTX 300. Riders looking to enhance presence without altering core components often choose structured headlight protection for both visual and functional value. Practical Protection for Real-World Riding Motorcycles operate in unpredictable environments. Loose gravel, highway debris, and urban road particles are common exposure points. A headlight grill acts as a protective barrier that reduces direct surface impact. This accessory is suitable for: • Daily urban commuting• Highway riding• Touring conditions• Mixed-surface routes It is important to understand the scope of protection. The headlight grill is designed to reduce exposure to minor debris and surface-level impact. It is not intended to serve as crash protection during high-impact accidents. Installation and Fitment For optimal results, proper installation is recommended. Ensuring secure mounting prevents unwanted movement and maintains structural alignment. A stable fit also helps avoid unnecessary vibration that may occur with improperly secured accessories. Because it is designed specifically for the TVS Apache RTX 300, installation aligns with the bike’s headlight configuration without requiring structural modification when mounted correctly. Build and Application • Designed for: TVS Apache RTX 300• Style: Spider pattern• Application: Headlight protection The grill integrates into the front profile while preserving the bike’s headlamp functionality. Warranty • 6 Months Warranty on powder coating finish.• Lifetime Warranty on stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

Head Light Grill Honey Comb for TVS Apache RTX 300 – Front Protection Accessory The Mototorque Head Light Grill Honey Comb for TVS Apache RTX 300 is designed to provide protective coverage to the motorcycle’s headlight assembly while maintaining a clean and aggressive front profile. Built specifically for the TVS Apache RTX 300, this accessory aligns with the stock headlamp design and mounting structure, ensuring compatibility without unnecessary modifications. The headlight is one of the most exposed components at the front of any motorcycle. During regular riding, it faces constant exposure to flying stones, debris, insects, and unpredictable road conditions. Even minor impact can lead to scratches or cracks that may require costly replacement. A headlight grill adds a physical barrier between the environment and the headlamp surface, reducing direct exposure. This honeycomb-style grill is engineered exclusively for the TVS Apache RTX 300. Model-specific compatibility matters because incorrect fitment can cause vibration, misalignment, or restricted beam pattern. A product designed around the exact geometry of the RTX 300 ensures proper placement and structural balance. The honeycomb design is not just aesthetic. It allows light to pass through while maintaining protective coverage. The pattern distributes impact across multiple contact points instead of concentrating force in one area. This structural layout enhances durability without obstructing the headlight output when properly installed. Designed Specifically for TVS Apache RTX 300 Compatibility is precise. This headlight grill is made for the TVS Apache RTX 300 and aligns with the factory headlight configuration. That means: • No universal adjustments• No forced mounting• No incompatible brackets A proper fit ensures the accessory integrates naturally with the motorcycle’s front fascia. For riders who prioritize both protection and styling, a headlight grill adds a purposeful look. It strengthens the front-end presence of the RTX 300 without appearing oversized or out of proportion. Functional Protection for Daily and Touring Use Motorcycles operating in mixed environments — highways, city traffic, or rural roads — are exposed to unpredictable debris. A headlight assembly is vulnerable because it sits directly in the path of airflow and flying particles. Adding a grill provides: • Protective shielding against small stones and debris• Reduced direct impact on headlight glass• Surface protection during long-distance touring• Additional layer of defense in unpredictable terrain It is important to understand that this accessory is designed for protection against minor impacts and debris exposure. It is not a crash guard and is not intended to prevent damage from high-speed collisions. Honeycomb Design Advantage The honeycomb pattern offers structural balance. The geometric distribution helps maintain airflow while supporting protective strength. The open-cell layout ensures the headlight beam continues to project forward without heavy obstruction when installed correctly. For riders who prefer a rugged adventure-oriented look, the honeycomb structure complements the aggressive styling of the TVS Apache RTX 300. Build and Finish • Designed for: TVS Apache RTX 300• Style: Honeycomb pattern• Application: Headlight protection The construction and finish are built to integrate with the bike’s front profile. Proper installation ensures stability and minimizes vibration. Professional installation is recommended to ensure correct mounting alignment. Practical Use Case This accessory suits: • Daily commuters riding in urban traffic• Riders covering highways and long-distance routes• Touring riders encountering gravel or broken roads• Owners seeking added front-end protection Protection is about prevention. A headlight grill is a relatively small investment compared to potential replacement costs of a damaged headlamp assembly. Warranty • 6 Months Warranty on powder coating finish.• Lifetime Warranty on stainless steel nuts and bolts. Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

The Moto Torque Head Light Guard for TVS Ronin is designed to provide structured protection to the headlight assembly while enhancing the motorcycle’s front profile. Built specifically for the TVS Ronin, this guard adds an additional layer of protection against debris, minor impacts, and external elements encountered during daily riding and touring. Engineered for model-specific fitment, the headlight guard integrates securely with the TVS Ronin’s front assembly without interfering with structural alignment. Designed for TVS Ronin • Precision fitment for TVS Ronin• Model-specific mounting design• Direct integration with stock headlight setup Protection Function • Shields headlight from debris and minor impacts• Adds front-end protection• Suitable for urban and touring use The structural frame design provides protective coverage while maintaining headlight visibility. Installation • Direct-fit mounting design• Secure bracket-based attachment Specifications • Brand: Moto Torque• Compatibility: TVS Ronin• Product Type: Head Light Guard• Mount Type: Model-Specific Bracket

Read more less

The Moto Torque Himalayan 450 Engine Guard (Aluminium) is specifically engineered for the Royal Enfield Himalayan 450 to protect the lower engine area from impact and surface damage. Designed as a sump guard solution, it shields the underside of the motorcycle during off-road riding and challenging terrain conditions. Manufactured using high-quality aluminium material, this engine guard mounts directly to the stock mounting points without compromising ground clearance. The structure is designed to maintain proper fitment while providing effective underbody protection. Made for Royal Enfield Himalayan 450 • Designed specifically for Himalayan 450• Mounts to stock mounting points• Maintains ground clearance• Protects the engine underside Functional Protection Provides protection from: • Off-road surface impact• Underbody abrasion• Harsh terrain riding• External debris contact Great protection from the harshness of off-road riding. Tested & Approved Tested and approved by CH SADDLER (Instagram name), a renowned Adventure Off-road rider. Installation Details • Direct stock mounting compatibility• Comes with “Do It Yourself” fitment guide Tools Required • Allen Key – 4 & 5mm• Spanner – Number 10 Compatibility Note This product is not compatible with the OEM guard. Specifications • Brand: Moto Torque• Compatibility: Royal Enfield Himalayan 450• Type: Engine Guard / Sump Guard• Material: Aluminium

Read more less

The Moto Torque Himalayan 450 Engine Guard (MS) is specifically designed for the Royal Enfield Himalayan 450 to provide protection against damage underneath the engine. Engineered using high-quality materials, this sump guard is developed to shield the lower engine area from impact during off-road riding and uneven terrain conditions. Designed to mount onto the stock mounting points, this engine guard is structured to maintain ground clearance while adding a protective barrier beneath the engine. Made for Royal Enfield Himalayan 450 This engine guard is designed exclusively for the Royal Enfield Himalayan 450 to ensure: • Direct compatibility with stock mounting points• Maintained ground clearance• Secure structural fitment• Protection beneath the engine casing Functional Protection The engine guard provides protection from: • Off-road surface impact• Underbody abrasion• Harsh terrain conditions• External debris contact It is built to support durability in demanding riding environments. Tested & Approved Tested and approved by CH SADDLER (Instagram name), a renowned Adventure Off-road rider. Installation Details • Designed to mount onto stock mounting points• Comes with “Do It Yourself” fitment guide Tools Required • Allen Key – 4 & 5mm• Spanner – Number 10 Compatibility Note This product is not compatible with the OEM guard. Specifications • Brand: Moto Torque• Compatibility: Royal Enfield Himalayan 450• Type: Engine Guard / Sump Guard• Material: MS (Mild Steel)

Read more less

The Moto Torque Himalayan 450 Handlebar Risers are designed and crafted specifically for the Royal Enfield Himalayan 450 to improve rider comfort and handlebar positioning. Built for riders who demand ergonomic precision, these risers are engineered to enhance comfort without compromising handlebar strength or structural integrity. When it comes to handlebar positioning, every millimetre matters. Even a small adjustment can significantly impact long-distance comfort and reduce strain on the shoulders and lower back. These risers are developed to provide that precise improvement in riding posture. Designed for Royal Enfield Himalayan 450 • Specifically engineered for Himalayan 450• Direct fitment compatibility• Maintains handlebar strength and stability Material & Manufacturing • Made from solid Aluminium block• Precision machined using Computer Numerical Control (CNC) machines The use of a solid aluminium block ensures durability and strength, while CNC machining ensures accuracy and precision in dimensions. Comfort & Ergonomics • Improves riding posture• Reduces shoulder strain• Helps minimize lower back discomfort• Designed for daily riders and long-distance travellers These risers are developed to enhance comfort while maintaining control and handling performance. Specifications • Brand: Moto Torque• Compatibility: Royal Enfield Himalayan 450• Material: Solid Aluminium• Manufacturing: CNC Machined

Read more less

The Moto Torque Himalayan 450 Panther Crash Guard is precision-engineered specifically for the Royal Enfield Himalayan 450. Designed for riders who demand strength, durability, and clean structural integration, this crash guard is built to deliver reinforced protection during demanding riding conditions. Developed as a premium protection solution, this crash guard combines heavy-duty build quality with functional design elements intended to support both adventure and urban riding environments. Built for Royal Enfield Himalayan 450 This crash guard is designed exclusively for the Royal Enfield Himalayan 450 platform to ensure: • Accurate frame alignment• Stable mounting structure• Optimized force dispersion• Secure triple mounting support The structural layout is intended to provide a stable and reliable installation when mounted correctly. Heavy-Duty Build Quality The Moto Torque Panther Crash Guard is manufactured using: • 25mm Cold Rolled (CR) mild steel tubes• Reinforced 1.6mm and 2mm wall thickness This construction approach focuses on durability and impact resistance while maintaining structural integrity under demanding riding scenarios. Shock-Absorbing Slider The crash guard features a high-impact nylon slider designed to: • Minimize force transfer to the frame• Reduce impact stress concentration• Provide additional buffering during falls The slider component contributes to controlled energy dispersion during impact. Secure Triple Mounting Structure The crash guard uses three strategically placed mounting points to ensure: • Stable fitment• Optimized force distribution• Enhanced structural rigidity This multi-point mounting design supports improved stability under load and during impact situations. Premium Fasteners The unit includes: • Stainless Steel 304 nuts and bolts These fasteners are selected for durability and rust resistance, contributing to long-term reliability. Why Riders Choose Moto Torque Built for adventure-focused riders, the Himalayan 450 Panther Crash Guard is designed to support both off-road and urban riding conditions. Its structural build and material thickness aim to deliver dependable protection while preserving the motorcycle’s stance and functional aesthetics. Warranty • Lifetime warranty on nuts and bolts• 6-month warranty on powder coating Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy. Specifications • Brand: Moto Torque• Compatibility: Royal Enfield Himalayan 450• Tube Diameter: 25mm CR Mild Steel• Wall Thickness: 1.6mm & 2mm• Slider Material: High-impact Nylon• Fasteners: Stainless Steel 304

Read more less

The Moto Torque Himalayan 450 Panther Crash Guard (Green) is precision-engineered specifically for the Royal Enfield Himalayan 450. Designed for riders who demand strength, durability, and structural reliability, this crash guard delivers reinforced protection while complementing the motorcycle’s adventure-focused stance. This green variant retains the same heavy-duty construction and triple mounting design while offering a distinct visual integration with the Himalayan 450 chassis. Designed for Royal Enfield Himalayan 450 Built exclusively for the Royal Enfield Himalayan 450, this crash guard ensures: • Proper frame alignment• Secure mounting integration• Optimized force distribution• Stable triple-point structure Its model-specific design supports accurate fitment without structural compromise. Heavy-Duty Construction Manufactured using: • 25mm Cold Rolled (CR) mild steel tubes• Reinforced 1.6mm and 2mm wall thickness This structural build focuses on durability and impact resistance under demanding riding conditions. Shock-Absorbing Nylon Slider Equipped with a high-impact nylon slider designed to: • Minimize force transfer to the frame• Reduce stress concentration during impact• Provide additional buffering during falls The slider contributes to better impact energy management. Secure Triple Mounting Design The crash guard features three strategically placed mounting points to provide: • Stable installation• Improved structural rigidity• Optimized force dispersion This design enhances overall stability under load. Premium Fasteners Includes: • Stainless Steel 304 nuts and bolts These fasteners are selected for long-term durability and rust resistance. Why Riders Choose Moto Torque Built for adventure-oriented riders, this crash guard supports both rugged terrain and urban riding. Its reinforced tube structure and multi-point mounting design aim to deliver dependable protection without altering the motorcycle’s riding dynamics. Warranty • Lifetime warranty on nuts and bolts• 6-month warranty on powder coating Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

The Moto Torque Himalayan 450 Panther Crash Guard (Red) is designed specifically for the Royal Enfield Himalayan 450. Built using rigid mild steel tubing and engineered for durability, this crash guard is developed to help protect key structural components during demanding riding conditions. The red variant maintains the same structural build and manufacturing standards while offering a bold visual complement to the Himalayan 450’s adventure-focused styling. Made for Royal Enfield Himalayan 450 This crash guard is manufactured exclusively for the Royal Enfield Himalayan 450 to ensure: • Proper structural alignment• Secure installation compatibility• Stable frame integration• Model-specific geometry support Material & Construction • Rigid Mild Steel – 25mm diameter tubes• Wall thickness: 1.6mm and 2mm• Cold Rolled (CR) tubes for strength and durability The use of CR mild steel tubes enhances rigidity and impact resistance under operational conditions. Manufacturing Process • MIG (Metal Inert Gas) Welding• TIG (Tungsten Inert Gas) Welding• Sand Blasting before powder coating• Automated CNC tube bending for precision shaping These processes are used to ensure structural strength and uniform finish. Structural Protection Coverage Engineered to protect crucial and expensive motorcycle components including: • Fuel Tank• Engine casing• Frame• Handlebar• Other exposed structural parts Fasteners • Stainless Steel 304 grade nuts and bolts• Lifetime warranty on nuts and bolts Design & Product Outlook Designed to align with the aggressive and adventurous styling of the Himalayan 450 while maintaining structural integrity. The crash guard uses high-quality rigid material intended to withstand unfortunate crash situations. Tools Required for Installation • Allen Key – 5, 6 & 8mm• Spanner – 13, 16 and 14 No. Tubular Warranty • 6 Months Paint/Powder Coating Warranty• Lifetime warranty on Bolts & Nuts Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

The Moto Torque Himalayan 450 Panther Crash Guard (Yellow) is designed specifically for the Royal Enfield Himalayan 450. Built using rigid mild steel tubing and engineered for structural durability, this crash guard is developed to protect key motorcycle components during demanding riding conditions. This yellow variant retains the same structural specifications and engineering standards while offering a bold visual match to the Himalayan 450’s adventure profile. Made for Royal Enfield Himalayan 450 This crash guard is manufactured exclusively for the Royal Enfield Himalayan 450 platform to ensure: • Accurate structural alignment• Secure installation• Compatibility with factory geometry• Stable frame integration Material & Construction • Rigid Mild Steel – 25mm diameter tubes• Wall thickness: 1.6mm and 2mm• Cold Rolled (CR) tubes for strength and durability The use of CR mild steel tubes enhances structural integrity and impact resistance. Manufacturing Process • MIG (Metal Inert Gas) Welding• TIG (Tungsten Inert Gas) Welding• Sand Blasting before powder coating• Automated CNC tube bending for precision formation These processes are used to ensure proper strength, alignment, and uniform finish. Structural Protection Coverage Engineered to protect crucial and expensive components including: • Fuel Tank• Engine casing• Frame• Handlebar• Other exposed structural parts Fasteners • Stainless Steel 304 grade nuts and bolts• Lifetime warranty on nuts and bolts Design & Product Outlook Designed to match the aggressive and adventurous look of the motorcycle while maintaining structural rigidity. The crash guard uses high-quality rigid material intended to withstand unfortunate crash situations. Tools Required for Installation • Allen Key – 5, 6 & 8mm• Spanner – 13, 16 and 14 No. Tubular Warranty • 6 Months Paint/Powder Coating Warranty• Lifetime warranty on Bolts & Nuts Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy.

Read more less

The Moto Torque Himalayan 450 Radiator Guard (SS) is designed and made specifically for the Royal Enfield Himalayan 450. Built using stainless steel 304 grade material, this radiator guard is engineered to protect the radiator from damage while enhancing the front and side profile of the motorcycle. Inspired by the Leopard design pattern, the guard delivers both structural protection and visual enhancement. Designed for Royal Enfield Himalayan 450 • Custom-built for Himalayan 450• Reverse engineered for precision fit• Seamless integration with the vehicle• Direct fitment design Material & Construction • Stainless Steel 304 Grade• Lifetime Warranty on material• Neatly buffed finish to highlight matte grain texture The stainless steel construction ensures durability and long-term resistance against corrosion. Functional Protection • Protects the radiator from damages• Ideal for riders who constantly ride off-road• Enhances front and side view appearance Designed to safeguard the radiator against debris, impact, and harsh riding conditions. Design & Outlook • Inspired by Leopard design• Enhances motorcycle aesthetics• Precision-manufactured for exact fitment Warranty • Lifetime Warranty on Stainless Steel 304 Grade Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy. Specifications • Brand: Moto Torque• Compatibility: Royal Enfield Himalayan 450• Material: Stainless Steel 304 Grade• Finish: Neatly buffed matte grain

Read more less

The Moto Torque Himalayan 450 Saddle Stay is designed specifically for the Royal Enfield Himalayan 450 to provide structured support for saddle bags during touring and daily riding. Built using rigid mild steel tubing, this saddle stay is engineered to carry luggage weight while maintaining the motorcycle’s balance. Designed to support saddle bags without interfering with the riding dynamics, the structure focuses on strength, stability, and precise fitment for the Himalayan 450 platform. Made for Royal Enfield Himalayan 450 This saddle stay is manufactured exclusively for the Royal Enfield Himalayan 450 to ensure: • Proper structural alignment• Secure mounting compatibility• Stable integration with the rear frame• Model-specific geometry fitment Material & Construction • Rigid Mild Steel – 19mm diameter tubes• Wall thickness: 1.6mm• Cold Rolled (CR) tubes for strength and durability The use of CR mild steel enhances rigidity and resistance against abrasion during riding. Manufacturing Process • MIG (Metal Inert Gas) Welding• TIG (Tungsten Inert Gas) Welding• Grid blasting before powder coating for uniform finish• Automated CNC tube bending for precision formation These processes contribute to structural strength and finishing consistency. Functional Design • Designed to support saddle bags during adventure touring• Maintains bike balance while carrying luggage• Lower stays that carry saddle bag weight are removable• Can be installed or removed according to rider requirements The structure is built to provide luggage support without affecting handling dynamics. Fasteners • Stainless Steel 304 grade nuts and bolts• Lifetime warranty on bolts & nuts Tools Required for Installation • Allen Key – 5 & 6mm• Spanner – 10 & 13 No. Warranty • 6 Months Paint/Powder Coating Warranty• Lifetime warranty on Bolts & Nuts Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy. Specifications • Brand: Moto Torque• Compatibility: Royal Enfield Himalayan 450• Tube Diameter: 19mm• Wall Thickness: 1.6mm• Material: Cold Rolled Mild Steel• Welding: MIG & TIG• Fasteners: Stainless Steel 304

Read more less

The Moto Torque Himalayan 450 Saddle Stay (Yellow) is designed specifically for the Royal Enfield Himalayan 450 to provide structured support for saddle bags during touring and daily riding. Built using rigid mild steel tubing, this saddle stay is engineered to carry luggage weight while maintaining the motorcycle’s balance. This yellow variant maintains the same structural build and manufacturing standards while offering a bold visual complement to the Himalayan 450’s adventure styling. Made for Royal Enfield Himalayan 450 Manufactured exclusively for the Royal Enfield Himalayan 450, this saddle stay ensures: • Proper structural alignment• Secure mounting compatibility• Stable integration with the rear frame• Model-specific geometry fitment Material & Construction • Rigid Mild Steel – 19mm diameter tubes• Wall thickness: 1.6mm• Cold Rolled (CR) tubes for strength and durability The use of CR mild steel enhances rigidity and resistance against abrasion during operation. Manufacturing Process • MIG (Metal Inert Gas) Welding• TIG (Tungsten Inert Gas) Welding• Grid blasting before powder coating for uniform finish• Automated CNC tube bending for precision shaping These processes contribute to strength, finish quality, and structural consistency. Functional Design • Designed to support saddle bags during adventure touring• Maintains bike balance while carrying luggage• Lower stays that carry saddle bag weight are removable• Can be installed or removed according to rider requirements The structure is built to provide luggage support without affecting handling dynamics. Fasteners • Stainless Steel 304 grade nuts and bolts• Lifetime warranty on bolts & nuts Tools Required for Installation • Allen Key – 5 & 6mm• Spanner – 10 & 13 No. Warranty • 6 Months Paint/Powder Coating Warranty• Lifetime warranty on Bolts & Nuts Note: Rawtorque does not provide a separate warranty beyond the manufacturer warranty. For complete terms and claim procedures, please refer to our warranty policy. Specifications • Brand: Moto Torque• Compatibility: Royal Enfield Himalayan 450• Tube Diameter: 19mm• Wall Thickness: 1.6mm• Material: Cold Rolled Mild Steel• Welding: MIG & TIG• Fasteners: Stainless Steel 304• Color: Yellow

Read more less